HTTPService fail to send parameters
Flash Builder 4.5
Flash Player 10.3
Windows 7 pro 64-bit
problem,
I send an object as parameters http, but it never come on the web server.
help welcomed.
more information,
Flash builder network monito shows the http request to include parameters.
Wireshark shows that there are no parameters in the http request.
source code
< fx:Script >
<! [CDATA]
import com.adobe.serialization.json.JSON;
import com.adobe.serializers.json.JSONEncoder;
Import mx.rpc.events.FaultEvent;
Import mx.rpc.events.ResultEvent;
Import mx.rpc.http.HTTPService;
protected function button1_clickHandler(event:MouseEvent):void
{
var streamParams:Object = new Object;
streamParams.title = "demo";
streamParams.quality = 1;
vidictionService.contentType = "application/json";
vidictionService.send (streamParams);
}
protected function httpResultHandler(evt:ResultEvent):void
{
trace ("InitView.httpResultHandler ()" + evt.result.toString () ");
navigator.pushView (seen. MobileLiveHomeView, {streamParams:evt.result});}
}
protected function httpFaultHandler(evt:FaultEvent):void
{
trace ("InitView.httpFaultHandler ()" + evt.toString () ");
}
[]] >
< / fx:Script >
< fx:Declarations >
< s:HTTPService id = "vidictionService".
url=" http://192.168.2.104:9000/stream/record "
Fault = "httpFaultHandler (Event)" "
result = "httpResultHandler (Event)" "
resultFormat ="object"
showBusyCursor = "true" / >
< / fx:Declarations >
< s:Button low = "10" label = "Publish" click = "button1_clickHandler (event)" horizontalCenter = "0" / > "
found the solution:
vidictionService.method = "POST";
vidictionService.send (JSON.encode (streamParams));
Tags: Adobe AIR
Similar Questions
-
SSD drive, Toshiba canvio aeromobile wireless fails to send the signal
disc ssd wireless works fine.
copy files readings of wireless works fine
WIRELESS DSS APP store updated without internet< strange="">
after update 'wait 5 minutes and reconnect'
Wireless hard drive fails to send a signal that can be picked upTroubleshooting
Drive hard renovated,
Reset hardrive with pen (button on the top of the car)
turned on
Turned on and waited 10 minuteshard drive flashing green on the battery indicator. Blue solid indicator of ssd wfi
SD card is removed. seeing the card SD is out.I am at a loss.
I have the exact problem right now
And looks, no Toshiba is interested.I'll go back to bnh.com (where I bought the product) and give a BAD comment * 0000
disc ssd wireless works fine.
copy files readings of wireless works fine
WIRELESS DSS APP store updated without internet< strange="">
after update 'wait 5 minutes and reconnect'
Wireless hard drive fails to send a signal that can be picked upTroubleshooting
Drive hard renovated,
Reset hardrive with pen (button on the top of the car)
turned on
Turned on and waited 10 minuteshard drive flashing green on the battery indicator. Blue solid indicator of ssd wfi
SD card is removed. seeing the card SD is out.I am at a loss.
-
Dear Sir.
Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.
OS: Win XP Prof
Bluetooth device: Widcomm connected to the desktop computer
Thank you & best regards
Magali U
Hey Ma U,.
Follow the steps in the article.
How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2
-
How to make a link in textflow that send parameters to a function?
How to make a link in textflow that send parameters to a function?
In the examples included with the weekly builds, there is an example of CustomLinkEventHandler.as. Passing parameters would be in the CustomClickHandler function. You can set the parameters to the LinkElement that user using the setStyle API styles.
Hope that helps,
Richard
-
Test project... DVD "Encode failed" after sending in yet?
Starting from that? in forum Pr pretty still since this is where the project began.
Background: started this project with the old computer system and first Elements 7. Answers Forum makes me think of upgrading to Pr Pro do multi cam with different types of sources... I've updated Pr CS4... built a new computer system to support... (as an aside) had time incredibly difficult troubleshooting what was a bad memory module. Project for later and later each month. Thus, on the problem at hand.
New system: because that's all new all drivers are updated etc.
Premiere Pro CS4 version 4.2 creative suite includes again etc.
Windows 7 Premium Home 64 (upgrade from Vista Home Prem 64)
Mobo: EVGA P55 SLI
CPU: I7 860
GPU: GTX 260 (two in SLI)
HD 3: 1 = TB, x 2 = 750GB each 2.5 to total
Currently only 2 GB of Ram (4 GB original, has no replacement of 2 GB on the way)
LG Blu Ray burner
DVD/CD (2nd optical drive)
project: two sources of the camera. CANON GL2 (DV), Canon HF S100 (HDV).
