Qosmio E10 and TV-out via D-video COMPONENT

Similar Questions

• Qosmio G20-139: need to buy D-video component cable or scart

  Hi I'm trying to find a D-video/component or scart cable (like a lost mine)... for my qosmio G20-139... can't find anywhere in the United Kingdom... sent Toshiba but no answer! .. found loads of DVI - D video cable, but don't think it's the right cable... any help pleaseeeeeeee... as I am not Expert!

  Hello

  Please contact one of the partners of service authorized in the United Kingdom. They can order one for you. Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads search for an ASP.

  Good luck!

• Qosmio F10 and TV connection via SCART?

  I try to display on television. using the output S-video of my Qosmio F10 I have no problem. However my TV S-video entry is at the front behind the door of some panels, so it is much more convenient to use one of the inputs SCART on the back of my TV.

  I've never had problems with one of these entries SCART (it worked perfectly with VCRs, DVDplayers), but now everything I try I can't get it to work with the cable SCART provided with the Qosmio.

  How is it? is there a way I can test it there is a signal on the output in the cable SCART on my Qosmio?

  Hello

  If you want to send the signal to the TV using the SCART, you can use adapter SCART (In/Out). Google a bit and I'm sure you can find the best solution.

  You can also get the best information in some electronics stores. There you can get appropriate technical advice.

• critical issues with my qosmio E10

  Hello, I just purchased a Qosmio E10, and I must say that I am facing many questions. It is first of all, the second machine I got because the first machine, I had to bring back for the following reasons:
  InterVideo Windvd did not work properly especially in fullscreen and second and probably more important the computer crashes permanently. To bring back to life, I had to turn off and on again. Therefore, I went back to the store and they replace it with a new machine.
  However, the new machine again the same problem. Work of interVideo Windvd don t fullscreen and it freeze again.
  It's very annoying. Now the question is:
  Qosmio E10 is defective or I'm the contrary to one who knows the same problem in two different machines?
  The only thing that happens in my opinion, is that as I install Norton Systemworks 2005 computers, maybe it is in conflict with this type of laptop, that might have some meaning. However, it seems very strange that I have the same software in my other Toshiba satellite and it works properly. Now before I'm going to complain to the shop to ask my money back, can someone from this forum help me with a reasonable response that could convince me to keep this machine?
  Thank you very much and sorry for the long message.
  [email protected]

  Hi Gerry

  I guess you're a little irritated, but I think there is no reason for this. Gerry, you bought very nice laptop and I envy you. :)

  As far as I know that all laptops are tested before they're sold. It will be very interesting to know that you have all of these problems at the beginning or after the installation of Norton Systemworks 2005. It is very possible that there are some conflicts, because there are a few options analysis of PC and PC. I installed a similar app on my Satellite P10. There is no change, but I think my phone works now more slow.

  Qosmio is portable dessu and I am sure that there is no reason for any improvement.

  Before you change your notebook to test completely free applications for the optimization of the system.

  In my opinion, you should keep this machine and enjoy all the multimedia functions that you have on it.

  Good bye

• I need the disk recovery for the Qosmio E10

  Hello.. I wonder if someone can make me a copy of the diskette of recovery for the qosmio e10, and what I will use to get the best tv signal? see you soon

  Hello

  Michael's right. You can order the CD from recovery with the Toshiba service partner. I m sure this CD is not very expensive.

  Good bye

• Qosmio G30: black and white photo via the S-video input

  Hello

  I have a Qosmio G30 Win XP MCE running. I'm watching the TV from my digi via S-video sky box in the port within the media library. The problem is that the picture is black and white and not very good (lots of interlacing artifacts).

  I checked the driver for the 'TOSHIBA PCI DVB-T/Analog Tuner hybrid' and I am running the latest version of Toshiba, I also checked the output settings on my Sky box digi, which are correct. Is there a resolution?

  Thank you.

  Have you noticed the same result with Qosmioplayer and MCE?

• Qosmio G40 and S-Video input

  Hello my friends,.

  I have a problem here: (...)

  What I want is simple, in theory. I have a VHS VCR, I have a few bands I want to convert it to DVD. I noticed that G40 has a S-Video In, so what I did, buy a cable that is SCART on one side and the other is S-video, I plugged the VCR to the G40, supported to the play in the VCR button, Ulead factory began to Toshiba, but nothing happens, I can not save anything, even to get a picture... the problem is not the cable because I connected the VCR to the TV , the same way (with the same cable) and it shows fine.

  Does anyone have an idea how to do that? I'm really desperate, I searched Foruns and googlled it but could not get a response.

  Kind regards
  Ricardo Monteiro

  Ricardo is not a solution for you. The cable using S-video can only be used for the transfer of video signal.
  Do you have the picture without sound. I don't think so.

