hunting of the image

Similar Questions

• How lighten (or darken) Sections of the images!

  Hello

  I've transferred a video (which has been converted to a bunch of reel 8mm I think a long time ago) Pro via a DV connection.  I recorded all of the duration of the video directly in Pro (like setting: 32 audio DV), and it's on my computer as an .avi file.  So, I just wanted to know:

  1. This is my MAIN question - is there a way to now lighten or darken only certain sections of this video (on the timeline) - that some of the images of the late - 1940s is very dark (or light quite a few times too)?

  and 2.  What setting should I use to export to burn on a DVD (I actually not burned the sequences of Pro on DVD yet)!

  Thank you very much..

  If I understand the situation, then just cut your Clip, sequences and apply / adjustment of the correction of the effects to each segment, say the levels or fast color corrector.

  I would be first to experiment with the effects (such as those mentioned above), until you have found the one that gives you the control you need, then apply on the Clip complete, uncut, make these cuts and then perform the individual to each according to needs adjustments.

  If you find adjustments, between segments, a little discordant, then just add a crossfade between the segments.

  Good luck

  Hunt

• Black border around all the images from my video.

  I'm new to the forum here and am struggling to find an answer to my problem and I was wondering if someone could help me. I use elements adobe first 9 create a photo slideshow.  I have about 90 photos, with several of them and audio text throughout all this.  I don't know very well this program, I used it once to make a video.  When it's over, I burn it to a dvd.  The problem I have is that when I burn it to a dvd and play in my dvd player, the photos are of size reduced and there is a black border around them (all 4 sides).  Do you know what I can do to make it go away?  The last video I had not so I'm not sure what I did with this one.  And I tried to compress images and it changed nothing.

  Thank you very much!

  Alisha

  Lish8,

  If some of the stills are smaller than the size of the frame of the project, you will want to either their scale exactly, if required for the extensions to match, or you want to use the default size of the image scale, but take note: scale to the size of the picture by default dimensionnera only the size of fist to the rider, so if the Ratio of Aspect is off say that Images are in 16:9 and image of the project size is 4:3, you'll still have a few black bars.

  If the Images are close, I would say that you are using the fixed effect > Motion > scale, to increase the scale, so that the scope of the draft framework is filled on all sides. It will be actually reframe the view of the stills to the Aspect Ratio of the size of the image of the project. If you don't harvest like that effective, simply adjust the fixed effect > Motion > Position, to get a better harvest.

  The holds of same for still Images, which are a bit larger - I would manually scaling those to match the project frame size.

  That's why Steve recommends a slightly larger Image, that the size of the frame of the project - it gives you a bit of room for manoeuvre, in the final scale and Position.

  Good luck

  Hunt

• Size of the image - confusion report l / h

  I was asked to re - edit a video game totaling about 7 hours of footage. I got 4 DVD where I import the VOB files in prepro. When I play the original DVD on my desk, the image quality is good, she is in 4:3 format and it occupies the major part of my 19 "wide screen monitor. When I import VOB files, here is the penetration prepro therein:

  Type: MPEG Movie

  File size: 1016,0 MB

  Image size: 720 x 480

  Frame rate: 29.97

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 00:48:15:16

  Average flow: 358 KB/second

  Format of the pixels: 0.9091

  I created some transitions of title in After Effects that also use the preset of 720 x 480 (DV NTSC) with 0.91 Pixel Aspect Ratio. However, when I reading the titles AE or VOB assets within prepro, the size of the image on my screen is quite small (about 1/4 the size of my screen). When I send the sequence again, it also produces a small image. The menu I built using a PSD file (720 x 480, 72 dpi, 10.0 "x6.7") However, plays like an image full screen, the way I hoped the video would play.

  I know there's a mismatch here somewhere, but I don't know where the problem lies. I have read a good deal online but keep going in circles. I understand there are questions about image size and pixel formats and I thought I was being careful in selecting 720 x 480 throughout the projects, but it seems that I missed something. Advice to point me in the right direction would be much appreciated.

  Paul,

  This sounds like a classic mismatch between your images and your sequence.

  The configuration of your sequence is (4:3) NTSC DV Standard? If this isn't the case, once imported, one of your VOB simply drag to the new icon to create a corresponding sequence. Then the Clips should complete frame of the sequence.

  Good luck

  Hunt

• Change the color of a part of the image

  CS4 4.2.1

  I want to change the color of a small circular area of the image (more precisely, a mic windguard) from white to a less intrusive darker color.  The movements of the area a bit during shooting, but not too much.    How?

  Tim,

  I'm happy to hear to remove. Who will be the best.

  Discover Track Matte Keying, because it can be very useful for all sorts of things, follow-up of blurs (think license plates and faces), to soften skin tones, to the addition of "cupcakes" to a microphone...