Context is material in concert, so two synchronized cameras, a master audio track.
I play a little test project (the sequence is about 20 minutes) to learn all the necessary steps to complete the finals.
Choose the parameters of the project: NTSC DV 48 big screen, in the final result will be DVD
I have synced with success the two cameras source clips, again it is AVCHD (.) MTS) the other DV (.avi).
created the nested sequence, active MultiCam, published in monitor MultiCam! Yes, well.
Now I have this Multi Cam sequence send on DVD. So, after watching the tutorials first and I still have this on PR...
File... Dynamic links home... Send again.
In the still, I add a basic with appropriate etc. links menu tests very well... well... looks all together. Go to Build w / DVD in the drive, starts fine, opens the window for coding, gets a ways (20-30 minutes), then the pop-up window error that says: 'Encoding failed', a window main sub says:
'Building Progess transcoding... '. Failed.
Tried to write the same test sequence to the Image of the DVD on hard drive, same result, +/-20 minutes and "encode failed.
Read the other discussions of the forum to find clues. Someone suggested to another for Pr Pro sequence as a avi file export. And then integrate this still active and burn DVDs.
I tried to export as avi using this same MultiCam editing sequence of Pr Pro.
This opens the Adobe Media Encoder. from there, I get a different error...
"ImporterProcessServer.exe has stopped working".
This error appears after 06:59, also says 08:13:31 remaining.
I ordered more RAM. In addition, I get 2 GB of spare module soon. My feeling is that the current memory in my system is not present, but not causing these problems. However, I don't know if it's true.
Of course, I'm a beginner, PrPro only to learn from the limited experience of PrElements and online tutorials and any help I can find. I was excited that I actually accomplished the steps I'm going to need for this project. But it's kind of become like the exodus from Egypt, and I don't want to spend 40 years I was wondering in the desert before reaching the promised land. Please help me to cross the Jordan!
Kenny
I was talking about video card drivers, drivers for the audio card, an add-on
PCI or PCIx you have and the optical drive firmware cards.
Let us know how the extra RAM.
-Jeff
-
I uninstalled Office 2010, this has messed up my computer > cannot send the email and my old Office 2002 none no longer works
My Office 2010 Professional Plus activation failed because I exceeded the number of facilities on my computer. The computer on which the activation failed now on has many damaged programs operational. Outlook Express 6 does not emails, send him previously installed Office 2002 does not work, and the computer is extremely slow opening of web browsers and download content. System Restore did not restore anything at all.
After the activation failed I of course used Add/Remove programs to uninstall Office 2010. This is when all programs no longer works correctly.
Hi AJ 400,.
· What happens when you try to send mails?
· You get the error message?
· Who are you referring when you say "when all programs stopped working properly?
Follow these methods.
Method 1: Follow the steps in the article.
http://support.Microsoft.com/kb/813514
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.
You can also post your query related to the Microsoft Office products in:
-
0x8000CCCDF error AUTHENTICATION FAILED when sending or receiving gmail via Windows Live Mail
How to fix error 0x8000CCCDF
When I open Windows Live mail, I get... Can't send or receive messages for the Gmail accoune (mymail). (1) account
Download header for the 'BBY' folder did not complete. The operation was cancelled by the user. (for now, I have no "BBY" in Favorites or elsewhere)
{The server response: AUTHENTICATION FAILED} ivalid certificate {break}
Server: 'imap'. gmail.com
WindowsLiveMail ID: 0x8000CCCDF
Protocol: IMAP
Port: 993
Secure: (SSL) Yes
I also get a pane open asking me to confirn login, and when I get the pw and email, the response "not recognized".
I have already created a new restore point and the problem persists. Please notify.
Vista-IE8 32
Thank you
PS, am aware of this site being offline may 20, 2011, I've waited this long, a few days will be okay... I don't have a job in any case. : ()
Hi place Diago,.
The question posted here, it fits better the following forum
-
How can I send parameters with a link? How to read the settings in the linked page?
I need to send the file name of an image to display on the linked page and can not find a way to do it. I'd appreciate any help!
With the help of PHP, the parameters are sent by the url like this:
http://MyPage.php?name=$ name & state = $state
Before the link to appear, the values of $name and $state must be true, like this:
$name = "George";
$state = "Nebraska."
