Portege M400: Display appears on the side to the Port Replicator

Similar Questions

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• Portege R500 - configure the parser on the Port Replicator

  The system is Portege R500 with a port replicator Port MS Vista running. Port replicator has a Philips 19 "LCD monitor

  System has BEEN configured so that when the system was in the duplicator monitor 19 "inches would be active and system monitor is inactive.

  But, a few days before the following events occur, when the system is in the port replicator and its turned on screen (the one with the mobile progress indicator) Windows startup is displayed on the Port Replicator monitor, then the screen turns white and displays them on the screen on the monitor system, after entering the desktop on the monitor system.

  I live in a remote area, so I can't pop in the store of the local computer to ask for help.

  I would appreciate someone to give me some guidance as to where it configures the port replicator monitor configuration. I looked at the section Configuration screen Control Panel but it seems to be the performance of two monitors, it appears not to address the peculiarities of a laptop computer with a port replicator configuration

  Thank you

  Hello

  I have no Portege R500 but I ve used external monitor connected to my Tecra duplicator.
  Can you please tell me how you have configured previously?

  What is your external monitor set as primary monitor?

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Tecra A10 - poor display through the port replicator

  I have an error with one of my clients, they have 3 x Tecra A10 is bought in the last three months, the last time being last week.

  I get a very poor screen through the port replicator, lines running through the screen almost like the lines of scanning, or RF interference. It happens on all three laptop configurations.
  We have new Phillips 19 "wide and 22" widescreen, I also tried a HP 19 "wide where else in the company. also having the same problem. These monitors are working 100% if hooked up to a computer or DIRECTLY into the laptop A10, as soon as you plug them into the cradle we get lines through the screen.

  I'm learning to communicate with the provider in order to replace it, because I have three already do the same thing, I'm pretty sure that I will receive a fourth with the same error.

  Someone else has the same problem?
  According to me, this issue has been raised on another forum, but was not answered. Does anyone have a solution?

  Please can you tell us which port replicator you use and which port replicator port?
  BTW: you are an authorized service provider?

• No sound on the Port Replicator port II (Tecra S11 - 12M)

  Hello! Because today, I have no sound on my sound from the Port Replicator II (PA3680E-1PRP) plug to run my external speakers. Instead, the internal speakers are running. On the laptop itself, making works well, only the port replicator appears to be dead.

  It has worked well over 10 months now without any complaint. I've seen a few similar cases in forums but no answer that could help me. I didn't lie all the drivers again.

  I work with WIN7/64-bit Service Pack 1.

  Anyone know how to fix?

  Thank you, christophe

  Hello

  Recommend to check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56460

  * Milo_Tweenie wrote: *.

  + Did not know that the audio 3.5 mm output jack is actually run by a USB hub in the duplicator. +
  + Concluded that the multimedia USB Audio Device was not installed driver for the audio port. Click the button to update the driver, it has found the driver automatically and now I have sound. +

• Re: Tecra A10 - USB problem on the port replicator

  I have a Tecra A10 and sometimes, when I work with her, the devices USB stopped responding if they are connected to the port replicator.
  If I connect them to the laptop, they work fine.

  I tried to update the BIOS but now when I turn on the laptop it freezes when Toshiba red letters are displayed on the screen. I can work with the laptop properly deattached starting from port replicator.

  Have you tried to load the default settings in the BIOS after the update?

  If you have external devices connected to the laptop they remove and try again in the duplicator.
  Maybe you should also update your laptop chip set driver. You can find them on the Toshiba site.

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• Problems with an external monitor with the Port Replicator III and M100

  Hey all.

  I just returned from a trip where I took my laptop. Plugged into the Port Replicator port, started and everything was fine. Then after an hour or two, the monitor stopped receiving a signal. I repositioned the laptop and everything was good again. He then loses signal once again, and I was not able to get a signal via the port replicator since.

  The monitor works fine through the hole at the rear of the M100.

  I checked the pins on the Port Replicator port and portable, none folded and tried to clean any dust etc. Still no signal to the monitor.

  Someone has ideas of how to do to solve this problem?

  Jamo

  Hello

  The Toshiba 3 mobile extension is responsible for the good condition of the duplicator 3 market. Try to reinstall this utility and also check the page of the Toshiba driver for updates.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• X 301 has no sound when connected to the port replicator

  Hello

  We have a x 301 with a port replicator 45 k model 2777-cto 1610.

  We first had the problem with the blue screen and not SA of lenovo or IBM might help. I found the solution here.

  No, I have a new problem. When the port replicator is connected, there is no sound on the computer? Once the port replicator is unplugged, the sound works well?

  Any ideas or advice will be appreciated.

  Eugene

  When you connect to the rep of the port, the audio should be routed to the audio port on the default port rep, not your system. There should be a setting via icon taskbar for rep port driver that returns the audio to make of her.

• audio off when it is associated with the port replicator

  I use Windows XP with my Thinkpad T400 and I bought a Lenovo port replicator model k33415 with my computer.  I have a keyboard and a mouse attached to the Port Replicator port as a PDA sometimes.

  Whenever the port replicator is connected to the computer, the computer speakers do not work and I hear no audio.   When I restart the computer without the attached port replicator, the computer speakers are working fine.      I've tried everything!    Any ideas?

  Hello!  In fact, I fixed it on my own.   Under sound properties I adjusted the audio settings for 'Conexant HD', he made my default device, and under AUdio and then "Advanced", I needed to set speakers to computer speakers.  What I haven't done yet we see if this turns off audio when I unplug the duplicator... so I guess I need to change the default device.   You may not have the same problem, but in any case, good luck!

• Portege M400 - how to remove the condensation of water?

  I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

  so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

  the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

  but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

  hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

  * so, how can I remove the condensation of water? *

  * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

  Hello olekike

  Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
  View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

  I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.