Hypervisor ESXi and vSphere?

Similar Questions

• Differences between ESXi and Vsphere hipervisor

  Hi guys,.

  I need to understand the difference between ESXI and Vsphere hipervisor.

  Is it correct to say that Vsphere ESX?

  Help will be very useful.

  Thank you very much

  vSphere is the range of products, including (hypervisor) ESX, vCenter (management) etc.

  In comparison, you asked "Is this correct to say that a shoe laces"?  No, not really.  One is a part of the whole.

• ESXI and vSphere Client

  Hello

  In my box a summer ESXI Server Installer a long time ago. En now it is 4.0 and the vSphere client for access 4.0 also but its evaluation period is complete.

  What do you recommend me to do?

  Did you well requested a license pour ESXi 4?

  http://www.VMware.com/go/get-ESXi-4

  Eric

• ESXi and vSphere support on older hardware?

  I have freelance consulting work.  I often need a VMware platform for the work I do.  For the most part, I've been running on desktop on my laptop.  That works well for some things, but for other things, I really need ESXi.

  Being a small shop with a budget of small equipment, I'm looking for a low cost solution.  I found an old HP DL380 G4 for a very reasonable price.  It is not a big box, but it would do well for my needs.

  My question: how long is this likely to be taken platform supported in ESXi/vSphere?  No reason to expect to stop working anytime soon, or should I expect to work "forever"?

  Thank you!

  I have a few old DL360 G4 models in my test environment, and they certainly VT support. A glance on the Intel site shows that without VT - x support (http://ark.intel.com/products/27089/64-bit-Intel-Xeon-Processor-3_60E-GHz-2M-Cache-800-MHz-FSB) XEON Processors

  See also the Quickspect from HP for more details on the DL380 G4 to http://h18000.www1.hp.com/products/quickspecs/12028_div/12028_div.html and to http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html HP compatibility guide

  André

• Move VMS between server ESXi and vSphere ESX server

  Dear all,

  I want to move some a vSphere ESX server virtual machines to ESXi server.

  I understand that some users will use CPS to move between the ESX servers, but apparently not for moving between different products.

  I'm just using a slow and prone to error method:

  The files of the virtual machine to my deskop PC of vSphere ESX server and then upload to the ESXi server.

  I would advise you to please all of the methods that is better than this one?

  Help, please.

  Kind regards

  Tommy

  If you got a central storage you can move virtual machines between the two products with vMotion. Since you don't seem to have available vMotion, you pouvez use scp. SCP has nothing to do with ESX/ESXi products. It is a Linux/Unix program which is available in both servers.

  So with the CPS, you need a little less.

  The syntax is like:

  SCP - r/path/to/vm/directory user@esxi:/path/to/new/location

  Concerning

• How to correctly record the ESXi 4.0 and vSphere Client for free?

  Hello everyone.

  Can someone help me with registration

  of free VMware ESXi 4.0? I am totally confused with the process I

  certainly do not understand.

  My goal is to install and use ESXi

  4.0 and manage via vSphere client with free licenses free of charge for

  more than 60 dayes. Is it possible?

  Installation of its products

  gone without problems, but failed to save. I found a few

  suggestion on other threads, but nothing helped. Give me a hand please,

  I will be grateful.

  I'll write what I did:

  1. I went to the http://www.vmware.com/products/esxi/ site.

  2. I read that I can get the free license for VMware ESXi 4 and VMware vSphere Client.

  3. Decided to download this software, registered and was redirected to
     the site where I could download iso 4 ESXi and vSphere Client .exe

  4. Installation and basic configuration of ESXi on the bare metal and vSphere Client Windows XP without problems.

  5. I am able to create virtual machines and use it - it's OK, but vSphere Client know that I have to the 60-day trial.

  6. Meanwhile I received the email with "Activate your VMware ESXi license".

  7. I have
     Click on the link in the e-mail and was redirected to the same
     the site, where I can download the software, but on the top of the web page I can
     find information and a 'ESXI licenses""this license key is valid.
     "for VMware ESXi 3.5 Update 2 and later versions. So I guess it's also valid
     for ESXI 4.0. I'm I right?

  8. I would like to record my ESXi 4 software installed and the vSphere Client. Of
     I chose the vSphere Client Menu: help - & gt; VMware on the web - & gt;
     Sign up for now. The site ask me "series/license number Activation".
     Code"so I typed the license key. Iassume that this license key should not be placed here, because the web site of replay that: "Code of Activation of series/license number has already been registered. So how do?

  As I wrote, I'm confused. How to correctly record the ESXi 4.0 and vSphere Client? What I did wrong and how to fix?