The receipt page (mypage.php) receives the variables like this:
$name = $_GET ['name'];
$state = $_GET ["State"].
-
Question of Gmail RFC 5321, fails to send emails
I use Gmail with TB 38.3.0 on MAC OSX 10.9.5. In the last days, I was repeatedly making the following failure message:
"An error has occurred when sending mail. The mail server responded: 5.1.2 the specified address is not a valid address of RFC 5321. y77sm17688366wme.15 - gsmtp. Please verify that your email address is correct in your account settings and try again.
It comes from TB in a message of error rather than the demon of Gmail mail dialog.
I use a hidden email address that we have passed the URL some time ago and couldn't change our e-mail settings.
It becomes a real problem, I love TB and cannot pass gmail... can anyone help?
Unfold in Google:
Hey all -
Yes, last week we deployed a change that applied validation of the MAIL FROM argument to be a valid RFC 5321 e-mail address.
This validation occurs on all servers SMTP Gmail works, so for incoming MX servers, smtp.gmail.com MSA presentation servers and GfW SMTP relay servers. Previously, we were doing validation at later stages that could cause the message bounces and other issues. This change pushed the validation of the first use so that people are more aware of the problem.
In the case of the MSA (third with smtp.gmail.com and user connections clients), we have rewritten the MAIL FROM to match one of the personalized valid user addresses (or vacuum in the case of rebounds) to a large number of years. Apparently, this has allowed to have bad configuration which has persisted for a long time, people. It also means that we see a lot of failures of third party such as Foscam and Samsung cameras and software of third parties such as SyncBackup devices. We may have to relax those requirements in the case of the MSA for this reason, but the ETA of such a solution is perhaps the end of this week or early next week.
We are not planning to relax the requirements for MX and relay, however. In these cases, we do not really have a good address to substitute to, and if we don't override it, messages are unable to bounce back, which can cause people to perceive as loss of message delivery failures.
In addition, a warning: we are grateful for traces of transaction SMTP which provided several people, but be aware that the trace of the transaction for an MSA transaction will contain the authentication information that people can steal and use. Please remove or XXXX long character strings in the AUTH of the newspaper part.
Thanks for the reports and sorry for the confusion.
Brandon
-
"If I click on a contact in contact payne of a window of Scripture, it happens in the To: put as < ' joeblogs"@talktalk.com > for example. Even if in the address book, it is [email protected]. When I try to send the e-mail, he returned as the address unrecogniseable and is not sent. If I remove the < "" > characters by hand, it works. What I am doing wrong? Help, please!
It adds the <>because there is a space in the address which causes its nullity. For some reason that escapes me, it allows you to add faulty addresses for outgoing mail.
-
KB981852 is a problem in windows mail, mail fails specifically send messages with URLs.
Mail is unable to send messages that contain an embedded URL. It returns an error message: the system Cox.net
Ox800CCC0F
I suspect KB981852 nor any other update released this week has nothing to do with the error 0x800CCC0F.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmDisable e-mail scanning in your antivirus application. It offers no additional protection, it may be the cause of the problem, and even Symantec said that it is not necessary:
Disable e-mail analysis won't let you without protection against viruses that are distributed as attachments to email. Norton AntiVirus Auto-Protect scans incoming files as they are saved on your hard drive, email and attachments to emails. Scan to email is just another layer on top of that. To make sure that Auto-Protect provides maximum protection, keep active Auto-Protect and run LiveUpdate regularly to ensure that you have the most recent virus definitions.
http://Service1.Symantec.com/support/NAV.nsf/docid/2002111812533106~~~~~~~~~~~~~~~~~~~~~~~~
You will find ongoing support for Windows Mail in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads
Please take note of it.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: I can't send a file, when I use the e-mail to a Web site. It takes me to my Outlook Express, but there is no option to send when I click on "file." Outlook Express Version 6.
Outlook Express Version 6.
First of all, you need to know what e-mail program you use. Thanks for replying...
- What is your version of Windows.
- What does say in the banner blue at the top of your e-mail program?
- In help | On..., that says it?
If you are sure that you are using to see OE these to be sure it is set as default.
Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express.
Making OE the default e-mail client:
http://www.oehelp.com/oedef.aspxFor the links in the email:
http://www.oehelp.com/oelnk.aspxAnd:
http://support.Microsoft.com/?kbid=306098"Send to" and e-mail links do not work using Outlook Express as default:
http://support.Microsoft.com/?kbid=306098If no help above, try in a new identity.