  Sorry for the Internet connection. I was worried that we had been so far in left field, who fled from you.

  Good luck

  Hunt

• What do you do when a DVD is the only one of the images that you got?

  OK, so here is the story, I posted something like this about a week on a discussion forum earlier, but now some of the components have changed.

  A family member took some of our reel 8mm film transfer to have put images on DVD somewhere. Well the DVD's very, but I wanted to participate in this DVD and edit it so that I could make a film tribute of documentry about my father who died awhile back. On this DVD, ago about 8 minutes from the right sequence of him I would use, so I used a trial DVD Ripper/converter software and converted to MPEG2 and the results were excellent, quality appeared just as good as the DVD and I'd be fine with use for my documentry/tribute film, when I imported into first 1.5 it plays fine on the monitor and he actually plays great on the timeline, no complaints. Now when I'm going to make it, he plays all jerky as executives get all messed up or something. On this earlier discussion I posted this information, people had replied that I need to get the 8mm film and transferred it to mini DV or on a hard drive, so I can edit it from there. Although the problem is the film 8mm original got thrown after the DVD, so all I have is the DVD. Is there any setting I can change in first it is so jerky all like it when I make it or is it possible that I can have the DVD transferred to mini DV tape and then change it to first as usual? I don't know what to do and I really need the images on the DVD. I realize I'm going to lose quality, but that's all I have, so I have to make it work. Video transfer locations have the opportunity to put a DVD into a format which usually lose a lot of quality, is it possible to transfer mini-DV or is there a way I can? Please, please help,

  Thank you

  Jason

  For those following along at home, I said to Jason by PM.

  A large part will be eliminated, but given the situation, my recommendation is to use either a digital video camera with passthrough (or bridge of A & D) capabilities to food from the drive of DVD and DV - AVI Type II capture for editing. Yes, there will be always the first compression MPEG-2 (no way around it), and then, if the DVD-video is the scheduled release, another MPEG-2 transcoding.

  I had suggested going back to the maximum with the flow, transcoding this topic to use in a DVD-video.

  I hope that someone else has a plan even better for Jason, so that can get the best possible result, regardless of what the source of the layer footage is in this case.

  It is also unnecessary to suggest that goes back to the original 8mm, they no longer exist. Obviously, if possible, which would be ideal and fair telecine on a miniDV cassette. Unfortunately, this is not a possibility.

  Open to other ideas,

  Hunt

• To copy the images to the new file in Adobe Premiere element 7

  Hello

  I have a video that I'm working on, where I want to take 'partial images' clip and save to a separate file.

  I watched archiver project, which seems to want to save all the images in the video.

  I've seen suggestions to copy and save in a "new file", if I don't see where I create a new file. I can create a new folder.

  There must be a way to be able to copy and save parts of a video in one separate file other than deleting all the unwanted and save as a new project.

  Any ideas what I'm missing?

  Thanks in advance.

  If I understand correctly what you want to do, probably the best way to do is export, using the WAB (work area bar). You can set it for JUST the pictures you want, and then export to DV - AVI, or just what works best for your specific property. This will create a new file just AV section you set the WAB.

  It is an example of use of the WAB:

  

  This shows using the WAB to render just this article, but it works for export too. Just be sure to set the 'work area bar' and not the entire project.

  Good luck

  Hunt

• Rule to the CSS style question: positioning of block next to the image level

  Hello

  I have this site for example: http://www.ecstechnics.com/modules/page.phtml?dimensionid=18 & pageid = 24 and I had a previous question on this topic: http://forums.adobe.com/thread/427154?tstart=0. Here, I asked for a way to draw a line of fixed length under a header < h1 > (resolved) and a way to draw a line under a heading < h2 > where the line was shortened by an image inline (left or right header, as can be seen in the example of the ecstechnics.com site).

  The problem however is not yet solved for an image on the LEFT of the header. With the above solution and a fixed width line, this line is inspired right through the image to the left.

  I need a solution for a header that is positioned to the right of the image (which I'm floating on the left) and where I want the line to start under the first letter of the heading and extends to the border of the container.

  Thanks for the tips.

  Erik

  From time to time, this is the best approach (question to rephrase in a new thread). But give the existing question some time for people to see. A few hours on a weekend is not generally enough time.

  I did that cause confusion. My apologies, it won't happen.

  Cool. It was kind of fun playing Hunt the answers in the nets - this time only! ;-)

  I hope that this is the method of work (one that we it was).

  --
  Mark A. Boyd
  Keep-on-Learnine :-)

• Is it possible to sort the images by file name?

