HTML post Message

Similar Questions

• Post messages of OSB to ActiveMQ

  Hello!

  I would like to know how to post messages to ActiveMQ OSB, what steps should I take? Is it necessary to create a JMS system Module?

  Thank you in advance.

  Best regards

  Sandy.

  Hi SandyMx,

  To connect to Active MQ, you must active mq added to weblogic server classpath libraries, and then you can create a foreign JMS server in weblogic.

  Within the foreign JNDi server, you can mention the connection factory and the remote queue that you want to connect. You can then use the jms transport in business and was able to connect in Active MQ as a local queue (Ex: jms://localhost:7011 // ). The links below would be very useful for you.

  http://Amadei.com.br/blog/index.php/connecting-WebLogic-and-ActiveMQ

  http://oraclefusionmiddlewaremyfewcents.blogspot.co.UK/2015/01/ActiveMQ-setup-in-WebLogic-for-OSB.html

  It will be useful.

• 3000 N100, how to get the POST messages and text/VGA mode?

  Story is this: my sister broke its N100 and I removed the lid with LCD. It worked fine until she blew his Windows. Now I need to reinstall, but it is almost impossible in 'blind' mode So, is it possible to POST messages and installation of Windows for display on screen?

  Never mind, I changed the settings of the BIOS using the bios images found on the internet and it worked.

  Press F1 to enter BIOS.

  The right key sequence was ENTERED (since hit F1 permanently open BIOS help screen), right, down, F6, F10, ENTER.

• CTRL + Enter Does not post message on Basecamp

  CTRL + Enter sends a message in GMail and many apps to use as shortcut 'send '. Works for me on GMail.

  But on Basecamp.com, it does not work when you post a message on Basecamp. Works well on other browsers. When I contacted their support, they said that FF does not allow for customization of this shortcut.

  What can I do to get this working?

  As GMail and many other sites demonstrate, it is not true. We can't really do anything, though, as they need to implement support for this shortcut in their application. If possible, you should follow with their support and give examples of applications where it works.

• T460s delay start-up and BIOS error message ' error sending end post message me HECI disabled»

  Hi all

  I just bought T460s in the website of sale at auction...

  After you install windows, I found several problem:.

  1 I can't update my bios

  2 the machine some time having the intermittent fan noise and restart by itself.

  3 I can't seem to update intel management engine firmaware

  So, I decided to return all the bios to factory setting...

  so my laptop is fine, but sometimes the laptop take a few momet to start and send the message:

  "error sending me end of message post HECI disabled.

  di decides to put my laptop to allow the lenovo Service Center:

  the technician suggest my Planar is a problem...

  but when I checked my machine detec system my warranty has expired...

  any suggestion is appreciated...

  This my thinkpad 3, my previus SL400 and T420 machine works great

  Thank you.

  If you can get into the BIOS, try to disable AMT (under the Security menu)

• Can't post message on the Windows Live Mail Portal

  I tried to post a message about a problem with Windows Live Mail on messaging portal.  Whenever I click the button submit my message I get an error saying "There was an error while processing your request".

  The procedure I tried is as follows:

  1. Select the email portal.
  2. click on 'ask a question '.
  3. click on "Continue" by selecting the "Mail".
  4. click on "I can't open Windows Live Mail.
  5. I get a message saying "There was an error while processing your request".

  Alternatively, if I do the following:

  1. Select the email portal.
  2. click on 'ask a question '.
  3. click on "Continue" by selecting the "Mail".
  4. click on "other Windows Live Mail Issues.
  5. click on "Continue" to my question.
  6 fill in the fields on the screen 'Ask your question' and click on 'submit '.
  7. I get a message saying "There was an error while processing your request".

  I tried this several times in recent days and get the same result every time.

  Jim

  I hope you look at the responses from the support staff to "cannot display" question to WLSC.  It's going to be a long term job, I think. The iPad experience was conducted using the same Internet connection or another?

  I'm sorry, it will take an expert in demystifying the WLMail journal to address the problem of calendar. It is quite common, although I suspect that the message "corrupt data" covers a multitude of different errors. They should have enough cases to be able to say what the problem is, but they are so starved of resources that I doubt that anyone has attended the.

  Noel

• How do I post messages on a Web site

  Hey everybody,

  I was wondering if there is a way to display messages on the Web site using an application I created. I know it has to do with the API - but I was wondering how would the structure of code for such a task. I have a text input and a button that should display the message in text on a Web site. Is there anyway I can make the app automatically post to a page if I provide a URL?