File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
-
I use Microsoft Outlook 2003 and when I try to remove items in the Outbox which, for one reason or another, has not sent my computer keeps trying to send them. I send 1 of 4 at the bottom of my screen. How can I get rid of emails so that my computer recongizes that they left and stops trying to send them. Any help in this matter is greatly appreciated. Thank you. Dolly
Check first to work offline and then open the Outbox and delete messages.
-
When I scan a doc at the end I have to press send to send, it fails to send
I have a problem when scanning and sending of the RFSO by email, my email is google chrome
Hello
The send function to send a file to an email, when an e-mail client is installed, configured and is selected as the default e-mail program.
Please visit the link mentioned for more information below:
http://Windows.Microsoft.com/en-us/Windows7/send-a-file-in-e-mail
I hope this helps.
-
[CME 9.1] Phone IP 3905 fails to send DTMF tones to the external network.
Hi all!
We have three types of SIP phones in our CME 9.1: 3905, 6941 and 8941. All phones except 3905 send DTMF tones successfully through our operator. Here is "debug voice ccapi detail" what "206" (ip phone 3905) extension 93274343 external phone calls and trying to send numbers. Config is to be attached. Also, a part of config here:
voip phone service
list of approved IP addresses
IPv4 10.0.0.0
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
service additional h450.12
no additional service moved temporarily sip
no service additional sip refer
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
H323
SIP
Registration Server expires 120 min 60 max
!
voice class codec 1
g711ulaw codec preference 1
g711alaw preferably 2 codec
!
!
Global voice registry
FMC of fashion
source-address 10.10.0.41 port 5060
3 timeouts interdigit
Max - dn 100
Max-pool 80
load 8961 sip8961.9 - 2 - 2 SR 1-9
authenticate the registry
authenticate the defagroup.com Kingdom
time format 24
date format D/M/Y
Flash TFTP-path:
create the profile synchronization 0001013651736503
Hi all!
We have three types of SIP phones in our CME 9.1: 3905, 6941 and 8941. All phones except 3905 send DTMF tones successfully through our operator. Here is "debug voice ccapi detail" what '206' extension 93274343 external phone calls and trying to send numbers. Config is to be attached. Also, a part of config here:
voip phone service
list of approved IP addresses
IPv4 10.0.0.0
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
service additional h450.12
no additional service moved temporarily sip
no service additional sip refer
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
H323
SIP
Registration Server expires 120 min 60 max
!
voice class codec 1
g711ulaw codec preference 1
g711alaw preferably 2 codec
!
!
Global voice registry
FMC of fashion
source-address 10.10.0.41 port 5060
3 timeouts interdigit
Max - dn 100
Max-pool 80
load 8961 sip8961.9 - 2 - 2 SR 1-9
authenticate the registry
authenticate the defagroup.com Kingdom
time format 24
date format D/M/Y
Flash TFTP-path:
create the profile synchronization 0001013651736503
Register of voice dn 6
number 204
call-forward noan 201 timeout 20 b2bua
Register of voice model 1
function key 1 Redial
function key 2 Cfwdall
function key 3 Hold
function key 5 Trnsfer
function key 6 DND
!
voice dialing plan registry 1
type of 7940-7960-others
model 1...
2 9810 model *.
model 3 9...
Model 4 98...
Register of voice pool 8
Mac ID 64D8.14A5.01B4
type of 3905
Number 1 dn 8
numbering plan 1
DTMF-relay rtp - nte
codec voice-class 1
206 206 username password
No vad
voice POTS dial-peer 1
translation-profile out in the city
destination-model 9 t
port 0/0/0:15
Retail ccapi voice 'debug' is here:
phone #.
* Dec 27 16:45:22.095: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth = 80, Call Id = 817
* Dec 27 16:45:22.095: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Call total count = 0, call Voip Count = 0, Count MMoip call = 0 x 0, bandwidth = 80
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/cc_api_call_setup_ind_common:
Interface type = 0, Protocol = 3
* Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/ccCheckClipClir:
Part number is provided by the user
* Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/cc_api_call_setup_ind_common:
After checking the number translation:
Number = 206 (TON = unknown, NPI = unknown, not projected = screening, presentation = authorized),
Called number = 3 (TONNE = unknown, NPI = unknown)
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 0, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 1
* Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_insert_guid_pod_entry:
Incoming = TRUE, Call Id = 817
* Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_incr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
phone #.
* Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_incr_if_call_volume:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0
* Dec 27 16:45:22.099: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
Corresponding settings; Called number = 3, call transfer Consult Id =
* Dec 27 16:45:22.099: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
No matching node
* Dec 27 16:45:22.099: / / 817, A3B9036582FD, CCAPI, cc_api_set_transfer_info:
Call transfer Reset
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, ccCallDisconnect:
Start calling accounting;
Call Entry (Incoming = TRUE)
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, ccCallDisconnect:
Value = 28, entry calls (disconnect the Cause = 0)
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth =-80, Call Id = 817
* Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, cc_api_update_interface_cac_resource:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0x0, bandwidth = 0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_decr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_decr_if_call_volume:
Call total count = 0, call Voip Count = 0, Call MMoip Count = 0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_guid_pod_entry:
Incoming = TRUE
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:
Total Call Count = 1, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:
Total Call Count = 0
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:
Removal of profileTable [0x336F00D4]
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallGetVoipFlag:
Mask of data bits = 0 x 2, Call Id = 817
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallGetVoipFlag:
Flag = FALSE
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallSetVoipFlag:
telephony #Flag = FALSE, data bits mask = 0 x 2, call Id = 817
* Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallSetVoipFlag:
Call the entry (Voip AAA Flags = 0x0)
* Dec 27 16:45:22.559: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
phone #.
* Dec 27 16:45:28.995: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth = 80, Call Id = 818
* Dec 27 16:45:28.995: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:
Call total count = 0, call Voip Count = 0, Count MMoip call = 0 x 0, bandwidth = 80
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/cc_api_call_setup_ind_common:
Interface type = 0, Protocol = 3
* Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/ccCheckClipClir:
Part number is provided by the user
* Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/cc_api_call_setup_ind_common:
After checking the number translation:
Number = 206 (TON = unknown, NPI = unknown, not projected = screening, presentation = authorized),
Called number = 9 (TON = unknown, NPI = unknown)
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 0, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 1
* Dec 27 16:45:28.995: / / 818/A7D5DC978303/CCAPI/cc_insert_guid_pod_entry:
Incoming = TRUE, Call Id = 818
* Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_incr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
phone #.
* Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_incr_if_call_volume:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0
* Dec 27 16:45:28.999: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
Corresponding settings; Called number = 9, call transfer Consult Id =
* Dec 27 16:45:28.999: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:
No matching node
* Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_api_set_transfer_info:
Call transfer Reset
phone #.
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:
VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:
Priority no more than Routine
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
Before COPYING - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
AFTER COPY - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)] DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
Before COPYING - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:
AFTER COPY - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)] DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:
VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:
Priority no more than Routine
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:
VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]
* Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:
Priority no more than Routine
* Dec 27 16:45:34.827: / / 818/A7D5DC978303/CCAPI/ccCheckClipClir:
Part number is provided by the user
* Dec 27 16:45:34.827: / / 819/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:
Total Call Count = 1, entry calls (call count On = FAKE incoming call = FALSE)
* Dec 27 16:45:34.827: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:
Link = TRUE, Id = 818, bound Call Id = 819 Call Binder
* Dec 27 16:45:34.827: / / 819, A7D5DC978303, CCAPI, cc_insert_guid_pod_entry:
Incoming = FALSE, Call Id = 819
phone #.
* Dec 27 16:45:34.827: / / 819, A7D5DC978303, CCAPI, cc_set_voice_port_value:
CC_IF_TELEPHONY: Echo = 0, = 0 Playout
* Dec 27 16:45:34.831: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:34.831: / / 818/A7D5DC978303/CCAPI/ccCallGetContext:
Context = 0x33C6F520, Id = 818 Call
* Dec 27 16:45:34.831: //-1/xxxxxxxxxxxx/CCAPI/cc_set_outpulsed_digits:
set 3274343 = outpulsed_dialstring
* Dec 27 16:45:35.399: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:35.399: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:45:35.403: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:
phone #Bind = TRUE, Binder Call Id = 818, bound Call Id = 819
* Dec 27 16:45:35.559: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:
Link = TRUE, Id = 818, bound Call Id = 819 Call Binder
phone #.
* 16:45:45.199 Dec 27: % LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:14, status changed to
phone #.
