http.conf / dbc file

Similar Questions

• I need a sample DBC file entry

  Gurus,
  
  I had to restore my laptop and had saved all my project files except for the file *.dbc for database connections. Can someone please provide me with a full of dbc entry so that I can use as a template for my database. I did a search and could not find a good sample.
  
  I will reward you a correct answer.
  
  Thank you.

  See the link for 11i and R12 times below.

  http://techieanoop.blogspot.com/2010/09/how-to-find-DBC-file.html

  Thank you
  Anoop

• Daabase (.dbc) file using GetChannelNamesByID.vi CAN access problem

  Hello

  I use PCI CAN / 2 series2 map to read the sensor data. In my labview code I m using FrameToChannel API conversion to convert data of frame in real values, using a .dbc file. My software includes the data logger and the visualization of data from the sensors. I need to run this software contineously for 30 days and to monitor and record the data from the sensor.

  My problem is that the GetChannelNamesByID.vi is not working properly. My works of fine data logger (rading and record sensor data) but the visualization of sensor data real using the conversion FrameToChannel library stops sometimes. My software cannot read the channels from the database file. It happens randomly, for example after 12 hours.  I have to stop the software and run it again to make it work very well.

  Can someone me the reason and the solution for this?

  Thanks in advance.

  must be something like (untested) VI. att, lert me know if it works

• DBC file

  Hi all

  EBS R12.2.4

  RHEL 6

  One of the application developer where the dbc in our level apps file.

  Never heard of this file before

  Do you know what is the purpose of this file?

  Can you give me link and notes on how to install it?

  Thank you very much

  JC

  Location of the DBC files is represented by the parameter $FND_SECURE.

  It would be $INST_TOP/appl/fnd/12.0.0/secure

  So the dbc file would be there in the FIRST two, Patch and run

  concerning

  Pravin

• OA Framework DBC file

  Hello world

  I'm new to the framework of OSTEOARTHRITIS and wanted to install it. I searched on the net until I found a tutorial on how to install the required batch of link Meta

  To Extend First-Run Standard OA Framework pages of jDeveloper,

  In coming to the dbc file, I didn't know how to get this file . in the tutorials, I found the following:

  $FND_SECURE directory and search for the latest .dbc file

  
  

  but I could not identify what is $FND_SECURE, any help please?
  

  Thank you

  I found the solution, I need Application Oracle 11 g or above, which contains the files dbc......

• Where to place the DBC file in jdeveloper 10g

  Where to place the DBC file in jdeveloper 10g...
  
  I do not see any folder of dbc files
  
  Published by: Rashmi Gupta on November 23, 2011 02:26

  Hello

  This Jdeveloper won't work for the development of the ofa and personalization, you must download a Jdeveloper separated by this requirement, so please read the note I mentioned in the previous quote in metalink and to download the compatible Version of Jdeveloper, depending on the version of your application in which oracle you make customization or development. The note will have an adjacent link to the version from here, you can easily download the Jdeveloper, it will be around 600 MB in size.
  If you can share your exact version apps, we can tell you the correct version of Jdeveloper, but reading that not in metalink will be useful for you.

  Thank you
  Pratap

• Need .dbc files

  Hello
  I'm learning the OFA, and I do not have access to the instance that I'm just trying to learn on my own.
  
  I got stuck to the top when configuring Jdeveloper. He asks me the .dbc file that I can get from an instance.
  
  Is it possible that I can get the .dbc files, or what anyone here can provide me with a?
  
  
  Thank you

  It is AOLJ TEST.

  You can get information

  Diagnosing and tuning Pool JDBC AOL/J in Oracle e-Business Suite 11i (Metalink Note 278868.1)

  11i - AOL/J installation errors, Test check out parameters [216389.1 ID] DBC

  The Apps schema name: for example, apps
  Apps Schema password: example of apps (password apps)
  Oracle SID: e.g. mydb (name of your database)
  Hostname: e.g. myhost (your database hostname)
  Port number: e.g. 1521

  Once you enter the valid user name and password with the settings above, he login for the new screen and then click the Diagnostic Tests AOL/J, later it will pop up a screen more, you can marine as below.

  DBC file name: ofmsdev
  The Apps schema name: applications
  Database: ofmsdev

  --------------------------------------------------------------------------------

  Connection test
  DBC file you want

  If you want clear, drop your email id, I will post you screenshots.

• Re-create the .dbc files

  Hi all
  
  my system:
  12.1.1 ebsr12
  DB; 11.1.0.7
  OS: oulx64
  
  Please tell us how to re - create. DBC FILE
  the problem now: I can connect to applTier using sqlplus with user name apps/password"."
  but when booting, I got an error
  $ adstpall.sh apps/xxxxx
  
  You run adstpall.sh version 120.10
  
  
  adstpall.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong.
  
