HPPavilion slimline s7600n with processor AMD Athlon 64 3500 considered 32 or 64 bit for windows 7 upgrade

Similar Questions

• museums of 15N: what is the maximum ram I can put in Pavilion 15N with processor AMD RADEON

  What is the maximum ram I can put in Pavilion 15N with processor AMD RADEON?

  Hello.

  The capacity is 16 GB maximum supported RAM in this model, you can go ahead and update if you want to.

  In addition, you can take a look at the technical details of your laptop and follow the steps to change the RAM:

  http://h10032.www1.HP.com/CTG/manual/c04402649.PDF

  I hope this helps.

  See you soon!

• Microsoft Natural 4000 ergonomic keyboard with IntelliType 8.15 64-bit for Windows 7, some keys are not function (new, open, undo, redo, fence, etc.) in Office 2010

  Hello MSFT sensi.
  I need help. I have the Microsoft Natural ergonomic 4000 keyboard with IntelliType 8.15 64-bit for Windows 7 installed. I run on a brand new i7 with 9 GB of ram and 1 TB of hard drive.  I just installed Office 2010.  Have you tested this keayboard with Office 2010?

  I bought and returned 2 of these keyboards at my local dealer and two keyboards have the same problem. Preconfigured keys (help, undo, redo, new, open, close, reply, fwd, send, spell, save and print) F1 - F12 do function not all as they are indicated in MS Word 2010 etc. I was able to program my favorites 1-5 with little problem.

  I did the following to try to resolve the problem:
  1. research of virus (clean)
  2. uninstalled the driver and downloaded the last strand 8.15 64
  3 entered the keyboard layout configuration and reset the default settings
  4 tried to manually program the F1 - F12 function keys

  NONE of these things solve the problem.  Which brings me to the conclusion that this keyboard does not have to be 100% compatible with Office 2010.

  Any suggestions / feature of configuration problems feature keys?

  PS. No, I didn't record this keyboard, because is it not there no solution - he goes back to the retailer.

  To the right of the function keys, there is a key LOCK.

  Toggle this button to toggle between the keys F1 to F12 with their usual function and the functions listed in the relevant programs.

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• I am running winxp sp2 with a processor AMD Athlon XP2800 + 2.08 GHz. Will this work after March 2017?

  The version of Windows XP SP2 is 2002. The PC has 1 GB of ram. I can provide more information if you need. I just need to know if it will work after March 2017. Thank you, Nick

  Come 2017 Firefox 52.0 ESR seems to be your best option to continue to use Firefox for as long as possible. How this will work it is something else.

• HP Pavilion Notebook incompatible with processor AMD PHENOM II N660 g6

  Hello

  I'm having a problem with the upgrade of processor in my laptop.

  Product name: HP Pavilion Notebook PC g6

  Product number: QJ283EA #ABU

  The processor I bought is an AMD Phenom II N660, which is supposed to be compatible according to this pdf:

  http://www.HP.com/CTG/manual/c02770249.PDF

  However when I took my laptop apart to place the new processor, the processor socket does not match the pins of the processor. Hope that makes sense? I'm not an expert in computers, but have some knowledge about them.

  What can I do? I can do to solve this problem, such as buying a new CPU socket or is this something that can be changed? From what I can tell the processor seems to be compatible according to the information on the above pdf file, shouldn't the pins so the same thing?

  Thanks for reading and I hope that someone knows how to help me!

  If the initially installed CPU of AMD E-Series, then the card system accepts only processors socket BGA413 .

  If the CPU is an AMD processor, A-series then was FS1

   

  
  The CPU you have purchased is a Socket S1 type (S1g4).

  The upgrade of the processor requires a bit more to watch maintenance & Service guide as a reference. The guide assumes that you have all the knowledge of the accessory. This is why tt is intended for HP Service centers and technicians.

   

  Kind regards

  ERICO

• ESX3.5 U2 blue screen with processor AMD daul

  We have a problem with ESX3.5 u2 start with the daul core AMD CPU, when ESX3.5 Initializes the timer, it willreport the error as follows:

  ;----

  ---

  TSC: cpu0:0 4552357591) initialization calendar...

  TSC: cpu0:0 10150276678) Init: VMKernel:718: cpu 0: tsc measured speed 2800112697 Hz, 2800112697 Hz (using TSC) CPU speed, bus speed 200008050 Hz

  Could not find a usable reference clock

  ;----

  ---

  and after Debug us we found, it seems, it cannot initialize the ACPI PM timer and daul AMD processor cannot find the reference count, so it will signal you the error.and qual hearts AMD processor, is not also initialize the ACPI PM timer, but he will refer to the timer with TSC. So, how ESX3.5 u2 detect ACPI PM timer and initialize it? By the FACT of the ACPI table? How ESX3.5 U2 can do qual AMD processor can reference with TSC, why Daul CPU can not?

  and we have another issue with ESX3.5 u2 start when we activated the HPET function, it will report as follows;

  ;----

  ---

  init IO_APIC IRQ

  IO-APIC (apicid-PIN) 2-2, 2-16, 2-17, 2-18, 19 / 2, 2-20, 2-21, 2-22, 2-23 not connected.

  .. TIMER: vector = 0 x 31 pin1 = 0 pin 2 =-1

  .. MP-BIOS bug: 8254 timer connected to IO-APIC

  ... try to put in place the timer (IRQ0) through the 8259... has failed.

  ... try to set up the timer like Virtual Wire IRQ... failed.

  ... try to set up the timer like ExtINT IRQ... unexpected trap IRQ vector 07

  trap unexpected IRQ to the vector 07

  failure: (.)

  Kernel panic: IO-APIC + timer does not work! rant [email protected]

  ;----

  ---

  So, how ESX3.5 U2 to check with these?

  Thank you very much.

  Is what brand/model of server? Is it in the version of ESX 3.5 certified list? What family of AMD processor?

  I got something similar on a whitebox server before where a bunch of stuff from power management enabled (' Quick ' n and calm "or something like that) which distorted speed CPU and timers like her in tray autour CPU running just as fast as necessary. For virtualization, you need all this out...

• is a processor AMD Athlon XP 2800 + ok to update on the new firefox?

  My computer meets all the other specs, but I don't know how the athlon compares to versions of the Pentium.

  Yep, that meets the requirements of system for Firefox 6.

• HP Pavilion: hp pavillion 360 13 inches with processor AMD A8 x don't auto rotation

  I brought my laptop from office max today and I can't get auto rotation feature work I tried to look online goes in the windows settings, but not response

  Hi @AustinBanks ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion 13-a013cl x 360 convertible and the auto rotation does not properly. I would make sure that all updates have been made on the laptop first. Reboot the laptop.

  Here is a link to show you how to set up and disable the screen rotation function. Check first that has not been disabled.

  I hope this helps you.

  Thank you.

• I need to upgrade to windows vista service pack 2 if my computer's processor amd athlon (tm) 64 x 2 dual core 3800

  If I need to upgrade to service pack 2, which is the one I need for my computer

  It is recommended to always update the pack of most recent service, because it solves a lot of problems and increases the stability of the system.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I just upgraded to vista 64-bit for windows home 7 home 64-bit away from the occational blue screen of death. Now with windows 7 the problem of blue screen that happens all the time. How can I fix?

  More information about the problem:

  BCCode: 116

  BCP1: FFFFFA8003FC44E0

  BCP2: FFFFF8800FFD2230

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\122809-22526-01.dmp

  C:\Users\Owner\AppData\Local\Temp\WER-41667-0.SysData.XML

  The upgrade in the hope of resolving a problem, it's rarely a good idea.

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.
  [Source: http://msdn.microsoft.com/en-gb/library/aa469184.aspx]

  I suspect that you need an update of the graphics driver or a new card chart or food to cope.

  In any case this has nothing to do with Windows Update. Post here to get help: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Setup error ODAC 12 c R4 client on the same machine with Oracle 11 g 64 bit for Windows database

  I have Oracle objects and mobile application development with:

  Windows 7 64-bit OS

  Base Oracle = C:\ORA

  Database Oracle 11 g 64-bit 201, home = C:\ORA\DB11G201

  I was running in Visual Studio 2010 and the ODAC customer Oracle 32-bit in another home = C:\ORA\DB11G201CLIENT32

  All was well for a few years on that set up.

  I decided to upgrade to Visual Studio 2013 and .NET 4.5

  Deletion of Visual Studio 2010 and installed Visual Studio 2013.

  I did a normal uninstall of the Oracle 11 g 32-bit client using the rebooted, Oracle Universal Installer.

  The customer old house was gone.

  I downloaded the ODP.NET12C 32-bit Oracle with VS tools R4 and began the installation of the client.

  I selected English and built-in OS account

  I chose Oracle base = C:\ORA

  I chose hone Oracle = C:\ORA\DB12CR4CIENT32

  But I encounter the error:

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  The owner of C:\ORA's ADMINISTRATORS.

  When should I do?

  For guests of 12 c, opened a NEW BASE and a NEW HOUSE?

  Created an ACCOUNT to STANDARD USER and the select statement, but keep c:\ORA and the new C:\ORA\DB12CR4CIENT32 of the House?

  I'm a hold out for migration to Oracle 12 c database because they thrown into the very useful tool Oracle Database Control and replaced by something watered down.

  So I like to keep the Oracle 11 g 64-bit database.

  but Visual Studio 2013 support, use the 12 c R4 32-bit and 64-bit support drivers unmanaged.

  I would use (and use) Managed drivers, but they do not work in database 11g FIPS-140 active environments.

  Thank you for your help and comments.

  Hello

  This is expected because you install 12 c in Base Oracle who has home 11g.

  From 12 c, the installation program has promoted "Oracle Home User' where you can perform the installation with built-in admin user or a secure non-admin user.

  As documented at https://docs.oracle.com/database/121/NTCLI/install.htm#NTCLI1283

  "Oracle 12 c Release 1 (12,1) database client may not share basic Oracle with houses of the Oracle database versions, such as Oracle Database 11 g Release 2 (11.2) and sooner."

  Please see the information listed in the link above for more information.

  Bascially, you need to install in a different Oracle Base and can have all this work.

  Kind regards.

• Can't 'open with... '. InCopy.exe' in InCopy CC 2014 for Windows

  To say I'm frustrated would be friendly to Adobe... I'll really try to remove my sarcasm and criticism how incompetent programmers of Adobe and program, managers should be to allow these problems to exist...

  I have a few documents InDesign (.indd) that I want to click on and the InCopy value as default program. After some trial and error, on both systems, I was able to adjust the registry to get this working.  On the third, so far, I've tried:

  1 reinstall Incopy - did not work

  2. copy the InCopy.exe to WWXXYYZZ. EXE - and although it allows InCopy appear in the list of "other programs", it does not open. Then...

  3. I tried the registry WWXXYYZZ. EXE and replace all instances with InCopy.exe (why I copied it this weird name in the first place - the easier the registry search - it did not work.

  4 published the following registry locations to make sure that they stressed InCopy.exe - but every time I have change for this exe, Windows will not open.  I don't know Adobe want to blame Microsoft for this, but when EVERY SINGLE OTHER executable (and even the renamed copy) CAN be assigned to open it using the 'Open with' dialog box, I let believe that Adobe programmers decided not to do the right thing by saving the exe file with the registry - or recorded to prevent from appearing in this menu , for some reason any.  SO HOW CAN I FIX THIS!

  Edited registry (reset to point to InCopy.exe) locations:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\OpenW ithList]

  "a"="InCopy.exe".

  "MRUList" = "a".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\UserC post]

  'Progid"="Applications\\InCopy.exe '.

  [HKEY_USERS\{ReplacedGUID}\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.in dd\OpenWithList]

  "a"="InCopy.exe".

  "MRUList" = "a".

  [HKEY_USERS\{ReplacedGUID}\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.in dd\UserChoice]

  'Progid"="Applications\\InCopy.exe '.

  [HKEY_CURRENT_USER\Software\Classes\indd_auto_file\shell\Read\command]

  «"@= 'InCopy CC 2014\\InCopy.exe\ \"C:\\Program Files\\Adobe\\Adobe' \"%1\»»

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\OpenW ithList]

  "a"="InCopy.exe".

  "MRUList" = "a".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\OpenW ithProgids]

  "InDesign.Document" = hex (0): "."

  I'll say it again - HOW DO I TROUBLE INCOPY to OPEN YEAR INDESIGN DOCUMENT BY DOUBLE CLICKING? (and Yes, I'm not that screaming!)

  No thank you completely useless people at adobe, I got that work - I found a registry key that had the previous version of InCopy and once I deleted, I could now do a right click and 'Open with' InCopy and affect permanently.

• Purchase desktop with Vista above... is there a "free" or discounted for Windows upgrade?

  About 6 years ago I bought a new edition special desktop HP Pavilion at Future Shop.  Now I don't get updates, or the software corrects more.   Windows 10 is free for new versions...  Is there a discounted '10' for Vista and earlier versions of windows?   If I have to pay full price, this will be the 5th time that I pay for a new version of windows.  Please let know us if there is a download available.

  Louis Kish

  Hello

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade or discounted Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• HP Compaq CQ56-102sa AMD Athlon 2 P320 processor more?

  Hello

  I just bought a CQ56-102sa opportunity to replace my dead 250ea. all in vain tried to correct my 18mo 250ea (CPU blink codes into the boot attempt - not fixed not by the CPU, motherboard replacement probably dead) I replaced the CPU and found that the thermal paste on the original was only haf and what existed was soaked and dried up.

  As the 'new' 102sa is even older, I intend to redo the thermal paste soon. While I'm here in any case I have a processor AMD Athlon P320 2 spare and would like to know if anyone can tell me if this would be a compatible upgrade. I was able to find other models of the 100 series with this cpu as the standard, but not any information about my specific model.

  Hey peterjammo,

  I did some research and found the following information on this page.

  «Compared to microprocessors series V, the Athlon II P320 offers the same TDP on the same clock frequency, while having an extra processor.» This is why AMD P320 can serve as an upgrade at low prices for series V UC. "While the replacement of the V-series with this model Athlon II processors will not cause better performance by hearts, overall responsiveness of the system will be better and performance in some applications multi-threads will be almost twice as high as V-Series chips.

  Please let me know if you have any other questions! I'll keep an eye out for your answer