HTML5, text animation, swf object does not.  Know when it's available? (updated)

Similar Questions

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Windows Vista Basic - display, icon & text animated look and does not fit screen

  original title: Windows Vista Basic

  After a recent update of my screen, icons, text and little else seems animated and does not have the screen on my laptop. Advice please? I tried to change my screen resolution, but it will only go all the way to the left or all the way to the right.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• OLE object does not appear when you open a. ODT file.

  I often get files from a source that uses an open office program. I am able to open the. ODT file, but embedded OLE object appears as text. The object is a logo, so I'm not all that concerned however, I wonder if there is a way to convert the file so that the OLE object appear to printing purposes. I downloaded an app named "Document converter" on the App Store and I am able to open .odt file in MS Word for Mac but the OLE object still does not appear. Ideas for a job here? As always, thanks in advance for your help.

  .ODT is a file "Open Document formaT". Word 2010 for Windows supports this format, but their infinite stupidity do not justify this in Word for Mac same word in 2016 of Office for Mac does not support this format. OLE stands for Object Linking and Embedding and was a way to incorporate one document inside another and I believe was originally designed by Microsoft. A typical example where it will be will work not on a Mac is when a Visio or project document is embedded in a Word document, because even if obviously a Mac can read Microsoft Word files it can read Microsoft Visio or Project files. In theory embedded Excel, Word or file of standard chart for example, jpg, png, etc. must be displayed on a Mac.

  I'm not aware of a way to determine what might be the embedded object.

  You could try various other programs that support this format e.g. OpenOffice and Google Docs and see if they do a better job to convert.

• Text to outlines - but does not smooth when recording in jpg or png format

  Hello

  Just started with Illustrator and while it is easy to change the text to text outline (making vector), when it comes to the economy as long as .jpg or .png, I find that there looks like pixels. Can someone tell me why it is not stay as a vector? Please see the attached picture.

  When you perform the same action for jpg or png with a graphic, everything is perfectly smooth, so why this does not work the same?

  Can anyone help please?

  I checked with a lot of videos and help files, but cannot find an answer.

  Thank you very much

  Confused user...

  I've used other programs that convert text to vectors...

  A small correction of terminology:

  A "vector" is a direction. Don't refer to a path like "vector" or on a plurality of paths in the form of "vectors". Paths (more precisely, cubic Bezier curves) are what you are drawing with Illustrator.

  Type > order vectorize not "convert to vectors." The glyphs in fonts on your system already include traced. That is why they can be set on any size and not become jagged with zoom. But they reside at the level of the system and are "called" by the programs in which you use them. Type > order vectorize retrieves just the traces which are already included in the police and converts them (if any, as with quadratic Bezier curves in TrueType) to native Illustrator of traces of Bézier used cubic. Subsequently, they no longer alive text called for a font file. they are just normal paths in the Illustrator file.

  So, the goal to convert text into paths (as some programs call it) is not not to transform the glyphs for text in traces. they already are. The goal is actually "copy" the traces that are contained in the police and the plop on the page.

  JET

• Content of the swf flash does not work when uploaded

  Hello world. I'm having a problem. When I download some website that has integrated flash content in Dreamweaver It does not appear in my browser. It does not appear in Firefox 3, but some of the Flash appears in Internet Explorer. I have downloaded the necessary files with the correct underlining & hyphens in it but still does not appear. I also downloaded the js file in a separate scripts folder & in the same location as the file htm on the server. But nothing works. The biggest problem I face is that native built-in Dreamweaver Flash Slide show viewer reveals at all in any browser once downloaded to my respective server. It appears, however, when I saw locally. I tried to download every possible Firefox flash plugin I can think & nothing. I tried to post my code on this website http://validator.w3.org/ but I do not understand what I have to do to change. The site is this place http://www.petfilms.us/Applications.htm. It's very frustrating for me. I'm banging my head against the wall, trying to figure out this thing but no luck however. PLEASE HELP SOMEONE! Thank you.

  I decided to recreate the slideshow in Flash from scratch instead of recreate my entire webpage from scratch. It solved my problem in like 2 seconds.

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• Resource object does not appear when a user provisioning

  A simple task, but I am not able to solve this problem.
  I have a dummy resource that I created for some tests. However, I am not able to see this resource when trying to configure a user for this resource.
  Any ideas?
  
  FYI:. I checked SelfService allow, allow all, Alow Multiple and checkboxes Autolaunch
  
  Thank you
  -Mahi

  Check your email.

  After asking a resource, check the details of approval in the menu drop down to the bottom..., you will see the task manager approval, approve it.

  Thank you
  Suren

• my wireless does not work when I download the update for Windows Vista (KB2753842) security

  After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

  the fact. When I used a LAN cable I internet connection.
  When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
  The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
  Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
  Thank you.
  Roy

  Thank you very much for your answer.

  I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

  Kind regards

  Roy.

  Hi royhorrobin,

  Please report the problem to the Microsoft Community Forum.

