HttpPushDemo but for the BIS?

Similar Questions

• Something similar to groups of objects, but for the ports? (must be used on an ACL)

  Hello community!

  I'm fairly new, when it comes to firewalls, but I have some experience with routers and switches, so I'm not completely lost.

  Practically, we all know that a group object is a large bucket to throw things and then managing them as a single group, which is very useful for many reasons... so is there something similar that we can use in an ACL for the port?

  Say so, let that I want to allow the following ports:

  • 80
  • 443
  • 25
  • 30500
  • 20500
  • 8080
  • 14600
  • 21
  • 753
  • 22

  And instead of doing something like this:

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 80

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 443

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 25

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 30500

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 20500

  access-list extended dmz_access_in permit tcp host WEB host WEB-EXT eq 8080

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 14600

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 21

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 753

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 22

  do something like:

  dmz_access_in list extended access permit tcp host WEB host WEB-EXT eq PORT_LIST1

  Thank you!!

  PD: Excuse me if some port above are not TCP, if just one example. I just start typing all the numbers that came to my head.

  Hey Rolando,

  On a SAA, you can combine services and protocols based on the source/destination in an object-group service oriented. Your example would look like this:

   object-group service PORT_LIST1 service-object tcp destination range 21 22 service-object tcp destination eq 25 service-object tcp destination eq 80 service-object tcp destination eq 443 service-object tcp destination eq 753 service-object tcp destination eq 8080 service-object tcp-udp destination eq 14600 service-object tcp destination eq 20500 service-object tcp destination eq 30500

  You can create also integrate groups:

   object-group service WEB_PORTS service-object tcp destination eq 80 service-object tcp destination eq 443 object-group service PORT_LIST1 group-object WEB_PORTS service-object ...

  This type of group is going where the Protocol is specified in the ACL:

   access-list dmz_access_in extended permit object-group PORT_LIST1 object HOST object EXT-WEB

• An application like Nike Running... But for the market

  I wanted an app to walk and does not. All of you who have a few apps?

  I use MapMyWalk. I use the free version, and it does everything I want for the market.

• Smartphone blackBerry, what type of plan, I need a carrier for the BIS?

  Hey

  My apologies for this question can be quite simple and boring to answer - but I have searched the site of BB, various Web sites support for carriers in Australiaand nobody seems to be able to answer my question (and I searched these forums - despite having not much of chance)

  I want to get a "BOLD" outright BB and then go on a cheap plan with a company here that has included data (anywhere from 50 MB to 1 GB per month)

  BIS will work with that? If I have a data plan with my carrier, is that all I need? Or I need in my career to do something else?

  As I understand it, I created an account with Blackberry, who run everything, as long as my phone can access the Internet all the time. My career didn't need to get involved other than to provide me with a data plan?

  I'm just a bit confused as I get once I have buy my BB, and what must be my carrier.

  Thank you

  Alex

  Just to have a BlackBerry data Plan is all you need. Check with the carrier even if, as they have several BlackBerry data Plans. Most plans come with Data unlimited (e-mails, but sms messaging may be additional)

• Created recovery 2 discs but for the installation of the OS is used only

  I went to a friends this afternoon and he made the recovery discs and everything went well, 2 discs were made.
  Now, he has just phoned to say he used the discs on his laptop computer, but only one was used then why do 2, is it necessary to n2.
  Ken

  Hi Ken

  And what phone your friend?
  Did he get a choice at first start to decide between 32 and 64-bit operating system installation?

• Hi, I am trying to install updates (as I usually do), but for the last month he returns constantly with error code 646 error - unknown

  I have a lot of important to install updates & it won't let me. I can't seem to find solutions to this problem, I am not all that computer letter so please keep answers in singles. Thank you

  You may have overlooked: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Formula for several cells but ignore the 0 values?

  Is there a formula to multiply the three cells that will allow the formula to ignore a cell with a value of 0 and multiply the other two rather than return a result of 0?

  	A	B	C	D
  1	10	2	5	100
  2	10	0	5	0

  For example,.

  D1 = A1 * B1 * C1

  D2 = A2 * B2 * C2

  I would like the result in D2 to 50 (A2 * A2) instead of 0, but for the calculation to use A2, B2, and C2, if the value of B2 is greater than 0.