  Thanks in advance!

  Hey Jimmy,

  This code should you get. He gets a user to input a single textfield and submit its as a POST to a Web page that you provide as a URLRequest and then set up the charger with data and submit it and once it receives a confirmation email that the data has been submitted it will warn you. his code:

  package {
      import flash.display.Sprite;
      import flash.events.Event;
      import flash.events.MouseEvent;
      import flash.net.URLLoader;
      import flash.net.URLRequest;
      import flash.net.URLRequestMethod;
      import flash.net.URLVariables;
      import flash.net.navigateToURL;
      import flash.text.TextFieldAutoSize;
  
      import qnx.ui.buttons.LabelButton;
      import qnx.ui.text.Label;
      import qnx.ui.text.TextInput;
  
      [SWF(width="1024",height="600",backgroundColor="#CCCCCC",frameRate="30")]
      public class RandomTests extends Sprite
      {
          private var enterText:TextInput;
          private var enterBtn:LabelButton;
          private var statusText:Label;
          private var loader:URLLoader;
  
          public function RandomTests()
          {
              enterText = new TextInput();
              enterText.setSize(400, 50);
  
              addChild(enterText);
  
              enterBtn = new LabelButton();
              enterBtn.label = "Click me to post";
              enterBtn.setPosition(410,0);
              enterBtn.setSize(150,50);
              enterBtn.addEventListener(MouseEvent.CLICK, postData);
  
              addChild(enterBtn);
  
              statusText = new Label();
              statusText.autoSize = TextFieldAutoSize.LEFT;
              statusText.setPosition(0,100);
              statusText.format.color = 0xFF0000;
  
              addChild(statusText);
          }
          public function postData(e:MouseEvent):void
          {
              /*
               * url:String will store the address to your page online
              */
              var url:String = "http://www.rabcore.com/workshop/receivePost.php";
              /*
               * request:URLRequest is what you send with all your variables
               * and data to using the loader class
              */
              var request:URLRequest = new URLRequest(url);
              /*
               * variables:URLVariables will store all the variables you
               * want to submit to the webserver
              */
              var variables:URLVariables = new URLVariables();
              /*
               * for every variable you want to send use the
               * variables.[variable_name] = "string" format
              */
              variables.showMeData = enterText.text;
              /*
               * add the variables to the request
              */
              request.data = variables;
              /*
               * set the method to POST if you are submitting a form
               * type that does not have a URL query string
               * set the GET if you want the variables to show up
               * up as a url query string (e.g. page.php?showMeData=something)
              */
              request.method = URLRequestMethod.POST;
  
              /*
               * set up the URLLoader object that will send the request to
               * the server
              */
              loader = new URLLoader();
              /*
               * set up a listener to check when the request has been sent and
               * received by the webserver using the Event.COMPLETE event
              */
              loader.addEventListener(Event.COMPLETE, updateStatus);
              /*
               * finally send the request to the webserver
              */
              loader.load(request);
          }
          public function updateStatus(e:Event):void
          {
              statusText.text = "Data has been submitted successfully.";
              /*
               * remove listeners when done
              */
              loader.removeEventListener(Event.COMPLETE, updateStatus);
          }
      }
  }
  

  Let me know if you need any explanation. Good luck!

  Edit: Comments added to the source code

• BlackBerry Smartphones restored, but no posted Messages

  I have a Curve 9360 with OS 7.1. I did a restore of message from a full backup. 529 posts restore was completed successfully. But I opened the mailbox appeared empty, withou a single message. Through the Blackberry Desktop Software, in the option "Erase data from device", confirmed that the restoration was made because the aircraft had 529 messages. But no one is shown. I appreciate the help.

  Hello and welcome to the community!

  I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... ( Please wait for this before moving on to the next step) :

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  See if that allows the messages now.

  Good luck!

• Invalid HTML tag message

  I want to register a second CHM Help me. I use RoboHelp 6. I click the icon 'new topic merged' and go to an another generated chm.
  
  When I generate and then get an overview of the CHM, I get the following message:
  The file project]\master.chm::/master.hhc mk:@MSITStore:C:\[path
  an invalid HTML tag.
  
  I have merged CHMS successfully in the past and have other projects with merged CHMS causing no worries me. I tried for this search on the Internet, but the solutions that I found do not have help.
  
  Any in put would be greatly appreciated.
  