  We will help you solve the problem.

   

  1. What is the brand and model of the computer?

  2. do you get an error message?

   

   

  We would like to tell you that this is a critical update...

  Find information here:

  http://support.Microsoft.com/kb/2753842

  Here are some steps that you can follow:

   

  Method 1:

  Step 1: Restore the system to the United Nations-isntall the software update.

  Refer

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  Step 2: Put the computer to boot, with warning...

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

   

  Step 3: Download and install the update manually to the clean boot.

  Method 2:

  Try to update the Wireless driver and check to see if the same problem happens.

  a. click on start
  b. right click on computer
  c. click Properties
  d. click on Device Manager on the left hand side

  e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
  f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   

  
  Method 3:
  Also, try the steps from the link below:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
   
  Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• For the release of HTML5 text animation

  You can manually animate text for output to iPad/HTML5? Animate, I hear by moving from left to right, up/down, etc.

  Hi Steverb2,

  Welcome to the Adobe Forums.

  Although most of the animation does not work when HTML 5 is published.

  However can you please try the effect option Add and choose the "Path" option, and then choose 'Left-right easy' as shown in the image below:

  Then publish them out of HTML5 and see if works.

  

  Thank you

  Loveesh

• SWF does not appear when you go back to the tab browser

  I had a report of strange bug on a web application that we develop.

  The SWF looks fine for the most part, but it's the user has several tabs open the browser moves to a different tab and then returned to the tab with the swf, swf file does not appear until the mouse scrolls on the swf.

  At first glance it looks like the swf is not redrawn until the user with her intereacts (we do a fair amount of mosue on election).  There she crept to save memory, the browser stops displaying the image and not redeisplay not until we explicitly have to redraw the scene.

  Has anyone meet a similar situyation?  I don't know where to start with this.

  Some potentially relevant aspects of the swf file:

  Most of the objects on the stage have chachAsBitmap set to true and that we apply a mask degraded to most of the scene, so there is a good amount of ongoing treatment and I know thishas caused a few other quirks to redraw.
  The pace is on a very slow 4 frames per second and film is flown by a timmer.

  All the tracks would be appreciated.

  The tester reported it was using Chrome 9.0.597.107 and Flash player 11.3.300.26

  your pace should be significantly with fp 11.2 + opening another tab.  the pace should return to normal when your new swf focus.

  You can use throttleevent from the scene to detect these events.

• I use Adobe Acrobat Pro and when I click on save as PDF... PDF reader enable adding text in the Documents does not appear. Why?

  Can you please tell me why?

  With my Adobe Acrobat Pro, when I click on save as PDF... PDF reader enable adding text in the Documents does not appear.

  Thank you

  Elina Mackay

  Adobe change Acrobat a lot between releases. Make sure you follow instructions to the same version you have.

  If this looks OK, let us know the exact version you have (help > about Acrobat Pro).

• ORA-12545: Connect failed because target host or object does not exist

  Hi all

  I am not able to connect database remotely. I have two servers with the name U.S. and localhost. Here are my coordinates tns:

  Details of the host server we:

  [oracle@US admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  PROD =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  PROD_STBY =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  
  

  [oracle@US admin] $ more sysconfig

  Networking = yes

  NETWORKING_IPV6 = yes

  HOSTNAME = US.localdomain

  
  

  [oracle@US admin] $ more/etc/hosts

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  : US.localdomain6 1 U.S.

  Remote Ping US server location:

  [oracle@US admin] $ ping 192.168.188.131

  PING 192.168.188.131 (192.168.188.131) 56 (84) bytes of data.

  64 bytes from 192.168.188.131: icmp_seq = 1 ttl = 64 time = 0,662 ms

  64 bytes from 192.168.188.131: icmp_seq = 2 ttl = 64 time = 0,558 ms

  64 bytes from 192.168.188.131: icmp_seq = 3 ttl = 64 time = 0,566 ms

  64 bytes from 192.168.188.131: icmp_seq = 4 ttl = 64 time = 0,603 ms

  64 bytes from 192.168.188.131: icmp_seq = 5 ttl = 64 time = 0.575 ms

  ^ C

  -192.168.188.131 - ping statistics

  5 packets transmitted, 5 received, 0% packet loss, time 4002ms

  RTT min/avg/max/leg = 0.558/0.592/0.662/0.048 ms

  Details of the server remote localhost:

  [oracle@localhost admin] $ more tnsnames.ora

  PROD =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  PROD_STBY =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  
  

  [oracle@localhost admin] $ cat/etc/hosts

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  : 1 localhost6.localdomain6 localhost6

  
  

  [oracle@localhost admin] $ cat sysconfig

  Networking = yes

  NETWORKING_IPV6 = yes

  HOSTNAME = localhost.localdomain

  [oracle@localhost admin] $ listener.ora more

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = prod. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = prod)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@localhost admin] $ lsnrctl status

  
  

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2014 16:49:36

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date February 4, 2014 16:42:09

  Uptime 0 days 0 h 7 min 26 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  Summary of services...