  Thanks for your help!

  You can take a look at the article, they can help you. Numbers for Mac: calculate values based on data in cells in a table

  Numbers for Mac 3.0: create formulas and use predefined functions

• export the schema, but for two tables, export only 20 rows

  11.2.0.2/RHEL 5.4
  
  Using expdp, I want to export an entire schema. But for the 2 large tables (say the EMP and DEPT tables) in this diagram, I want to export only 20 records (at random) for them. Is it possible for expdp and impdp?
  
  If this is not possible then, is there any option to have no any line for these 2 tables?

  Christian Christmas Pal Singh says:
  possible, but you must create two files dmp means export of run 2 times.
  1. for complete schema to exclude these 2 tables by the exclusion clause.
  2. use the query clause to filter the data in the second export for these 2 tables.

  Really? is not something that similar work? instead of rownum, if you want truly random, then use example of clause, but it should be based on the amount of sample would make 20 lines for you, then a bit of work there.

  schemas=my_schema
  QUERY=my_schema.table1:"where rownum < 21"
  QUERY=my_schema.table3:"where rownum < 21"
  

  Published by: rjamya on Sep 19, 2012 08:32

• I need phones smart blackBerry my 8330 is put up for BES, BIS

  Hello there-thanks for reading.

  I bought my 8330 from a person who was on Blackberry Enterprise Server.

  I wiped the phone clean several times but unable to send/receive emails.

  In fact, I don't have an icon of e-mail on my screen is optional for the BIS through the installation wizard.

  When I try to "compose email" a message pops up saying "no mail service is configured. You will only be able to save the draft"

  There are also strange settings that make me use a password to unlock the device. A small red lock is located next to "Enabled" under Options > Security Options > General settings > password.

  The first day I got the phone configured by Sprint, I could receive emails (cannot send) but it only lasted 12 hours.

  Any help is appreciated,

  ZISSOU

  Hello

  It is possible that there is a residual political left on the BB, that limits your use. This is a method of cleaning which:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/remove-it-policy-from-personal-PHO...

  In addition, since it is a used device, you must follow all the steps in this KB for the transfer... the other person may have to do the steps listed for "seller".

  Even more, if your new carrier is not identical to the prior authorization, you may need to get unlocked to run entirely on your new carrier... BB see this FAQ.

  Good luck!

• Can I use my 5K iMac as a monitor for the Mac Pro?

  I'm so curious because I really need speed for Final Cut, but for the Mac Pro, you must separately buy things (monitors, keyboards, mouse). For the iMac, it is included, but he really loves * that the Mac Pro has this old crush which is very pixelated to 82ppi, compared to the iMac not expensive 21.5 "without Retina display, it is equal to 102ppi. My iMac 27 "is 5K also, and the iMac is 218ppi. I want a high resolution to get the best view possible, but I can't in the Mac Pro. I would like also to the screen have a built-in webcam and speakers similarly.

  Only through the screen which two computers sharing work normally.

  The iMac 5K does not support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode

• Re: Satellite A210-16F: where to find the latest driver for the graphics card?

  Hello!

  I have a laptop A210-16F Satellite with an Ati Mobility Radeon HD 2600 graphics card...

  After having checked my device manager, I discovered that my graphics drivers are from 2007 which are not good: S but for the life of me I can't find the right drivers anywhere... If you see the screenshot, you'll see that drivers are since 2007 and after I click "update driver" and then "search automatically software update of the driver" never he can't find something and tells me that my drivers are up to date: SS any help would be greatly appreciated!

  Oh, also, my OS is Vista Home Premium (32 bit)

  Thank you!

  http://img269.imageshack.us/img269/3407/61265269.jpg

  Hi mate

  You must use the drivers of Toshiba page
  These drivers are tested and certified for the unit

  Why do you want to update the driver? Just because it s of 2007?
  You have problems with this driver?

• Upgrades for the 8900 XPS GPU

  My machine shipped today and I'm planning a GPU upgrade.  I have currently a 2 GB GTX 750 Ti in my old system and you want to stick with nVidia.  I think I need to go at least to a boost 4 GB GTX 960 or 970 to get a decent life.  Don't want to spend a lot because their architecture Pascal will come out next year...