  USE: adstpall.sh < appsusername/appspassword >
  
  
  adstpall.sh: leave with the State 1
  
  
  Check the file TEST.dbc and he only generic information like below
  
  
  # $Header: 120.0 template.dbc 2005/05/07 16:45:30 appldev ship $
  # TEMPLATE.dbc
  # Model database configuration file.
  #
  # Create a copy of this file for each database instance this
  # Server applications will connect. Each file must have the name
  .DBC # < database_instance_name >
  # and be located in this directory ($FND_TOP/secure).
  # Edit each of the settings below, to suitable values for
  # the database instance. Do not change the syntax.
  #
  # This file can be generated using the AdminAppServer tool.
  # This is a java utility that can be run from the command line.
  # The instructions for using this tool are documented in Applications
  # Manual Sysadmin.
  
  #
  # TWO_TASK
  # SQL * Net database name.
  #
  TWO_TASK = database
  
  #
  
  
  Thanks in advance

  Hello

  You can run the adgendbc.sh script to recreate the DBC files - see (troubleshooting connection [178437.1 ID]) for more details.

  However, I would suggest you run AutoConfig and it should recreate the DBC files for you. If you get errors when running AutoConfig please post the error here.

  Thank you
  Hussein

• Error DBC file when the PG.xml runing in jdeveloper

  Hello
  
  (1) I installed Oracle database 10 g on my local computer to the location C:\oraclexe
  (2) now, I installed Jdev 10 G on my local computer to the location C:\Jdev10gOAF
  (3) I put the variable env JDEV_USER_HOME = C:\Jdev10gOAF\jdevhome\jdev
  (4) now, I want to start by what OFA present tutorials in my Jdev location C:\Jdev10gOAF\jdevhome\jdev\myprojects
  (5) I open the toolbox.jws file in Jdev and he charged all projects ExtendLabSolutions.jpr, LabSolutions.jpr, LabSolutions.jpr, Tutorial.jpr
  
  (6) now problem here when I try to run the HelloWorldPG.xml
  Jdev gives the error:
  "Field Filename DBC in the execution of connection is not specified. To run the OAF, you must specify a DBC file name. »
  (7) I know to give the name of the dbc file in the operation of the project in Jdev options, but this is the place where can I obtain the DBC file for the Oracle database that I installed locally on my system, as mentioned in the other 1.
  
  Any help on the Jdev configuration.
  
  
  Thank you

  Hello

  The DBC files under ($FND_TOP/secure or $FND_SECURE) directory.

  Kind regards
  Hussein

• SCIPT updated ESX (esx.conf) local file on all hosts

  http://communities.VMware.com/thread/199361

  The thread above works well for pulling all the esx hosts log files.

  I have a situtaion where I need to update all the ESX. CONF file on about 50 hosts two clusters...

  Again, I used the plink command, but this time I used the m parameter to pass the sudo commands.

  This is the script I came up with

  Note that the script takes all ESX hosts in a specific data center, but this can easily be changed.

  Also note that if the DRS is not set to "auto", you must boot the vMotions yourself from the VIC.

  The temporary file that I use to pass the command sudo for ESX server can be located somewhere else of course.

  Get-Datacenter  | Get-VMHost | %{
  # Place host in maintenance mode
    $_ | Set-VMHost -State Maintenance
  
  # Execute the esxcfg-module command
    $User = 
    $Pswd = 
    $Computer = $_.Name
    $plink = "D:\UserData\Tools\Putty\plink.exe"
    $cmd1 = 'sudo -u root /usr/sbin/esxcfg-module -s "qlink_down_timeout=30 qlport_down_retry=255 qlogin_retry_count=255 ql2maxqdepth=32" qla2300_707'
    $filename = "temp.txt"
    $cmd1 | Set-Content $filename
    $plinkoptions = " -v -pw $Pswd -m $filename"
    $command = $plink + " " + $plinkoptions + " " + $User + "@" + $computer
    Invoke-Expression -command $command 
  
  # Reboot the server
    $taskMoRef = ($_ | Get-View).ShutdownHost_Task($true)
    $task = Get-View $taskMoRef
    while ($task.Info.State -eq "running" -or $task.Info.State -eq "queued") {$task = Get-View $taskMoRef}
  
  # Place host in connected mode
    $_ | Set-VMHost -State Connected
  }
  

• How to configure jdeveloper 11 with the .dbc files?

