When I click on "Copy picture", when I use the dough, it's to show the image URL

Similar Questions

• Distorted image when you use the images of Sony RX100M3 DNG Converter?

  My PSE11 can't import my RAW images from my Sony RX100M3.

  Instead of upgrading to PSE13, I converted an image using the DNG Converter.

  I then compared the image converted with the original ARW file in ACDSee Mac Pro and they appeared in fact differently, it seems that the DNG file contains a larger visible area than the ARW file and when switching between the two, the picture changes in proportions seems distorted.

  Really weird!

  When discussed briefly with MichelBParis in another discussion, he thought that "the reason is probably how the converter takes into account the profile of your target when the correction of distortion barrel or pad.

  Anyone who knows why this is happening and what can be done to correct, if it is not? If ACDSee Pro Mac picture shows ARW incorrectly?

  I will continue using the converter to change my images in PSE11 or will I go to PSE13 or the result will be the same in PSE13?

  Grateful for any input.

  The Sony RX100M3 has integrated lens corrections that should use photoshop elements 11.

  Have you tried to open the dng file in PES 11 Editor to see what it looks like in camera raw?

• Why Lightroom will not save the file when you use the image Capture?

  When you work with video in Lightroom 5, whenever I press "Image Capture", I get an error message that says: "cannot save the file." I tried this on several video files, and I get the same message. Video files are. MOV files. I can't understand why this is happening!

  I had this same error message. I solved it when I moved the video file on the hard disk internal to the computer, and then it worked perfectly. He always gave the error message when I used an external video file from my hard drive. There for a long time until I tried this. No one answered this problem in forums that I could find.

  I hope this helps.

• When I use the printer icon in Firefox, it is pre-set to 10 copies. How can I change this default single copy. Thanks for any information

  When I use the printer, in the upper left corner icon, it is automatically preset to 10 copies. I want only default copy. I can change it to one, but when opened, he's back to 10.

  Number of copies to print is not a parameter that Firefox is supposed to be saving, and I've never seen a preference for this in Firefox preferences panel hidden - about: config.

  Try of the reset described here and reset all the preferences for this printer:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer
  Be sure to restart Firefox before you see if doing this reset solved your problem.

  If it solves your problem, please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

  If that does not solve your problem, and defaults to always print 10 copies of everything through Firefox, please open help > troubleshooting... information and use the copy to the Clipboard and then paste this information into the box post an answer here.

  It's going to be a real long list, but all that I really need to see is the printing preferences, so you could paste all the information in a program such as WordPad text first, change the information that I can't see and then copy the remaining information and Paste only the information in the box to answer here.

  I wonder if there might be a pref I've ever seen, but I really doubt it. "Number of copies to print" has never been "stuck" for me on any program in Windows, on any PC I've ever used with any printer / print drivers.

  The only time I've ever seen a default "print dialog box" more than 1 copy has been with a working application where the program has been to force 2 copies of specific forms to print 2 copies all the time--one to give to the "subscribed" at the end of employment for their documents to the service call and one for the 'employee' obtain a signature at the end of employment with a fax in the Home Office for documentation of the task as completed successfully and for the purposes of the payroll while they would have paid for this service call.

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• When I click to share a folder by using the OneDrive site, no longer has the ability to set the folder to the public

  When I click to share a folder by using the OneDrive site, no longer has the ability to set the folder to the public

  It was clearly wrong because she's always there and I took a picture of him. :)

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• I just installed lihtroom CC and develop, the picture is blue. When I used the front then the image before is normal and blue again after.

  I just installed lihtroom CC and to develop the module, the picture is blue. When I used the front after, the before image is normal and the after looks always blue.

  I don't know what to do?

  See link below:

  https://forums.Adobe.com/thread/1823307

  6 Lightroom displays a blank blue screen with an X through it in the module development for all my photos

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• I'm under 11 items on Windows 8.  When I use the healing tool, the entire picture moves with the cursor.  How can I fix it?  Thank you!

  I'm under 11 items on Windows 8.  When I use the healing tool, the entire picture moves with the cursor.  How can I fix it?  Thank you!

  Worked like a charm.  Can't thank you enough, R Kelly!

  Ken

• When I use the left arrow FF tends to go back two screens instead of one. Also when I close a tab (Web page or e-mail) FF and TB sometimes both minimize

  When I use the left arrow FF tends to go back two screens instead of one.
  Sometimes when I create a new tab it opens two instead of one.
  Also when I close a tab (Web page or e-mail) FF and TB sometimes both minimize
  When I opened a project in Tbird, if I close it, the set of Tbird farm.
  When I create a copy of the project and save to drafts, when I recover, there many other added characters generally upper and lower case or some other character.
  Both applications are up to date.versions 38.0.5 & 31.7.0
  Help!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also try another mouse in case there is a problem with your current mouse and check the double-click setting in the mouse driver software.

• The file size of Photos library don't to shrink when I remove the images from the library

  Subject line pretty much sums up it.  Let's say I have create a library of Photos and import of 100 photos. The file "Library.photoslibrary Photos" grows to a certain size, as expected. But if I remove some of these pictures does not take the size of the file photoslibrary. If I import images more library file grows again, but it never reduces when I delete the images from the library. This happens with both a library of referenced files and images copied to the library.

  What happens here?

  You must either wait 30 days or go to the recently deleted album and remove not for the final to do deletion

  and note that Photos doesn't manage referenced good libraries, it was reported here that they can use more space than a managed library and they are not recommended

  LN

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.