  Service "prod. The WORLD' has 1 instance (s).

  Instance "prod", status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  Location of ping to the server hosting remote localhost:

  [oracle@localhost admin] $ ping 192.168.188.130

  PING 192.168.188.130 (192.168.188.130) 56 (84) bytes of data.

  64 bytes from 192.168.188.130: icmp_seq = 1 ttl = 64 time = 1.57 ms

  64 bytes from 192.168.188.130: icmp_seq = 2 ttl = 64 time = 0,223 ms

  64 bytes from 192.168.188.130: icmp_seq = 3 ttl = 64 time = 0,577 ms

  64 bytes from 192.168.188.130: icmp_seq = 4 ttl = 64 time = 0,571 ms

  64 bytes from 192.168.188.130: icmp_seq = 5 ttl = 64 time = 0,568 ms

  ^ C

  -192.168.188.130 - ping statistics

  5 packets transmitted, 5 received, 0% packet loss, time 4006ms

  RTT min/avg/max/leg = 0.223/0.703/1.578/0.458 ms

  Connection database target mode ensures via RMAN:

  [oracle@localhost admin] $ rman target sys/oracle_4U@PROD auxiliary sys/oracle_4U@PROD_STBY

  
  

  Recovery Manager: release 11.2.0.1.0 - Production on Tue Feb 4 16:56:45 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00554: initialization of the package manager internal collection failed

  RMAN-04005: target database error:

  ORA-12545: Connect failed because target host or object does not exist

  Please let me know the cause of this error and it please help me how can I solve it.

  Kind regards

  Michel

  OK, so you have a software firewall (IPTables) running.  By default, it will not be configured to accept connections on port 1521.  You have two options...

  (1) disable the firewall completely.  Run these commands to do this...

  stop /etc/init.d/iptables

  chkconfig iptables off

  The first command stops the service.  The second command prevents revived at every restart of the OS.

  (2) add an exception to the firewall for port 1521.  I'm not a Linux expert, but it should be something like this...

  Change the configuration of IPTables with vi...

  VI/etc/sysconfig/iptables

  Add a new rule as follows...

  -A of ENTRY m state - state NEW-m tcp tcp - dport 1521-j ACCEPT Pei

  Save and close, and then restart the IPTables service...

  /etc/init.d/iptables restart

  NOTE: you must always change the name of this server to something other than "localhost".

• An embedded MP4 does not play when published as swf.

  An embedded MP4 does not play when published as swf.  The PlayBar is where. The swf embedded on the page works OK. I downloaded all the files generated to the Web site. Any ideas?

  I have not used the program for a while, so I'm a little rusty and I just know Captivate 8, so I hope I'm just something stupid. Oh yes, when I first publish and choose to view the project, he plays. If something must be different when it's moving online?

  And here is the link. I'm probably going to replace the voice to mine. My husband says that he looks like Siri and it really bugs. Mine is not great, but he assures me sound better than automated.

  http://susancvineyard.com/nav/portfolio/portfolio.swf

  Thanks for any help.

  Susan

  Post edited by: Susan Vineyard

  Make sure your video file is all characters lowercase and without spaces or punctuation characters.

  Check that your site administrator has set the video as a type of authorized file mime type.

  Link to the file that Captivate HTM publishes and not to the SWF that you did in the above link.

  Make sure that all THE published files have been downloaded successfully to the web site, including the video file.

• Object does not support the appliedparagraphStyle

  I use this notation on my script but I have this problem:

  in the first case (appliedCharacterStyle), my script works well;

  in the second case (appliedparagraphStyle) ID returns me an error:

  JavaScript 55 error

  Object does not support the appliedparagraphStyle

  Note that the grep finder back me the occorrence good, is just in the app.changeGrepPreferences.appliedparagraphStyle error.

  Can someone help me?

  ThnX a lot

  app.findGrepPreferences.findWhat = "<(.+?)". > ';

  var myFoundItems = app.activeDocument.findGrep ();

  var myCounter = myFoundItems.length - 1

  myTotal = myCounter + 1;

  Alert ("occorrenze" + myTotal);

  app.changeGrepPreferences.changeTo = "$1";

  app.changeGrepPreferences.appliedCharacterStyle = myDocument.characterStyles.item ("text");

  myDocument.changeGrep ();

  
  

  app.findGrepPreferences.findWhat = "£(.+?)". £";

  var myFoundItems = app.activeDocument.findGrep ();

  var myCounter = myFoundItems.length - 1

  myTotal = myCounter + 1;

  Alert ("occorrenze" + myTotal);

  app.changeGrepPreferences.changeTo = ' $1 ~ b ";

  app.changeGrepPreferences.appliedparagraphStyle = myDocument.paragraphStyles.item ("headR");

  myDocument.changeGrep ();

  JavaScript is case-sensitive, you must use appliedParagraphStyle with a capital P in the paragraph.