  To register the serial number in your ESX4i host

  Home-> inventory-> higher level (your ESXi host)

  Tab Configuration

  Left side - features licensed

  Edit-> Assign new key for this host-> Enter Key

  Paste your key

  Confirm all

  Your ESXi server is now fully licensed

  Note: you no longer have the basic features and all the enterprise features that came with a trial license are no longer valid

  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• VMWare vSphere 4 hypervisor ESXi 4.1 - can buy upgrade to 4.1 Patch 11 again?

  Hi guys

  I have a x 3650 M2 aging IBM server running the free version of vSphere 4 Hypervisor ESXi 4.1.0 260247.

  I'm looking to install esxi version 4.1 Patch11.

  I have a few questions:
  1. I am able to patch to version 4.1 Patch11 without having to re - build the host and re - import the virtual machine?

  2. I am able to buy the paid version of the Patch11 4.1 so I can get the support of VMware? If so where can I buy it.

  3. Alternatively if I can't buy Patch11 4.1 can I buy VMware vSphere Essentials Kit 5.5 version and update without having to re - build the host and re - import the virtual machine on top of the 4.1? My server is about 4 years, I am worried if she composed with 5.5?

  Kind regards

  Aaron

  1. I am able to patch to version 4.1 Patch11 without having to re - build the host and re - import the virtual machine?

  Yes, but a backup is always recommended.

  2. I am able to buy the paid version of the Patch11 4.1 so I can get the support of VMware? If so where can I buy it.

  You can download it for free here: https://www.vmware.com/patchmgr/findPatch.portal

  3. Alternatively if I can't buy Patch11 4.1 can I buy VMware vSphere Essentials Kit 5.5 version and update without having to re - build the host and re - import the virtual machine on top of the 4.1? My server is about 4 years, I am worried if she composed with 5.5?

  According to VMware HCL, your x 3650 M2 IBM server is compatible with the latest version of ESXi:

  

  For procedures about how patch your host, check out this link: fastest way to patch an ESX/ESXi using the command line. VMware vSphere Blog - VMware Blogs

• How to clone a virtual machine using ESXi 4.1 and vSphere?

  Instructions for I have seen that you can click with the right button on a virtual machine and choose "Clone", but I think it's only for vCenter

  Is there a way to clone a virtual machine in vSphere?

  Thank you

  If you have a licensed copy of ESXi (not vSphere Hypervisor, the free version), you can try the document below.  However, if you do not have a licensed copy you vCenter for cloning function

  http://communities.VMware.com/docs/doc-11708

• 4 ESXi and VMware vSphere CLI

  Hello

  I can't start a discussion in the community CLI to I write here.

  When I try to use the CLI tools to manage a few shots on an ESXi 4 Server I get strange errors.

  CMD: snapshotmanager.pl - Server XXX.XXX.XXX. XXX - XXXXXX - nom_snapshot Test vmname - create operation

  Result:

  Fault:

  SOAP fault:

  -

  ---

  Error string: error. RestrictedVersion.summary

  Lack of details: RestrictedVersionFault

  The operation using 'list' works very well but not create or delete.

  No idea why it does not work for a 4.0 host but is ideal for a 3.5?

  The reason why it worked for you on ESXi 3.5 is probably the version you were using was U2 or U3 where the VI API has an internal bug that allowed two full read/write access, which allows you to perform operations such as switching to a virtual computer or take a snapshot. Go ESXi 3.5u4 +, which includes 4.0 moving forward, the API VI is read-only. Before more details please look here: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/

  You still have a few options, either unlock the console SSH not supported to automate snapshots using vimsh vim - cmd wrapper, using the VI Client or use VMware VIX and vmrun which currently is not governed by the VI API, take a look here for more information: is not happy with lockdown 3.5u4 VI API/RCLI ESXi? Worry not, VMware VIX to the rescue... for now =)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• STOR. ESXi and E BASICS

  I have this problem:
  We use servers that are virtualized with ESXi Hypervisor.
  And the Windows operating system uses the STOR. E BASICS 500 GB to backup their data.

  Now a hard drive of this type felt, the hard drive is about 1 year ago.
  So I want to swap the drive with one of the same only more recent type, but now ESXi does not realize it.

  In a Windows operating system, the drive works fine, but ESXi, I have a chance!
  Y at - it a new firmware or something differnet changed?

  Experiences?

  The STOR. E BASICS 500 GB 2.5 "is the USB3.0 external HARD disk.
  It s a device plug n - and - play, requiring no additional drivers.