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:
Start calling accounting;
Call Entry (Incoming = TRUE)
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:
Value = 16, entry calls (disconnect the Cause = 16)
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:
Call the entry (disconnect the Cause = 16)
* Dec 27 16:46:02.215: / / 819, A7D5DC978303, CCAPI, ccCallDisconnect:
Start calling accounting;
Call Entry (Incoming = FALSE)
* Dec 27 16:46:02.215: / / 819, A7D5DC978303, CCAPI, ccCallDisconnect:
Value = 16, entry calls (disconnect the Cause = 0)
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/cc_api_update_interface_cac_resource:
Hwidb = GigabitEthernet0/0, bandwidth =-80, Call Id = 818
* Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/cc_api_update_interface_cac_resource:
Call count total = 1 call Voip Count = 1, Call MMoip Count = 0x0, bandwidth = 0
* Dec 27 16:46:02.227: //-1/A7D5DC978303/CCAPI/g113_calculate_impairment:
(delay = 79 (ms), loss = 0%), Qi = 0 participants Io = 0 = 0 = 2 Ie = - 1 Itot = 1 DLI
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_decr_if_call_volume:
10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_decr_if_call_volume:
Call total count = 0, call Voip Count = 0, Call MMoip Count = 0
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_guid_pod_entry:
Incoming = TRUE
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:
Total Call Count = 1, entry calls (call count On = FAKE incoming call = TRUE)
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:
Total Call Count = 0
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:
Removal of profileTable [0x336EFA6C]
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallGetVoipFlag:
Mask of data bits = 0 x 2, Call Id = 818
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallGetVoipFlag:
Flag = FALSE
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallSetVoipFlag:
telephony #Flag = FALSE, data bits mask = 0 x 2, call Id = 818
* Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallSetVoipFlag:
Call the entry (Voip AAA Flags = 0x0)
* Dec 27 16:46:02.227: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_guid_pod_entry:
Incoming = FALSE
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_call_entry:
Total Call Count = 0, entry calls (call count On = FAKE incoming call = FALSE)
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_call_entry:
Removal of profileTable [0x336E75C4]
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallGetVoipFlag:
Mask of data bits = 0 x 2, Call Id = 819
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallGetVoipFlag:
Flag = FALSE
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallSetVoipFlag:
Flag = FALSE, data bits mask = 0 x 2, Call Id = 819
* Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallSetVoipFlag:
Call the entry (Voip AAA Flags = 0x0)
* Dec 27 16:46:02.275: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:
Entry call is not found
phone #unde all
The CME version is 9.1
Version of the IOS is 15.3 (1) T (also tested in 15.2 - the same issue)
All ip phones have the last firware (9-2-2-0), also I have already spent some of them (9-2-1-0) - the problem persists.
Hello
I think the best is to capture a trace of sniffer on the phone directly, we will be able to see if the phone itself sends the numbers.
You can also enable some debugs:
Deb voice ccapi inout
messages ccsip deb
Media ccsip deb
That should be enough to isolate the problem
--
Jorge ArmijoDo not forget to rate helpful responses and identify useful or correct answers.
Maybe you are looking for
-
Freezes and restarts on 2015 5K running El Capitan iMac and am ready to freak me out
Hi guys,. If I posted my check and reports being panic, could someone tell me what caused random freezes and restarts on my iMac 5 K - ish, El Capitan running? I am a designer/Retoucher and I am in the middle of a big job, of course. He went on and o
-
Satellite Pro A60, keeps returning to start towards the top of the screen and wont start
My A60 PC refuses to boot. It was working fine when a blue screen came with random lines streaming to the bottom of the screen, the style of the matrix, and then he stopped. When I try to turn it on, turns on the screen "in touch with tomorrow", but
-
TextEdit using the Internet?
TextEdit uses the Internet for some reason when I create a new document or change an old? The reason why I ask because I had begun to suspect that its employees were somehow reading my projects of TextEdit so I started typing short paragraphs that w
-
HP EliteBook 8540w blue screen after upgrade KTH memory X3BS / 4G
Hello I bought two new Modules of KTH X3BS / 4G for my Elitbook 8740w. They appear in the BIOS as 8 GB. RAM test, says that everything is oke. When I start the laptop, there are all kinds of blue screens. Above all, he said DRIVER_IRQL_NOT_LESS_OR_EQ
-
Used the name of the computer changes C: drive
I was given a used computer which has XP is installed with Microsoft Office. When I download programs, it reads the previous owners data and apply it to me. I need to change the name, profiles and registry information for me. How to do that on the C: