HTML display appears spread - spaced

Similar Questions

• Portege M400: Display appears on the side to the Port Replicator

  Hi all

  M400 laptop when starting at the port replicator will display the screen on the side. I must then, open the laptop screen and set the display in normal mode. When I'm correct display turn the laptop off and back on the display appears again on the side... Turning on a laptop without port replicator, portable computers the display is correct. What is going on. How to set the default display when in normal port replicator?

  Thank you

  These sound like the laptop would turn to Tablet mode after connection to the raplicator port.
  I think it has a bad setting in the utility of rotation.
  You must enter this utility and check the PC mode and the Tablet PC settings.
  I think that the parameters must be defined on primary landscape

  In addition, I would recommend checking the Toshiba mobile extension tool that is placed in the control panel.
  There is a tab to display change. Here you can activate the service of display change

• Satellite L500 - clicking IE "internet page cannot be displayed" appears

  When I click on the internet Explorer icon 'internet page cannot be displayed' error message appears.

  I have to use the 64-bit internet explore to use internet.
  I also have problems to download Skype.

  These problems are related?
  Why internet will not work using the icon of internet explore?

  Please notify. Thanks in advance for your help.

  Hello

  The message "internet page cannot be displayed" appears because there is no internet connection!
  You must first check if the laptop is properly connected to the internet!

  LAN and WLan connection.

  You can also use the Firefox browser instead of Internet Explorer but if id not available internet connection, then the firefox browser does not display anything like IE too.

• Display/appearance properties doesn't let me choose the XP Style for windows and menu items, etc.

  My XP Pro crashed, and the only solution was a re - format and re-install. Once back online, updates installed (64 of them!) and one or more of them now changed my appearance Office (from blue to gray, boxy... classic windows XP theme around the time of Win 95), display/appearance properties refuses to allow me to choose the XP Style. How can I fix?

  Thank you
  -- ! elbakrameR®-

  Start the themes service? See the following article for resolution.

  You cannot change your desktop theme in Windows XP:
  http://support.Microsoft.com/kb/883391
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Index.html not appearing is not in the browser

  I have a page that I built to validate on w3c.org site as valid, but the page does not appear on a browser.  http://www.automobileclearinghouse.com/VillageInn/index.html is not sure what I'm doing wrong, any help would be appreciated.  I must specify that the page is not completely done but should appear with what's there?

  You have two errors in your CSS:

  (1) change your container like this:

  . Container {}

  Width: 990px;

  height: 1350px;

  }

  In the above code, there is a period before the container of the word;  If you don't see it, just copy and paste what I gave and take care of it;

  (2) your body has the property of display: none;  Remove it and it should work.  That's what I did:

  {body

  do-family: "Comic Sans MS", cursive;

  text-align: left;

  vertical-align: baseline;

  Word-spacing: 1.50em;

  / * display: none; */

  Width: 1020px;

  height: 1350px;

  position: fixed;

  color: # 356-86;

  font size: 20px;

  margin left: 30px;

  background-image: url (http://www.automobileclearinghouse.com/VillageInn/Assets/Background.png);

  background: No.-repeat;

  }

  I simply commented and it should work.

  Good luck.

• Flex and HTML displayed shift in Safari under Mac OS

  When a popup is displayed in Flex app, Flex display gets moved down in Safari under Mac OS only. However, even if the screen is shifted down, orders appear to be in the correct position. For example, to click on a button, the cursor must be a few pixels above illustrated screen. Not only the Flex display moves down. Display of HTML links also moves down with Flex and the links are clickable a few pixels above the screen.

  The problem occurs only when to trigger the display of popup Flex flex long screen. On a screen of Flex in the height of the browser, with the same actionscript and Javacsript code there is no problem.

  It works fine in all other browsers like Safari in windows.

  All the world is facing this scenario? Any help will be much appreciated.

  The following code is used for the popup to display in the center of the viewable area.

  callLater (SMBObjectUtil.changePosition, args);

  In the SMBObjectUtil.as file.

  public static function changePosition (int x, y, obj:UIComponent):void { }

       var yPos:int = ExternalInterface.call("saveglobalscore",score) ("findScrollTop");

       var winHeight:int = ExternalInterface.call("saveglobalscore",score) ("getWindowHeight");

       var appHeight:int = Application.application.height;

       var objectWidth:int = obj.width;

       var objectHeight:int = obj.height;

       var calculatedX:int = 0;

       var calculatedY:int = 0;

  If(Application.application.width > obj.width) { }

            try {

  calculatedX = (Application.application.width - obj.width) / 2;

                 if (yPos < = 0) {}

  calculatedY = ((winHeight-objectHeight)/2-100) > 0? (winHeight-objectHeight) / 2 - 100:50;

  }

  else If(yPos < =(appHeight-winHeight)) {}

  calculatedY = (((winHeight-objectHeight)/2) + yPos-100) > 0? ((winHeight-objectHeight)/2) + yPos - 100:50;

  }

  else If(Posy >(appHeight-winHeight)) {}

  calculatedY = appHeight - objectHeight - (winHeight-objectHeight) / 2;

  }

  }

            catch (error) {}

  }

  }

  else {

  }

  obj.x = calculatedX;

  obj.y = calculatedY;

  }

  Used JavaScript functions are:

  function findScrollTop()
  {
  var ScrollTop = document.body.scrollTop;
  If (ScrollTop == 0)
  {
  If (window.pageYOffset)
  ScrollTop = window.pageYOffset;
  on the other
  ScrollTop = (document.body.parentElement)? document.body.parentElement.scrollTop: 0;
  }
  ScrollTop return;
  }

  function getWindowHeight()
  {
  var y = 0;
  If {(self.innerHeight)
  y = self.innerHeight;
  } Else if (document.documentElement & & document.documentElement.clientHeight) {}
  y = document.documentElement.clientHeight;
  } Else if (document.body) {}
  y = document.body.clientHeight;
  }
  Return y;
  }

  Found a solution for this. CallLater() appeared the problem in Safari. Once I deleted CallLater and directly called my function, the problem has been resolved.

• &lt; / html that appears at the bottom of page

  
  & lt; HTML appears at the bottom of my page, when I add text to the Page footer text i.e.
  
  Company Limited 2009. & copy; All rights reserved.
  
  After having investigated further, I discovered that if I remove the COPY symbol (& copy ;) & lt; / html is not displayed.)
  
  The problem is that it takes to "Company Limited 2009. & copy; All rights reserved. "appears at the bottom of all our web pages
  
  Someone at - it ideas how to solve this problem.
  
  Thanks in advance.

  Try to use this instead:

  ©
  

  See you soon

  Ben

  Published by: Munky on March 4, 2009 10:39

• How can I me display appears in location/size I prefer?

  Outlook displays at random locations on the screen.

  How can I get it to appear in the same place whenever it is open?

  Jim / *.

  Split- https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-can-i-get-display-to-appear-in-sizelocation/52647e05-e377-44e9-aeb8-ab066ec95c41

  It will open at the location it's last trick to, as long as there is place so that it fits the size and location.

• HTML display

  Hello
  
  Can someone recommend me a way how can I display a site html in my flex application.
  For example when I have a container of the bookmarks tree, I would open the site on a Panel on the INSIDE of my flex application.
  
  It could also be posible to use javascript and then opening the site referenced outside my flex application, but I think my preference goes to a panel of html in my flex application.
  
  Advice would be welcome.
  
  Best regards
  Raymond
  
  

  A Google search gives the following results:
  http://www.Google.com/search?q=Flex+HTML

  This gives the most popular way to do it:
  http://www.Deitte.com/archives/2006/08/finally_updated.htm

  Mike

• Yahoo is my home page, but this chrome://ntsd-c/content/newtab/newtab.html tab appears instead. How to I get rid of this

  my homepage is set correctly in firefox, but I can't do anything to prevent the opening first of all chrome://ntsd-c/content/newtab/newtab.html, and then I have to open the second yahoo tab

  Thank you

  Hello, please try refreshing firefox and see if that can solve the problem...

• Introductory statement; When the hit play button, I want the presenter display appears?

  I have Keynote 6.6.  I created my view presenter on how I want to get my presentation on a projector (not yet hooked).  I guess that when I'm ready to present, I hit the play button in the toolbar.  When I do, he'll just in playback mode.  I want to see the "presenter" display that shows my notes, etc., but I have not, it will just in this game mode.  When I, for example, press on repeat slide show, it works fine.  What I am doing wrong?  Would it because I have to be plugged into the projector or I'm doing something else wrong?  Thank you.

  (I'm on Mac 10.11 upgraded to Yosemite)

  with the projector connected;

  1. Disable mirroring in: System Preferences > displays
  2. Keynote preferences > slide show: Select to: enable presenter view

  Repeat slideshow displays the screen of the presenter to allow the in place the presenter tools

  When in the game, view a second (the projector) must be connected to enable the display of the screen of the presenter.

• Convert Hex Hex display to normal display appears no zeros

  Hi all

  I try to combine a Normal hexagonal display channel indicator

  To do this, I formatted the hexagon in a format where it looks like the hexagon starting again but can enter the normal display string

  for example.

  I start by 00040040

  When I try to put it in my Normal display string I get 40040.

  I added a VI with an explanation and an example - it will be much easier to understand if you have a look at that.

  Thanks for reading

  
  

• I optimize my xp sp3 with XPTune all of the default software setting disappeared and now old looking for display appear on the screen. I want that my failure to return

  Display

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers XP

  _____________________________________________________________

  you could also do a repair of XP instead of a full reinstalling installation

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  for any other question of XP

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• IR - code HTML display in the column PCT_GRAPH

  Database Oracle 11 g and oracle apex 4.2

  I created the form IR report. in the report of the IR, I have a column of type number percentage WHRATE name. I want to show the percentage displayed as bar in https://apex.mt-ag.com/pls/apex/f?p=145:8:0:NO:RP: & cs = 30A914467F826BB3DF61E79183C9F1007 last PCT_GRAPH in column mask.

  I have WHRATE interactive report column and I put number / date format = PCT_GRAPH:CFDEF0:144485:150.

  apply changes after when I run the report to the WHRATE column list below the code instead of the percentage of chart bar.

  < div style = "width: 150px;" height: 14px; background: #CFDEF0; border-top: 1px solid #aaaaaa; border-left: 1px solid #aaaaaa; border-bottom: 1px solid #ffffff; border-right: 1px solid #ffffff; "" > < img src="/i/1px_trans.gif" width = "30" alt = "30" height = "14" border = "0" style = "background: #144485;" "> < / div >

  kindly Guide.

  Thank you.

  870213 wrote:

  Please update your forum profile with a real handle instead of "870213.

  Database Oracle 11 g and oracle apex 4.2

  I created the form IR report. in the report of the IR, I have a column of type number percentage WHRATE name. I want to show the percentage displayed as bar in https://apex.mt-ag.com/pls/apex/f?p=145:8:0:NO:RP: & cs = 30A914467F826BB3DF61E79183C9F1007 last PCT_GRAPH in column mask.

  I have WHRATE interactive report column and I put number / date format = PCT_GRAPH:CFDEF0:144485:150.

  apply changes after when I run the report to the WHRATE column list below the code instead of the percentage of chart bar.

  The value of the column percentage display as value attribute Standard report column.

• html display problem

  Hello

  I built my first website and im having problems in downloading. the htp and the server works fine.

  I have the index to the level of general file ""site " and all other html in a folder inside the he called"models ". »

  when im downloading from my site index opens well but when im trying to push links to get the other computer html of won't do. It seems he's looking for the html code in the general "site" folder and not the folder "templates".

  How can direct these html templates folder?

  PS - when I tried to run with the dirrection Dreamweaver tool and upload my site it is cost to search in the templeas folder, but not on the site itself, but my d driver.

  Thank you very much in advance.

  assistance will be much appreciate.

  the site:

  www.sittonjewelry.com

  If your linked pages are in a separate file, then your links should point to this folder as part of the connection url, for example...

  a href = "EARRINGS_page1.html"

  should be

  a href = ' templates/EARRINGS_page1.html'

  based on what you just described.   Is there a reason for having them in separate folders?  You must use the same directory structure on the server that you used in the test in Dreamweaver.