  Hi all
  
  I am a new bie here. 4 jdeveloper 10, I can configure files .dbc to the setting of the project, while 4 jdeveloper 11, it's totally different. I can't find any place to set it up. How to configure the .dbc in jdeveloper 11?
  
  Kind regards
  Chelsea

  You cannot use jdev 11g for the development of the OFA...
  You must download the patch of jdeveloper on metalink to develop objects of the OFA.

  See this metalink note to find the correct version of jdeveloper, you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1

  Prasanna-

• A doubt in DBC file please help.

  Hi I download one MODEL. File fnd_top/secure DBC
  
  #
  # GUEST_USER_PWD
  # User/password for the Guest user applications.
  # Comments Applications is a public user of Applications
  # with no assigned responsibilities. There is no user of this type,
  # create one in the form of "User Define". Do not use a user with
  # active any responsibility. Note: This setting is for
  # a user of the applications is NOT an Oracle user. The guest user
  # is seeded with 11i.
  
  GUEST_USER_PWD = GUEST/GUEST
  
  for this guest_user_pwd, there is a NOTE: this SETTING IS for a USER APPLICATIONS is NOT AN ORACLE USER
  
  MY QUESTION IS WOULD YOU PLEASE EXPLAIN TO ME THE DIFFERENCE BETWEEN THE USER OF THE APPLICATION AND USER ORACLE?
  
  THANKS IN ADVANCE

  Hello

  MY QUESTION IS WOULD YOU PLEASE EXPLAIN TO ME THE DIFFERENCE BETWEEN THE USER OF THE APPLICATION AND USER ORACLE?

  Application user--> is the user who can connect to the application (but not in the database). All users of the application are in the FND_USER table.

  Database--> is user who can connect to the database. All users of the database are in the table DBA_USERS.

  I believe that this question has been answered in this forum as many times before, so please research if you still want to get more details.

  Kind regards
  Hussein

• does not start conf.data file Windows contain a valid entry os

  Hi my computer gives the following message is displayed after the command prompt used. I can't find the operating system when I use the recovery disc. This box is empty. How can I solve this problem?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• 12 c agent deploy with agent and response URL Protocol file (http/https)

  Hello

  I have installed agent12c on a database server using response with this command file:

  bin/sh agentDeploy.sh - ignorePrereqs - invPtrLoc /oracle/${1}/app/oraInst.loc RESPONSE_FILE=${template_dir}/agent12c/response_file.rsp AGENT_BASE_DIR=/oracle/${1}/app/oracle/product/12.1.0

  The contents of the answer file:

  ORACLE_HOSTNAME = "dbxx. DBC.domain.it ".

  AGENT_PORT = "3872.

  AGENT_INSTANCE_HOME="/Oracle/dbxx/app/Oracle/product/12.1.0/agent_inst".

  OMS_HOST = "xxxxx. DBC.yyyyy.it ".

  EM_UPLOAD_PORT = "4903.

  b_doDiscovery = false

  b_startAgent = false

  b_forceInstCheck = true

  The installation was sucessefull:

  emctl status agent

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.

  ---------------------------------------------------------------

  Agent version: 12.1.0.2.0

  The WHO's version: (unknown)

  Protocol version: 12.1.0.1.0

  Agent home: /oracle/dbxx/app/oracle/product/12.1.0/agent_inst

  File binary agent: /oracle/dbxx/app/oracle/product/12.1.0/core/12.1.0.2.0

  Agent process ID: 22746

  Parent process ID: 22694

  Agent URL: http://dbxxxx.dbc.domain.it:3872/emd/hand /

  Repository URL: https://emoms-int.dbc.domain.it:4903/empbs/upload /

  Starts at: 2014-09-22 14:28:25

  Started by user: oracle

  Last charging: (none)

  Last download successful: (none)

  Last attempt to download: (none)

  Total megabytes of XML files uploaded so far: 0

  Number of XML, waiting for loading files: 0

  Size of the XML files in the upload wait (MB): 0

  Available disk space on the file upload system: 55,48%

  Collection status: activated Collections

  Heartbeat status: (none)

  Last heartbeat to WHO attempt: (none)

  Last pulse successful who: (none)

  Then, at the request of the heart rate to WHO: 2014-09-22 14:13:05

  ---------------------------------------------------------------

  BUT how can I tell oracle to use https and not http protocol?

  Agent URL is now:

  http: //dbxxxx.dbc.domain.it:3872/emd/main/

  I would use protocolo https instead:

  https: //dbxxxx.dbc.domain.it:3872/emd/main/

  11.2.0.3 Oracle Linux

  Set the agent that NS has proposed. If necessary, check this doc below on how to secure the agent.

  Security features

  Kind regards

  -Loc

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!