HPL 11.1.2.3: How to create application of EPMA planning with database ASO.

Similar Questions

• How to create a file name variable with the County and the date?

  Objective: Create a file name variable with the County and the date

  Error: get a lot of error. Do you know how to change my code?

  Question: how to create a file name variable with the County and the date?

  Mini code:

  std::string * rawfilepath;
  std::string * rawfilename;

  rawfilepath = "./shared/documents/";
  RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
  QFile file (rawfilename);
  If (file.exists ()) {}
  rawfilenamecount ++;
  RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
  }

  Thank you for your attention,

  Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.

  Solution is below.

  While (access (rawfilename, F_OK)! = - 1) {}
  rawfilenamecount ++;
  sprintf (format, RawFileName, rawfilenamecount);
  fprintf (stderr, "file exists");
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "System Time (ms)" "");

• How to create a user local administrator with the user root on the CV

  As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.

  Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd.  See the reference section of command of the VCS Administrator's Guide, starting on pg 517.

  If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.

• How to create a my Signature (signature with the tablet of manufacturing) Action?

  How to create a my Signature (signature with the tablet of manufacturing) Action?

  I use PSCS6?

  I have no problem making an action of signature if I pick a font and then type in my name,

  but to make a real action of my signature seems impossible.

  Hello

  There is a very cool technique to do by your signature in a Photoshop brush.  Once this is a brush, you can change the size and place the signature everywhere where you want.

  Google "Photoshop brush signature" or something similar and you will see a lot of tutorials.  Try this one:

  Photoshop reference guide | Creating a custom brush Signature | Peachpit

  Basically, you sign your signature on a blank piece of paper, then you scan in a JPG or TIFF file, then you open that file in PS to create a brush.

  I hope this helps.

  John

• How to create a form of relief with highlight on the edge, in 2015 of the Illustrator

  I work in 2015 of the Illustrator. How to create a shape (3d) raised with highlighted on the edge, like this:

  

  It will work as a form, not a button, so there is no need of different States. I looked at a few tutorials to create buttons, and they seemed much more complicated that I think you need to create a form like this.

  -Stuart

  Experience 3D bevel & emboss, front view and Tall-round bevel. Adjust the lighting you want. Then add a light shade.

  Personally I have always found these bevel unsatisfactory effects, but you can produce similar results using carefully controlled mixtures

• How to create the object rectangular box with a pure action script.

  How to create the object rectangular box with a pure action script?

  I think, it can be done through the clip library, but I'm not sure. Please, I want to take the suggestion to create a rectangular box as a script through

  Take a new file and write about the first image the code below, it works fine:

  var rect = new Shape();
  rect.graphics.beginFill (0xFF0000);
  rect.graphics.drawRect (0, 0, 100,50);
  rect.graphics.endFill ();

  var MC = new MovieClip();
  mc.addChild (rect);
  addChild (mc);

  If this doesn't solve your problem then paste the error you get

• Hi all, can I know how to create filters in Hyperion Planning Application?

  Hi all, can I know how to create filters in Hyperion Planning Application?
  
  
  I don't know how to create filters in the Planning Application. but my boss asking me to create filters.
  
  Thank you and best regards,
  Stéphane

  Go to Administration > Dimensions > select a Dimension > select the Member you want to assign filters acccess to:-assign access
  Repeat the process for all the access permissions.
  If there is a lot of permissions set you could use a utility:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
  Refresh planning, including security filters
  Also have a read of:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to create a new power plan that includes key backlit stop?

  I can't find any setting in the advanced power properties dialog box. Toshiba has provided a power eco plan. It's OK for me except the pilot. So I tried to create a power plan as eco with night light 1 hour not 5 minutes.
  However, this plan does not backlight key off.

  How can I create a new power plan that includes key backlit stop?

  Have you tried to change the power management Windows including power advanced for certain power plan options?
  For example, you can use balanced plan or standby power, change it and that s it.

• How to create a new auto sync with Salesforce?

  We try to create a new automatic synchronization so that we can test with a second profile of Salesforce integration, but I don't see anything on the screen Auto Synchs which shows how to create a new.

  Anyone has any ideas on where to start?

  Installation--> integration--> inbound--> create Data Sources

  Create a new external call and make sure that CheckBox 'calendar for automatic execution' this will allow this call for automatic synchronization. I will link an article shortly...

  Edit: Surprisingly, I can't find an article dedicated to the implementation of an automatic synchronization, but you can renovate sort of article to meet your needs for a walk through...

  Navy Playbook: Change Email in CRM

• How to create link db to access other databases for specific user tables

  Hi Experts,

  You want to create db link:

  Please create a dblink, a native of PSOLDB (proddta, owner) and the PSOLPP (owner of the CMR) destination.

  GRANT SELECT, UPDATE, DELETE

  Database: PSOLPP

  Owner: RMC

  TABLES: F5560052, F5560011, F5560053, F5560001, F5560002, F5560535, F5560035, F5560537, F5560538, F5560080, F5560081, F5560092, F5560100, F5560101, F5560102, F5560105, F5560103, F5560104, F5560004, F5560003, F5560200 and F5560110

  My question is how to create db connection for access of the user of the CMR tables in database PSOLPP, and a question arises in my mind is if we create DB link for user CTMR, it will access all tables in the schema of RMC, but we need only access some tables (above tables only)

  Please advice

  Thank you

  
  Sam

  You can

  Create another user in the PSOLPP database.

  Give all the privileges the user created on rmc tables

  create database PSOLDB (owner of proddta) link to the new user.

• How to create a new virtual machine with two warehouses of data through new-vm?

  Hi guys,.

  Can you please help or direct me to the right format? I'm new with vsphere powercli.

  How to create a virtual machine with two other data store by using the new-vm?

  $datastore1 = get-datastore. WHERE-object {$_.} Name - eq "lun1"}

  $datastore2 = get-datastore. WHERE-object {$_.} Name - eq "lun2"}

  new-vm-name vmtest01 - VMHost ESXserver - datastore $datastore1 diskmb - 8192 $datastore2 diskmb - 8192 - memorymb 4096 - numcpu 2 - ID winNetStandardGuest

  I got this error when I run vsphere powercli. I appreciate if you can help. Thank you

  New-VM: cannot bind parameter 'DiskMB '. Cannot convert the 'lun2"val

  EU to type 'VMware.VimAutomation.ViCore.Impl.V1.DatastoreManagement.DatastoreIm '.

  PL"type"System.Int64 ".

  At line: 1 char: 85

  + new-vm-name vmtest01 - VMHost ESXserver - $datastore1 data store

  diskmb - < < < < 8192, $datastore2 - diskmb 8192

  + CategoryInfo: InvalidArgument: ( , ParameterBindingE)

  Xception

  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat

  ion.ViCore.Cmdlets.Commands.NewVM

  Bryan

  The New-VM cmdlet takes a single value of the parameter - data store and all of the virtual disks will be located on this data store.

  If I understand your request, you create a virtual machine with 2 virtual disks, each on a different data store.

  You can use the cmdlet New - hard drive for it.

  $datastore1 = get-datastore | where-object {$_.Name -eq "lun1"}
  $datastore2 = get-datastore | where-object {$_.Name -eq "lun2"}
  
  $vm = new-vm -name vmtest01 -VMHost ESXserver -datastore $datastore1 -diskmb 8192 -memorymb 4096 -numcpu 2 -GuestId winNetStandardGuest
  new-harddisk -vm $vm -datastore $datastore2 CapacityKB (8192 * 1KB)
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to create criteria to display named with the EXISTS operator?

  I use JDeveloper 11.1.1.2.0. In Guide of Fusion Developer's for Oracle Application Development Framework in the section "How to Create Named views criteria declarative 5.11.1" I found figure '5-41 Edit View dialog with a view specific criteria criteria", which used the EXISTS operator. But I can't repeat this example in my project, coz I can't find operator EXISTS in the list of choices. ?:|
  
  link to the image: [http://img23.imageshack.us/img23/1708/jdevexists.jpg]

  Vitaly,

  I checked this in 11.1.1.3, YMMV Yes.

  The operand EXISTS is fine for me. According to the document that you referenced (at least in 11.1.1.3 docs), you can use the operand EXISTS when the "attribute", you select another VO referenced via a link display:

  The list shows only the operators that are appropriate for the selected
  object attribute or view. In the case of a selection of objects in view, it is
  operator applies a standard of display you set (or reference) as a
  operand

  John

• How to create a legislative base graphics with illustrator?

  What is the procedure to create a sitting legislative chart with illustrator. Some examples of these maps:

  • https://upload.wikimedia.org/Wikipedia/Commons/thumb/6/6D/11th_Parliament_National_Assembl y_Kenya.svg/360px-11th_Parliament_National_Assembly_Kenya.svg.png
  • https://upload.wikimedia.org/Wikipedia/Commons/thumb/a/AC/14thNationalAssemblyOfPakistan.s vg/512px-14thNationalAssemblyOfPakistan.svg.png
  • https://upload.wikimedia.org/Wikipedia/Commons/thumb/6/62/House_of_the_People%2C_India%2c _ 2012.svg/360px-House_of_the_People%2C_India%2C_2012.svg.png

  Please help me. Would be thanful if someone tells me.

  Help!

  Asad,

  I had forgotten the crucial information of CS3.

  Thank you for pointing it out, Monika.

  Here is a new set of instructions with pictures, based on mixtures, to appear as suggested in the post #13, only nicer and cleaner:

  (1) create a circle of filling/nostroke with W = H = 2pt;

  (2) copy 1) at a proper horizontal distance, then copy 10 below, then create mixes of each of them with object > mix > Options set to focus = align on the path and the specified steps = 21, 24, 27, 30, 33, 36, 39, 42, 45, 48 and 51, applied to each game to get all the mixes to be applied on the reverse;

  (3) create a circle of vascular accident brain/nofill with W = H = 105pt and cut it to side Anchor Points, select the low center reference Point in the Transform palette and remove the bottom half;

  (Copy 4) 3) and set W = 45pt, now you should have circles outside and inside;

  (5) purpose > mix > blend Options, define the specified steps 9 and align the value Orientation on the track;

  (6) object > blend > make, now you should have 11 a half circles.

  (7) object > blend > expand, now you should have 11 independent semicircles.

  ((8) select each circle 7) with corresponding mix 2) and object > blend > change the meaning;

  (9) object > decompose the appearance and Ctrl / Cmd + SHIFT + G to ungroup, now you just need to have all the points like individual trajectories;

  (10) select the points to be repainting and repainting them.

  With the numbers you use you get quite nice models of completely round points; the odd difference in number dot a half circle to the other will ensure that you switch between one and two points at the top.

  Here is an image to four times the mentioned size, with slightly changed in red, gree and blue:

  

• How to create a disc of eagerZeroedThick with Powershell

  Hi all

  I would like to create a disc of eagerZeroedThick with power (this is necessary for shared MSCS cluster disks) with powershell...

  Looks like it's not available under the VIPowershell cmdlet

  I have the following code... but it breaks down during the CreateVirtualDisk. Please can you help me?

  Write-Host "recover: Instance of the Service...". »

  $svcRef = new-object VMWare.Vim.ManagedObjectReference

  $svcRef.Type = 'ServiceInstance.

  $svcRef.Value = 'ServiceInstance.

  $serviceInstance = get-views $svcRef

  #

  Write-Host "recover: virtual disk manager".

  $vdm = get-view $serviceInstance.Content.VirtualDiskManager

  #

  Write-Host "get back: new virtual HARD drive Spec.

  $vHddSpec = new-Object VMWare.Vim.FileBackedVirtualDiskSpec

  $vHddSpec.CapaciptyKB = 102400

  $vHddSpec.DiskType = "eagerZeroedThick" # required for the Cluster shared disk

  $vHddSpec.AdapterType = 'free' # required for the Cluster shared disk

  #

  Write-Host 'create cluster disk '.

  $FilePath = "[HQESXU0021_Local] Test1.vmdk.

  $ds = get-data store HQESXU0021_Local

  $vdm. CreateVirtualDisk ($FilePath, $ds, $vHddSpec)

  Note1: the thing when you want to use the VirtualDiskManager methods you must connect to the ESX Server not the VC!

  Note 2: the disk name must be a valid data store path.

  This means that you must use the following notation:-]

  Note that there is a space between the closing brackets and the name of the folder for eb.

  [Example: \[myds\] vm1/vm1 - quorum.vmdk

  Note3: when you connect to the ESX Server there is only 1 data center with the default name "ha-datacenter".

  Note4: the CreateVirtualDisk method connect the new drive to any virtual machine.

  The script would then become something like that

  Connect-VIServer -Server  -User  -Password 
  
  Write-Host "Retreive: Service Instance..."
  $serviceInstance = get-view ServiceInstance
  #
  Write-Host "Retrieve: Virtual Disk Manager"
  $vdm = Get-View $serviceInstance.Content.VirtualDiskManager
  #
  Write-Host "Retrieve: New virtual HDD Spec"
  $vHddSpec = new-Object VMWare.Vim.FileBackedVirtualDiskSpec
  $vHddSpec.CapacityKB = 102400
  $vHddSpec.DiskType = "eagerZeroedThick"      # mandatory for Shared Cluster disk
  $vHddSpec.AdapterType = "lsiLogic"           # mandatory for Shared Cluster disk
  #
  Write-Host "Create cluster disk"
  $FilePath ="[myds] Cluster/cluster-quorum.vmdk"
  $dc = Get-datacenter "ha-datacenter" | Get-View
  
  $vdm.CreateVirtualDisk($FilePath, $dc.moref, $vHddSpec)
  

• create active enforcement of planning with the quarters.

  Hi all
  
  How to use an application of planning with the quarters active in 11.1.2.1 with 12 months included. Is there a way to create an active application with quarters?
  
  Thank you very much

  Create the custom application with a period, and then add the quarters in the period dimension once the application has been created.

  See you soon

  John
  http://John-Goodwin.blogspot.com/