Hyperlink button doesn't work is not a Drag and Drop Interaction

Similar Questions

• Why is it not my Drag and Drop let me it slide?

  Hello

  I created an interaction drag-and - déposer in CP8. I have about 40 seconds of audio before I want the interaction drag and drop to become active, so my drag source and targets are hidden for 40 seconds. I have D & D put on pause after 42 seconds.

  When I saw my slide, it doesn't allows me to drag my source at all. In fact, the only time wherever it allows me to do it, is if I put the source and the target is displayed at the beginning of the slide.

  I have to create two slides? To play the audio and then automatically move to a second slide with the D & D just to this topic?

  Thank you

  Kristen

  It's one of the problems with drag & drop: objects must be programmed at the beginning of the slide.  If this is not possible, as I already had the requirement in many projects, you need to split into two blades.

• Captivate 8 drag and drop interaction does not

  Hi, I work with 8 Captivate and created an interaction drag-and - drop using the wizard to drag / move. For some reason when I preview the interaction some of my sources of drag and others are not. I searched high and low for what I can hurt, but I can not understand. I created types when doing the interaction so it is not sensible that some should work and others don't. Thanks for any help you can provide.

  Hi Vaneppmc1,

  You have disabled the option accept all of the dialog "drag accepted Source. (as seen from your capture screen images).

  If the option "accept all the" is checked, the target can accept 'ALL' sources who are ticked in the column 'Drag Source Types '. In your case, Image 9 can accept sources of type "Bad conscience".

  Since you have unchecked the option accept everything, and the value of Count is 1 (which is default). Here so the target can accept only 1 source of type "Healthy Conscience of the United Nations" and lift reject legend of error on the acceptance of another source.

  Check the option "accept all the ' try and let me know if this works for you.

  If this does not solve your problem please share your Cptx file to address the issue by e-mail ([email protected]).

  Thank you

  Derrick

• Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!

  Please help if you can. I'm going crazy trying to solve this problem.

  Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put back in operation or stop my system... only put into hibernation.

  I have done research on corrections and tried several unsuccessful. My last hope was to run the "clean boot" for windows 7, I did, but in the end when it should have restarted I got an error box that says "the System Configuration cannot restart the computer.

  What can I do? I think that my system does not work properly because it has not been restarted because all updates have been loaded. Is there a solution?

  Thanks in advance!

  Hi Kristi,

  Have you tried to do a hard shutdown and restart the computer?

  If you have not done a hard reboot by manually turning off the power button on CPU, I suggest you to try and see if the problem still occurs.

  If you still experience the problem, then follow these methods:

  Method 1:

  Check out the link and run the Troubleshooter:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem is not resolved, I suggest you refer to the article and change what happens when you press the power button on your computer:

  http://Windows.Microsoft.com/en-in/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Let us know the results.

• Action button doesn't work does not correctly

  I have a site that suddenly decided to not work when someone clicks on drop the tab. The three main pages are loaded as being of the same scene, and the other two work, but not on the page. Any ideas?
  
  

  I thought about it. Looks like sort of a film has been removed from the scene 1

• The home of the iphone 5 s screen button doesn't work does not correctly

  Home screen (middle button) does not work smoothly. Sometimes, it works very well and sometimes it doesn't. Someone might suggest it is a hardware or software problem that must do to solve this problem

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  Also updated software iOS 10.1 over your WiFi

  See you soon

  Brian

• Back to Firefox button doesn't work does not correctly when you navigate to the new Site

  When I open a page to a new site that I can navigate forward and backward on this site very much, but whenever I try to leave this site via the back button it shows as if there are no pages beyond this site, like the opening of fresh on this site page. This is driving me crazy so if someone could help this type of person not techno I would be eternally grateful.

  Yes, how the code page tab, you cannot return to the new tab Firefox's built-in page or a page that you want to substitute for it.

  Since this is your home page, you can use the usual methods to return to your home page:

  • Click on the home button in the toolbar
  • Press Alt + home keyboard

  Or you could try a different extension for the new tab page see if that solves it. For example:

  https://addons.Mozilla.org/firefox/addon/custom-new-tab/

  After installing, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the right side, find Custom new tab and click on the Options button.

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See attached screenshot).

  I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Any improvement?

• "Home" button doesn't work is not even with the support contact

  H

  Hello to you all.

  I seem to have a problem with my iPhone 5 now. Notifications are not appearing (stills phone vibrate, silent or not), siro does not work (but again, vibration works as if everything was fine.) and by simple click home button does not work, both manually and with a help key. Double-click on works fine, triple clicking too. I tried calibration "home" button but it does not work, and since he made double and triple click, I don't think it's broken. The thing is, even touch home on assistove does nothing. Please help me find a solution thanks!

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If restarting the force cannot be done because the home button does not react, set it back to factory settings, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Press the scroll button doesn't work is not in windows 7

  My laptop is hp Pavilion dv4-1428 and I moved from Vista to Windows 7 last week, but the audio and scrolling on the touchpad do not work. All solutions would be very appreciated.  Thank you

  Sorry for replying so late...

  I did not now how, but I did not notice that.

  A

  Touchpad:

  Uninstall the Synaptics driver given by me, that is not for you model. (If you have other drivers for this device uninstall them too).

  Resources:

  Uninstall or change a program in Windows 7

  Install this driver:

  ALPS Touchpad worm 7.5.1711.118 has for Win7 here

  B

  Audio:

  If it has been upgraded, then uninstall your old audio driver.