  I had similar experiences and I copied the old VHS tapes to my old Qosmio G30. Later, I converted the recorded material and created DVDs.
  My Qosmio G30 has antenna at the port and I plugged my VCR VHS to this port and transfer of video and audio signals. For example I started video on VHS VCR and started Windows media Center and scanned the channels and on channel 33, I saw my recorded material that comes from connected VCR VHS.

  I tried recording with Qosmioplayer and MCE. Using the two options, I was able to use the record option and have video content on the HARD drive.

  I don't know that the same thing can be done with G40. Check it out.

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• Why Apple photo app has no option to rotate a recorded video? This is a big disadvantage and watch out!

  Why Apple photo app has no option to rotate a recorded video? This is a big disadvantage and watch out!

  I use Iphone 6 version 9.3

  You hear " Apple photo app is not an option to rotate a recorded video?"

  We shouldn't speculate on the motives of Apple in these forums.

  Send a feature request to Apple: Apple - Photos - comments

  As a work around using QuickTime on your Mac to rotate the video or iMovie.

• Qosmio E10 is slow and HARD drive makes noise constantly

  Hi people

  I also have a toshiba qosmio e10 notebook. I had problems with it as well lately.

  First it started with a slow start, and then at some point I started having error messeges.
  When I called the toshiba Helpline advises him to do a check disk. I did this and the problem is still involved.

  Now also the hard drive constantly makes noise, but once the computer was successfully loaded its usually very well, it's just starting. A similar thing experience?
  What is the best thing to do?

  I'm thinking of replacin the hard drive.
  Any help will be appreciated. thanx

  Hello

  The check disk (HARD drive) will not solve all problems, but this tool report some errors and problems with the HARD disk.
  You sounds description as a HARD disk failure.
  Maybe it's a beginning of the end of s.

  Several months ago I noticed something similar on my laptop.
  Two days after my 3 years old HDD was dead. It was just a head crash.

  Take my advice and backup of your data

• Drivers Win XP Pro and install a command of Qosmio E10

  Hello
  I recently bought Qosmio E10 in Korea. The OS is Korean Win XP Home. I would like to change, so I guess I have two options:
  1. get a restore in English CD. But I read that Toshiba has the strange rule do not give the CD of restoration of another language. I wrote to them, they answer for now.
  2 install Win XP Pro myself (I have only this license). In this case, the question should be able to get all the drivers I need. I found good drivers in several places:
  On http://www.toshiba.co.kr, but I worry that these drivers are for Korean XP.
  The other place is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  In this place, most of the drivers is for Media Center Edition. There are drivers for XP Pro, but they are not so many and there is no order of installation. There is for example, no NVidia driver, this driver is available for the media center. Maybe I can use Media center drivers on XP Pro?

  So my question is: do I have to use drivers and and what order to get a good working XP Pro. It would be good to know where to download QosmioUI. I found the Linux player and I install it, but I also want to have the drive in Windows.

  Hello

  As far as I know that the software is delivered on laptop and if you buy a laptop, you automatically buy OS and license for use. This means that you can not order a DVD of recovery on another language. Qosmio E10 comes with Windows MCE2004 SP1a.

  The only possibility is to install the Microsoft Windows XP (full version, with or without MCE) operating system, and then install all the necessary drivers, tools and utilities separately.

  For the English language you can find them on http://eu.computers.toshiba-europe.com topic support & downloads.

  Good bye

• I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

  I installed a USB device to a radio control. I have a total control but fail to activate the audio in and out via the USB port. The device does not appear on audio routing options (left click on the logo of the speaker), any ideas please?

  Tim, first read the whole message!

  (This after below is complete) Remove all usb drivers and charging system leave, after reboot, make sure that the item in question is connected before the reboot.

  Follow the steps 1, 2 and 3 below.

  1: make sure you use Win7 SP1 and all updates are current and responsible.

  2: after insurance above, go to Device Manager and remove all THE USB drivers. Don't worry, it will reload.

  3: reboot then System Device Manager will research and required load all the drivers.

  He must find all the items. If it does not investigate that in question is Win7 really compatible, 100%.

  If 100% Compat. with Windows7 should find!

  (Also make sure that the automatic Windows upgrade and install is enabled for software and hardware drivers)

• Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a file instead of .mp4 .m4v

  With the help of the first Pro CC 2014.

  Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a .m4v instead of .mp4 file.

  Anyone know why audio and video export separately? I can't understand why. Help is very appreciated.

  Are you sure that you choose a preset of Blu - ray? This will create separate assets. Thanks for posting a screenshot of your export settings if you can - which is usually much enough quickly

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Information about the latest drivers for Qosmio E10 / F10 / G10

  Hey all, I don't know if a used Toshiba computer support on the European site of bed this thread, but I hope of course.