  I imported a record of 200 images in Photos for OS X (El Captain). Image files have been appointed in the order - I want them to appear in a slide show: photo_01, photo_02 etc...

  Once I imported the images - I found them all out of order - and the only options I can find in the view menu are somehow 'oldest first', 'newest first' or ' title '. Please, someone tell me I'm missing something obvious - he and not that Apple chose to omit the possibility to sort the images by name? If this is the case - I'm speechless - how is f - ing stupid!

  Sort by file name is not an option in the Photos. Albums and smart albums you yourself set can be sorted by name, date of capture, or manually.

  Sorting through the predefined albums is automatic:

  • 'Photos' display with moments and collections is sorted by date of capture and the location.
  • 'All the Photos' display is sorted by the date of the import session.
  • Other built-in smart albums are sorted by the date of capture.

  You can see the current sort order, preset, if it is grayed out in the "view > sort ' menu.

  As a workaround:

  1. If you need to want pictures to be sorted by file name, copy the name of the file in the title field. Then, create a smart album of the items and sort by title. We have posted a trick to copy the name of the file in the title field for the selected photos: Script: change the title filename without Extensionor: Script: batch change the titles of the Extension/w
  2. Or view your photo library in pictures of power.  This versatile tool lets you browse photos as a list or thumbnail while looking the other metadata under the thumbnails or displayed as list with columns selected and sorted by columns.

  You can do a lot with the free trial: download PowerPhotos here: Fat Cat Software-PowerPhotos

• Update to iOS 10 stops to record the Image of emails

  After the upgrade to iOS 10, I can to is no longer tap and hold on an image received and displayed within an e-mail message to save the Image from my camera in a context menu. Instead, it seems to only be able to save the text of the URL associated with the image. Ditto for images of websites in Safari.

  Here's how 'save image' is done 10 IOS:

  • Tap and hold the photo (or video)
  • Press "Quick Look".
  • Tap upward facing arrow coming out of the box (lower-left)
  • Press 'Save Image'.

  http://help.Apple.com/iPhone/10/#/iph845853585

• replace the image number

  is it possible to remove the camera given the number of image and replace it (in a change of badge) with a personal number (is it possible in Aperture)?

  No - you can add a title that can be displayed below the image

  LN

• When I click on "Copy picture", when I use the dough, it's to show the image URL

  Hello

  I'm having a problem about the exemplary Image resource. I need to copy and paste a lot of images to work.

  I click on an image, holding control and then press "copy picture". But when I paste, it shows the URL of the image and not the image. I tried on different browsers and apps, but the same error occurs.

  Can someone help me please? How should I do? It has changed from one day to the other.

  Thank you

  It looks like you use context Menus to copy your images. Depending on your machine or software, each user will have different contextual shortcuts.

  You might do better to use an application like SnapnDrag, which is free in its basic mode.

• How can I get the images to display in order of filename on my iPad?

  I have about 800 images I use in teaching Kinesiology, and their file names provide the structure (they are named by the chapter number then the image).  How can I get to display in order of file name in 'photos' on my iPad?

  Second, how can I check the file name while I look at the pictures (so I can see where I am in the bridge of 800 and also inform students what image I'm referencing)?

  Thank you!

  I'm sorry but there is no way to do this. The iOS system is currently not able. This article can help explain how iOS displays images.  Order of Photos in iOS

  The only alternative would be to create an Album in the Photos App (you can rearrange manually) or use a 3rd party App. None Displays the names of files. You may need a MacBook to do what you want.

• I have a HUD following my cursor with info on the image. How can I get rid of him?

  One of my Mac Pro, there's a HUD display with information about the image. It sticks to my cursor, and making it difficult to work. I'm sure there must be a command to stop this, but I'm not. I have another Mac Pro at work, and he does not. Any help would be appreciated.

  It's probably the Tooltip Metadata.

  You switch on and off with the key combination command-T or the browser and menu overlay metadata visualization:

  

• Can Thunderbird offer the possibility of images slect, via the thumbnail option, the selection of the images into the body of the email?

  • • Thunderbird v.38.4.0 *.

  Not sure if the title makes sense, but I'm trying to find out if there is an option for Thunderbird display images as thumbnails, when you search for an image to be inserted into the body of an email? In other words, is possible that I can see what the images are, through Browse, before I "insert" in the body of the email. IE: thumbnails?

  Usually, it would be somewhere in the display options, where you can choose the size of icons, but the look on things, I don't think there are a thumbnails option, but I wanted to confirm this.

  If this isn't the case, it is a great option for future generations. It just makes so much more easier if embed you images, rather than tie them.

  Kind regards
  b1rd

  It shows the photos here for large or medium-sized icons, win 10. Open File Explorer and look at the display settings under Options files (see photo).