  Toshiba says that this HARD drive works properly under Microsoft Windows XP/Vista / Windows® 7 8/Windows/Windows 8.1

  The HARD disk supports the USB3.0 standard, and this means that you must 900mA can get it recognised correctly.
  In the case where the drive HARD isn't recognized on USB 2.0, I recommend you to use a USB cable to Y which allows to connect the HARD drive to two USB 2.0 ports

• Want to take the certification VCP6-VTC, but I finished the 5.5 ESXi and vCenter Server 5.5

  Hello

  2 years ago I had the training for 5.5 ESXi and vCenter Server 5.5 - I wonder if that would satisfy the requirement and allows me to pass the exam VCP6-VTC?  Or should I stick with the VTC VCDP5 only?

  Have you taken after school.

  5.5 vSphere install, configure and manage.

  If so, please attend vSphere: what's new [5.5 to 6.0]

  It is a 2 day course that will allow you to take the exam VCP6-VTC.

  Otherwise, take VCP550 review and upgrade to VCP6-VTC in taking 2V0 - 621D.

  Pleaes see following URLs too.

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www_cert&TRK=profile_certification_title

  VCP6-VTC Certification

• Install ESXi/ESX/Vsphere on a single isolated standalone workstation

  In the hardware compatibility list, I noticed that the HP Z840 workstation is compatible with ESXi/ESX/Vsphere. In fact, the HP Z840 is the only HP computer that is not a server and still included in this list of compatibility.

  For the moment, I have a unique stand-alone HP Z820 workstation.

  If I decide to upgrade to a new computer HP Z840 independent, I will be able to install, configure and use ESXi/ESX/Vsphere on it and install top one, two or more systems of guest OS designed to run simultaneously, without having to connect this workstation Z840 even temporarily on another computer, separate console or network?

  There are two types of virtualization-

  1 bare Metal virtualization-

  ESXi is a virtualization software, have you install directly on the physical server from bare metal hardware. ESXi is very compact.

  Then to manage ESXi host and create the virtual machine on ESXi host, you need a system more to run vSphere Client or use client Host.

  ESXi directly access physical resources, which improve the performance of virtual machines.

  2 hosted virtualization-

  VMware workstation is a hosted type virtualization software, install you it on any system Windows or Linux and then create virtual machine on it.

  Windows underlying system provides material resources to virtual machines created in workstation that's why you get no good performance of the VM as compare to ESXi

  Today VMware workstation 12 perform as well, if you simply create VMS to test or purpose LAB VMware workstation will also work.

  For good performance, then you must ESXi host at least a Client system to manage ESXi and VMs.

  Thank you

  Hentzien

  Virtual Admin

• The traffic between a host ESXi and vCenter Server is secure?

  Dear team,

  You pray let me know is traffic between a host ESXi and vCenter server (vice versa) is secure?

  The VC and ESXi version is 5.1U1a

  concerning

  Mr. VMware

  Default SSL certificates are installed automatically. However, you can configure the third-party SSL certificates to make the environment more secure.

  Please see:

  VSphere Documentation Centre

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Security-Guide.PDF

• ESXi and local RAID 1 - do not know if it works

  I have setup a RAID 1 (2 discs) on my box of ESXi. Now I loaded ESXi and registered in with the vSphere client. In "The memory", is to show both of these drives. Should it only showing a?

  

  I thought that ESXi should see 'one' in the car for me to put on.and data warehouses, then the RAID controller would just reflect. But when I try to create a data store, it allows me to opt for the second time either of these discs on first, then the other drive. Is this job right? This doesn't seem to be just if I can just add warehouses of data on each disk individually.

  which means that you are not using the controller RAID HRDWARE and using your software RAID. in esxi software RAID is not supported

• a few questions about ESXi and SAN CF with HP P2000 G3

  Hello everyone!

  I am new to ESXi and SAN, then I need help for her.

  I have Encolosure C7000 system with 4 blades BL460c already installed ESXi 5.1U1 (HP custome ISO image). Everything works fine now, but I do not understand something:

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  My devices:

  01 7.1 HP BLc7000 CTO 3 IN LCD ROHS Encl.

  04 BL460c G8 servers HP FlexFabric 8.5 10 Gb 2 p 554FLB FIO blade adapter

  02 7.3 HP B-series 8/12 c BladeSystem SAN Switch

  01 HP P2000 G3 MSA FC Dual Controller

  Thanks for any help, sugession or comment!

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  Yes, it's a separate network used only for traffic management between ESXi hosts and vCenter - it is also the network used to connect to the environment - that's different, then the network used by your virtual machines

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  Yes the license keys can be reused, and if you use vCenter licenses will be managed by vCenter

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  Yes, you will be able to configure the San later - by default, the virtual machine will not see the SAn, as it is virtualized by your ESXi host - all the VM will see is a virtual SCSi disk - this doc's guide to vmware for storage - http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-511-storage-guide.pdf - you can visit the website of HP they might have documentation on configuring P2000 for vSphere -.