  Well it turns out that a little Japanese knowledge so I decided to go to the Toshiba Japan website, in the download section of pilot, and I was a bit shocked ^_^

  For my Qosmio E10, I realized that most of the downloads from the European websites of Toshiba are outdated.

  -There is a new version of the bios 1.70 (which improves stability with Intel chipset AFAIK) instead of on the site of the Euro 1.60. [I didn't try it because my machine is a French]

  -New Nvidia video drivers! 57,82 versus 57,79 on the site of the Euro. [I tried and there are new presets for PC games]

  -New driver tuner TV 1.0.2.6 versus 1.0.2.0 on the site of the Euro.
  [I tried and what a TOTALLY SOLVED MY TV PROBLEMS CHECK, I can finally save all: PAL, SECAM & NTSC without huge flicker that plagued the 1.0.2.0 version]

  -Toshiba offers 'Toshiba Virtual Sound' for owners of the E10 to the Japan. (in Europe, we still have the "Windows Media player SRS WOW" plugin) [I tried and it is a fantastic software, improvement of the sound is great with great presets, you won't believe what you get for your Harman/Kardon after installation of this!]
  It has the great advantage of working for all the Windows programs, not only in WMP as the fact the plugin 'SRS WOW' we have in Europe.

  As you can see there are a lot of new drivers that we, owners of European Qosmio, would really benefit.

  But there's something interesting that you should know about:
  Drivers Toshiba E10 euro site are also outdate compared to other Qosmio models pilots from the Euro site!
  For example:
  -The pilot of his "Soundmax", is a version of 3890 in section E10 and 5160 in the section of the G20!
  It's exactly the same chipset, so it is of course compatible and should also be in the section of the E10.

  -L'Intel LAN driver "INtel PRO 100 VE" is version 7.1 in the section of the E10 and 8.0 in the section of the G20.

  -L' utility development of photo is the version 2.4.0.0 for E10 and 2.7.0.2 for the G20.
  P.E.U. is a key point for Qosmio because he is directly responsible for the quality of image engine Qosmio!)

  I think it's a hassle to go to the other models Qosmio download section to find the latest drivers for our machines.
  Qosmio E10 is a year old and is a fantastic (and expensive ^^) piece of hardware, Toshiba please, update the drivers at the latest as soon as you can.

  It's about the E10, but if you have a F10, G10, I'm sure you can do the same thing as me and go see the download section of the F20, G20, etc... and you will find the latest drivers and downloads for your machine!

  As for now, I really hope that Toshiba would be the BIOS for EURO Qosmio E10 1.70. (For Japanese E10, it is located here: http://dynabook.com/assistpc/download/modify/bsqse102/index_j.htm?qry=.%2F%3Ffunc%3Dpi%26category%3D1310 20% 26keyword % 3Dqosmio % 26cpg %3 D 50% 26session %3 D 027063644820 20051)

  If a moderator of this forum is able to convey this message to the person concerned to Toshiba, it would be extremely useful too ^^

  Thanks for reading.
  Next time!

  Alcahest

  Hello.

  Thanks for this information. It seems that you are passionate about Qosmio :)
  Well, I think that the Japanese unit models differ a bit like a European models also the utilities and drivers. It of strange that the other drivers work correctly but
  I'm sure that if the new driver, tools and utilities are available for European units you will find this on the site of Toshiba Europe.

  Good bye

• Hot chocolate spilled on my keyboard - Qosmio E10

  I poured a small amount of hot chocolate on one side of my Qosmio E10. Oops!

  Since I gave it more than 24 hours to turn out to dry out and I also disassemble the keyboard to wipe - there was some residue dried hot chocolate in it. I'll try to put it on again in a while to see if the keyboard works now (it stopped completely, just make sounds beep-beeps), and did a search online for alternative keyboards...

  Does anyone have any other suggestions before as I have buy a keyboard? And if I do, how do I do to install? It's just a matter of take the type chip out thing, and put a new one in and then screw everything back?

  Thank you!

  > Since I gave it more than 24 hours to turn out to dry out and I also disassemble the keyboard to wipe - there was some residue dried hot chocolate in it. I'll try to put it on again in a while to see if the keyboard works now (it stopped completely, just make sounds beep-beeps), and did a search online for alternative keyboards

  In the worst case, your motherboard or RAM module are dead. The tone at the beginning of the boot order is displayed, because detected a problem on the motherboard.
  There are several times my girlfriend spilled a coke on my keyboard. Computer laptop didn t start and I thought that it s a serious issue, but I ve eliminated a RAM and Notepad starts very well.

  However, check your machine again and maybe he will start correctly.