Programming for the network of Sprint V3M

Similar Questions

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• accidentally, I changed the default program for the openng exe files

  accidentally, I changed the default program for the openng exe files now I can't reverse my mistake and a lot of things on my count no longer works... I cnt play games or open all programs... what should I do?

  http://support.Microsoft.com/kb/950505

  Note at the beginning of the article that it says that Windows 7 users should go directly to the "Fix it myself" section

  Tricky

• I tried to delete some unused programs of my had drive and the PC deleted wlidcl.dll. How can I get this program for the PC works as before?

  I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs.  What do you suggest me? Thank you

  Norman.--

  E-mail address is removed from the privacy *.

  original title: wlidcl.dll

  Hello

  I suggest to follow the steps below and check if the problem persists:

  Not one:

  Uninstall Windows Live essentials followed the procedure described in the link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step b:

  Download and install Windows Live essential from the link:

  http://explore.live.com/Windows-Live-Essentials?OS=other

• How can I get the download instructions if you buy a new computer and edit programs for the new device

  How can I get the download instructions if you buy a new computer and edit programs for the new device

  Download the CS6 products

  Mylenium

• How can I change the default program for the external application Editor?

  I read on the directions for this line and it reads "select a file type in the left pane."   I don't see where it is in the left pane.  All I see in the left pane is 'The browser start Pages' and a 'How do I' pane.  Nothing with the file types.

  Hello

  Welcome to the Adobe Forums.

  In order to change the default program for the external application Editor. Please follow the instructions below.

  Click on the Edit menu, then choose Preferences.

  Once the dialog box is open.

  Click on file publishers.

  In the left pane, you will find all types of files that you want to change.

  On the right, you'll find publishers for this specific file type.

  If you want to add any other application, you must click on + symbol at the top of the right pane.

  Select the path of the application that you want to apply.

  Click Open.

  If you want to primay you can click available main option at the top right. For more detials please check the screenshot below.

  

  Kind regards

  Rajeev

• How can I make my default program for the Adobe Downloads?

  How can I make my default program for the Adobe Downloads?

  Set up the default program depends on the type of file you download, Ex:-PDF file open in Adobe Reader or Acrobat.

  The downloaded file is opened in the default program set on your computer for this file type.

  The steps may vary for Windows and Mac.

  Windows

  Right click on any file with the file type that you want to change the default program Ex:-Pdf,.

  Select 'open with '.

  and from the list select your application that you want to set default Ex: Acrobat

  Check the option on the bottom, "always choose this application to open this file type.

  Mac

  CTRL + click on any file with the file type

  Go to 'Get Info '.

  Modify the Application in the 'open with '.

  Select 'change everything '.

  Close window 'Get info '.

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

  Original title: Error code: OX8004FF01

  While trying to download microsoft security essentials on a computer running Windows XP Professional with service pak 3

  I received a cannot install security essentials (OX8004FF01 error code)

  I removed all Norton parts from this computer and the firewall is turned on.

  So, what is this code and how to fix the problem?

  I am not able to install the driver for my network printer, is the reason according to HP

  Service: MSIServer

  Microsoft manufacturing

  Version: 0.0.0.0.

  The name of the HP printer file is: 100_228_PS_A10_02_Full_Net_enu_NB.exe

  Any help with these problems would be appricated: * address email is removed from the privacy *

  Hello

  What is the model number of the printer?

  Help with Microsoft Security Essentials issues, contact the Microsoft Security Essentials team. You can use this link to contact them.

  http://answers.Microsoft.com/en-us/protect

  For the printer problem, check these links and see if they help.

  Method 1: Refer to this link.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003.

  http://support.Microsoft.com/kb/315346

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:http://support.microsoft.com/kb/322756

  Method 2: Install fixit from the following link and try to install the drivers.

  How to fix MSI software update registration corruption issues

  http://support.Microsoft.com/kb/971187

  Also visit these links:

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  How to install a printer driver locally for a remote printer in Windows XP: http://support.Microsoft.com/kb/282842

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Impossible to download programs from the network due to the inability to save in a temporary directory

  Greetings,

  I am trying to download the software of the network and the process fails with the following error:

  C:\Documents and Settings\Sybase\Local Settings\Temp; C:\Windows\Temp could not be saved, because an unknown error occurred.

  Try saving to a different location

  However the program I cannot choose another...

  Help!

  Kind regards

  Jean-Pierre

  Halima,

  Thanks for the reply.

  1. what browser you use to download the files?

  I have been using Mozilla. Later, I used IE and had better luck.

  However, I have disabled Java in Mozilla.

  2 when was the last time it was working fine?

  Before the latest update of Java? I'm really naïve.

  3. it happens with all programs you download?

  Yes.

  I think I'm good now, but will follow your instructions for debugging if it persists and will let you know.

  Jean-Pierre

• Cannot share the internet connection on the network with sprint card

  Hi all

  I'm stumped on this one. I'm working on my network of fathers, and he lives in a rural area. Unfourantely, there are not a lot of internet service here. It uses a printed card that connect locally to a windos vista home pc. From there on, the connection is shared and that the pc is connected to a linksys router. The router, then hosts a wireless network and hard line connections. About three weeks ago, the Internet stopped working except the computer, map of sprint is hung directly. I tried the following options below to solve the problem.

  1. I can plug the card sprint to any computer and it works.

  2. I replaced the network adapter on the host computer

  3. I have tried the card sprint on other computers and tried to share from there. Same result

  4. replace the router

  5 opportunity anotehr card Sprint which has been known to work

  6. replace the network cable between pc and router

  7. I tried removing the router from the equation and ran a network of host pc card form for directly to another computer

  8. the host and also renovated of other computers reformated

  9. do you have an ipconfig/release and renew

  10 tried sharing all NICs on the host PC

  When sharing the connection, I can see all the computers on the network. They arise, there is simply not an internet connection.

  The only mistake that I seem to get is not able to find the DNS. I put everything on dhcp.

  Any ideas that anyone can come would be most appreciated. Thank you

  Hello

  Step 01:

  I suggest you follow the same steps as expected here to set up the ICS (Internet Connection Sharing) host computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Step 02:

  I also suggest you to follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-settings-for-ICS-Internet-connection-sharing

  For more information, please follow the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

• Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

  As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

  I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

  I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

  After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

  Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

  Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

  Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

  I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

  Try to run This Fix - It.

• How to share program for all network users or domain?

  Hello
  I want to share the program for all the network or the user's domain, but I don't know how to do, if it is possible please help me please.

  Ask your domain administrator to place it in a shared folder, and then create a shortcut to each desktop.