  Resources:

  Uninstall or change a program in Windows 7

  If you have installed an audio driver via Windows Update, then go to

  Control Panel-> devices Manager-> sound, video and game controllers

  Find here the IDT. Click with the right button of your mouse and choose uninstall the driver.

  When you make this install this driver:

  IDT sound here for Win7 by HP

• ThinkVantage button doesn't work is not started

  Hello

  I bought a couple of seconds for the W520 hand that accompanies Windows 10.

  LN two machines you cannot interrupt the start-up with the blue zThinkvantage button.

  Research I've done seems to point to this remap after Windows is loaded, which does not at all help.

  Any ideas?

  Thank you

  The Thinkvantage button should launch recovery for the W520 menu. None of these tools of Windows 7 will work on Windows 10 and there is no possibility of mapping of the key in something similar. The W520 is also not on the official list of Lenovo for Windows 10 support either.

  You can always hit F1 to enter BIOS and configuration during the boot sequence screen.

• right shoulder button doesn't work is not on the gamepad xbox on pc XP

  Hello
  I have a joystick type xbox 360 connected to my pc and the right shoulder button does not work when you play Rainbow 6 Vegas 2.  Initially it would not work so I changed the ID & as recommended numbers on a forum, I visited. Now, all controls work except the right shoulder button. The file that I modified is shown below.  Any help much appreciated.
  concerning
  Pete

  [Joystick2]
  ProductName = gamepad Xbox HID minidriver
  VendorID = 5168
  ProductID = 63489
  Joy1 = XboxTypeS_A
  Joy2 = XboxTypeS_B
  Joy3 = XboxTypeS_X
  Joy4 = XboxTypeS_Y
  Joy5 = XboxTypeS_RightShoulder
  Joy6 = XboxTypeS_LeftShoulder
  Joy7 = XboxTypeS_Start
  Joy8 = XboxTypeS_Back
  Joy9 = XboxTypeS_LeftThumbstick
  Joy10 = XboxTypeS_RightThumbstick
  Joy11 =
  Joy12 =
  Joy13 =
  Joy14 =
  Joy15 =
  Joy16 =
  Axis_X = XboxTypeS_LeftX
  Axis_Y = XboxTypeS_LeftY
  Axis_Z = XboxTypeS_LeftTrigger
  Axis_Rotation_X = XboxTypeS_RightX
  Axis_Rotation_Y = XboxTypeS_RightY
  Axis_Rotation_Z = XboxTypeS_RightTrigger
  Slider_0 =
  Slider_1 =
  DPadUp = XboxTypeS_DPad_Up
  DPadDown = XboxTypeS_DPad_Down
  DPadLeft = XboxTypeS_DPad_Left
  DPadRight = XboxTypeS_DPad_Right

  Hello

  The question you have posted is related to the Xbox 360 controller.  Please visit the link below to find a community that will offer in support of your application.

  XBOX support:
  http://support.Xbox.com/en-us/Xbox-360/get-started/home?XR=shellnav

  Reference: http://support.Xbox.com/en-us/Xbox-360/accessories/controllers-remotes#1af1420135ff4637ab4f495f75a145b8

  Hope this information is useful.

• Laptop HP 15-r022tx - Wifi Button doesn't work is not (Bluetooth too)

  Hello team,

  HP 15 - r022tx Notebook PC button wifi of this model does not work. so I can't connect to internet via wifi.

  Is there any particular wifi driver to install?

  My Version of the OS: Win 7 32 bit

  Note: The Wifi button continues to blink with orange led light. So am confused if the wifi is on or not. I installed most of the drivers of hp.

  Please update this question.

  See if this driver Intel graphics works rather... old version...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714&lang=eng&ProdId=3719

  If the Intel driver works, you should then be able to install the nvidia driver.

  Try an earlier version of the driver ralink wireless card...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Left mouse button doesn't work is not on my laptop

  My left button of the mouse is suddenly no longer works on my laptop. Instead of the function of click, she appeared a little icon of 2 triangles with a dot in the Middle, and they were in the circle.  Instead of click, it scrolls vertically on the page.  Now, it does nothing when I click on the left button of the mouse.

  I checked my settings of the mouse and the left button is set to "Click" according to its function, not scroll or anything else. I just started this suddenly, doing without all the parameters being modified.

  Can someone please? It's driving me crazy. Thank you very much!

  PS - I have a Toshiba, but I think this is not the laptop, it's Vista (?)  Also, I have not installed anything recently, etc..

  Hello

  Try the system restore before that happened:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  ================================================

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See Toshiba and Forums Support.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Check with the manufacturer of system support, documentation in line, and/or forums he has probably shortened that
  enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Brightness button doesn't work is not on my Hp laptop

  I have laptop Hp Pavilion 2000, on which when I press f2, f3 in brightness increease or decrease, id does'nt do. inface all other keys work fine, but when I press it, the BRIGHTNESS bar on the screen, but newither it increases or decreases. Please tell me what went wrong.

  Please turn off the laptop

  Disconnect the power/AC adapter and also remove the battery too

  Press and hold the power button on the laptop for a minute

  Now re - insert the battery back in and plug again the power supply/adapter

  Start Notepad and try to adjust the BRIGHTNESS again

  Note: Incase if you still have the same problem, please press on and hold the Fn + F2 or F3 keys + Fn

  to increase or decrease the brightness

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• the 'new folder' button doesn't work is not on the documents or images.

  The "new folder" documents or pictures button does not work. When I press nothing happens.   Used to work, but no more.

  Only change I made is that I now use Chrome instead of IE. How can I fix it?

  It's looking like a recent update of chromium may be the cause. Here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.