  Debbie Sarig

  I've also had this happen when the merged TOC object is at the bottom of the table of contents and not inside a book TOC.

• Post messages no longer works

  I can no longer send messages to anyone on Skype.

  He started last night out of the blue! I was talking with people and all of a sudden when I hit enter or the button send my sidebar scrolls just a little, and when I scroll down there is no message to me here. I've never had Skype Act so weird on me before. I have the auto update on and run the latest version of Skype. My laptop is a brand new msi and OS is windows 8.

  HELP Please x_x

  Good so I just found out why he acts this way. It displays messages in YESTERDAY Skype messages. So it's basically to send my messages in the past the present instead of. I don't know how to solve this problem.

  Have you checked the clock of your computer? Was wrong in the past?

• Pavilion a705w: 2 GB, 80 GB, Windows XP Pro SP3. POST message on "disks fail (40).

  Howdy, y ' All,.

  Pavilion a705w a friend shows "diskettes (40) failed" message when starting. The BIOS is the last of this mobo: 3.26. There is no floppy disk in the system. I changed the BIOS to disable your disks, but this change seems to be lost. It was not a message on a CMOS battery, but could this be the problem?

  Once the system starts, there is no problem. FWIW, the processor is an Intel Celeron D 340 @2. 93 GHz.

  Thanks for your suggestions.

  A. in NorCal.

  Hello

  The typical lifetime of a CMOS battery is 3 to 5 years.  It's a $4 item.  Your PC is a 2008 model.

  Look here for the location of the CMOS battery. Replacement procedure is here.

• Post messages for password required

  In the last few days I've been to repeated messages titled 'Mail password required' popup that appears to relate to a POP account I have with BT Internet. If I go on Internet accounts and click this account a dialog asking you for the password of e-mail. When I write I get the message "Unable to verify the account name or password". Despite all this malarkey mail account works fine via Mail 9.1 and also via the webmail BT site - using the same password.

  Life was easy before the arrival of the El Capitan: since then, I've had problems with Mail, it is just the latest.

  Any ideas?

  Thank you.

  This is the dialog box:

  

• Outlook Express keeps trying to compact my messages. I'm unable to post messages and get the Error 0x800ccc0d code and I can not remove outlook Express

  Outlook Express keeps trying to shoot my messages several times per day.
  I'm unable to view messages in Outlook Express and get the code of Error 0x800ccc0d
  I'm unable to remove Outlook Express from my computer, I did not need it that I use Windows live mail.
  Any ideas on how to stop this nuisance.

  Windows Search is installed?

  You must tell Windows Search to stop indexing OE.

  In the control panel. Indexing Options. Change. Clear the check box for Outlook Express.

• OfficeJet Pro 8600 will not feed photo paper. post 'message of paper '.

  I went through all the troubleshooting steps. Clean the roller, etc. the printer will be fine plain paper feeding, but not the photo paper. I use new paper, shiny and Matt brand HP. Suggestions? I n ' t had this printer a year yet, but it's out of warranty. I use Picassa with Windows 7

  Hello

  I see that you have a problem with the printer print on photo paper. I would first do a hard reset with the printer.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Wait for 30 seconds

  Then plug the power cord into the printer, and then on the wall (make sure that you plug into the wall and not a surge protector)

  If this does not resolve the problem, I suggest installing a replacement driver. Sometimes the default driver does not trigger the sensors to pick up different than the 8.5x11 paper size.

  You can follow this thread Shane and install the drivers from 990c. 

   

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Let me know the results.

  Thank you!

• After uninstall and disconnect a photosmart printer HP 7510 from my system, a nuisance poster message whenever the system is booted.

  WIN 7 Home Premium system

  Gateway DX4860-UB32P computer

  8 GB memory

  After uninstalling and removing a 7510 HP printer wireless system, the following message appears each time you start upward.

  RUN DLLS

  There was a problem starting C:\Program HP HP Photosmart 7510 series\bin\HPStatusBL.DLL

  I removed all references to the 7510 HP computer (start msconfig etc.) have sought the dll referenced, reinstalled and uninstalled again but cannot get rid of this message. The computer works fine and connects to two other printers (all wireless) without problem.

  HP spent two hours working on the system and are unable to find the cause. It must relate to something in the Windows system, they argue.

  Can anyone suggest how this irritating start can be removed?

  Glad I could help! Yep, it's a very nice tool. You might want to mark this as answer in case someone else has the same problem.