  What power connectors GPU the PSU 8900 comes with?  What upgrades GPU are you thinking, and the stock PSU it will manage?

  In general, I think that the graphics card for the 8900 updates will follow what works on the 8700.

  Best I can tell, the 8900 has the same power supply as the 8700, and there are six pins of the PCI slots.

  Here is a very long list of what has worked and not worked in 8700 s.

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19611037

  The cliff notes are THAT GTX 960 will work with the Stock PSU.

  Some become GTX 970 s work with the stock power supply, but this is (in my opinion) more load the stock power supply can provide.

  I have a 760 GTX, a GTX 770 and a GTX 970 and the 970 is a significantly better graphics, especially with A-list games. The 770 is good but there are still a few tears and artifacts when all the pleasure of the eyes is set to ultra.

  If your resolution is 1080 p that the 960 GTX is a good choice for the price of $200, but for the high-end gaming 970 GTX is an update worth it even if the cost of the PSU is taken into account.

• Click event does not work for the first choice of object field index

  Hello

  In my application, there is a ObjectChoiceField inMainScreen

  I want to get change Listner of ObjectChoiceField after clicking on index 0. When I am clicking on the second element of the choice field, I am able to move to another screen. But for the first selection of the element, it does not move on the screen.

  if(field == mOcfVehicle)
              {
                  Logger.out("MyProf", "vehicle choice field touched ");
                  int index = mOcfVehicle.getSelectedIndex();
                  Vector vecVID = store.getVehicleID("VehicleID");
                  final String strVehId = vecVID.elementAt(index).toString();
                  UiApplication.getUiApplication().invokeLater(new Runnable() {
  
                      public void run() {
                          // TODO Auto-generated method stub
                          UiApplication.getUiApplication().popScreen(MyProfScreen.this);
                          UiApplication.getUiApplication().pushScreen(new AddNewCarScreen(1, strVehId));
                      }
                  });
  //
              }
  

  Please help me...

  Here it happens little differently. I explain the requirement properly. Suppose that the I am A screen where I have the ObjectChoiceField. I added a choice of X. Now, when I am pressing on the field of choice and selection, it must pass on the screen (B) but that the choice of the field is choice (X) only one, it is not mobile. Now if, after the addition of the choice of two X and Y, if I select go, it's going to screen B. But when again, the field of choice has 2 options X and Y with X as the default selection. There is therefore no chance for me to choose the X.

  Therefore, I have added a Select called default choice. Now, if X is added, field of choice is the choice of towing display: Select and X. And while choosing X, it moves on the screen B.

  Hopefully now, it is good for understanding.

  And can help me please to this: http://supportforums.blackberry.com/t5/Java-Development/How-to-on-the-Camera-Flash-for-a-long-time-l...

  Thank you.

• Programming for the network of Sprint V3M

  Y at - it someone online who could walk me through how and where to enter the codes necessary to activate my phone with Sprint 6-digit?  On the Sprint site, successfully, I registered and activated this phone, but for the life of me, I can't find the place where open this phone programming instruction to enter the 6-digit codes.

  did you call Sprint? If it's a phone that support on their network, so they can tell you how to enter the service menu.

  If it was originally a Verizon phone, then you probably can't use it on the Sprint network.

• Help for the integration of the OAM SSO

  Hi Experts

  I'm trying to install and configure OAM 11 GR 2 to explore features SSO /Federation with one of the applications (OBIEE, Ebiz, Google Apps, or any simple application to start with).

  I'm a newbie to OAM, where could you let me know the best way to achieve this and redirect me to some good posts?...

  It is possible to reconfigure Windows8 (64 bit) with 8 GB RAM machine. ?

  Thank you

  You should try to just get installed first OAM and test a simple test application Hello World. The things you want to one are quite advanced so you shouldn't try to do until you understand and are comfortable with the basic concepts in the first place, that is to say learn to crawl, then walk until you try to run.

  Your machine is pretty low spec, you'll be able to do things based on this topic, but for the more advanced things, you want to do next, you'll need a lot more RAM, and you're better off using Linux (IE Oracle/RedHat linux) than Windows.