I allowed an associate charge a "system builders environment on my certified copy conform to Xp and now it is detected as a counterfeit."

Similar Questions

• System has crashed, reinstalled Vista Ultimate x 64 OEM DVD and now cannot be enabled as a key is already "in use".

  So yes, my little hard drive, so I bought a new, formatted to NTFS and installed my copy of Vista Ultimate x 64 I used on my drive HARD end. I was unable to activate my OS because of the product key being «already in use» Is there something I can do or where can I find the number to talk to a human being that I can explain and get this situation resolved?

  Activate manually.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• How will I know if my copy of windows XP backup is a Dell OEM or my original OEM ordered from Microsoft System Builders?

  I have a lot of saved windows XP CD, most listened with SP3 slip, how will I know if they were created from my Dell OEM CD or my CD of system builders?

  The Dell who should have a folder $ $OEM he must either be a Dell Support (in XP Home and Pro) logo or the installation files called Dell (MCE).

• I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

  I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

  Hello

  Run the windows Upgrade Advisor 7

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  and repost in the windows forums OK 7

  Here is the vista forums

  Windows 7 forums on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Why and when Microsoft Will release a file (s) Patch of system upgrade that will allow a 32 Bit OS system to a system of 64-bit operating system?

  Why and when will be communicated to Microsoft, an upgrade or a system Patch File/s, allowing a system of 32-bit Windows (such as Windows 7) operating system, upgrade to an OS 64-bit (as Windows 8) system?

  As for now, it is NOT possible to upgrade a 32-bit of the windows operating system like Windows 7 or Vista or XP, so that the latest operating system (such as Windows 8), but what I want to do is install (once it is released into the public domain), Windows 7 32-bit to 64-bit Windows 8.

  This situation will be resolved with time, prior before NEXT new operating system release date of microsoft.

  Thank you.

  Chris...

  I wouldn't hold my breath.  What you CAN do is to make a new partition and install Windows 8 or another 64-bit of the system on it.  It is not hard to do, and with huge hard drives that have modern computers, there are usually lots of disk space to do so.

• I lost my Windows Vista System Builders physical disk, and; need to reinstall.

  I am owner of a 64-bit edition of Windows Vista OEM: the System Builder Version.  I have all the information there, and; aircraft already installed and registered with Microsoft.  I can't find the acutal disc to reinstall it.  In my view, that he was robbed me.  How can I get a System Builder replacement disc so that the product I paid for, I can use?

  Hello

  This should help you.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer or the manufacturer of hardware site Web/s and get the latest drivers for your particular model computer or laptop hardware.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows XP SP3, corrupted registry. Corrupt / missing windows system32\config\system - restore via Recovery Console cannot copy files of origin of the system32 folder. Please help.

  When my husband's computer was incorrectly stop we met the ' Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "error message. I understand that the registry is written on the judgment and that it is not rare that the registry damaged during the power failure or abnormal stop. Checking the bandages for details on how to proceed, and begin the process of recovery appearing in theArticle ID: 307545 of http://support.microsoft.com/kb/307545/en-us below:

  «First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the folder System32\Config.» When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     Copy c:\windows\system32\config\default c:\windows\tmp\default.bak.

  There was no administrator password prompt, but the console began without incident. I was unable to copy these files to a folder. (Yes, I checked my spelling and made certain that the commands, parameters and syntax are accurate.) I created another directory and tested the console by copying the files to repair to the secondary directory. These copied without any errors. I was able to discern that there are no problems with the console itself.  At this point, I'm not sure how to proceed.  There is data that has not yet been backed up and must be recovered where it is suggested to do a new/factory install. Therefore, I need to know if there is another way to proceed to the recovery or if I do a fresh install. In addition, any suggestions on its disk data recovery, if the new installation is the only way to move forward, also would be appreciated. Thank you.

  Just to be clear, when you have tried, for example, to run this command:

  copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  You have an error message (please report it to full) or maybe nothing happened.

  But you did another directory (say 'c:\windows\otherdir') managed by running the following command:

  Copy c:\windows\repair\system c:\windows\otherdir\system

  If this is the situation in which you are in, you are essentially impossible to create a backup copy of the current registry damaged.  This is not the end of the world, because as you can see by reading the full article, you never use these files master anyway.  This step is just included "on the side of caution" so that you can restore the original registry files, corrupted, if for some reason you wanted to.

  Because you cannot start the system anyway, you might as well begin the process described in the article without creating these master files.

  You can either make the step remove first:

  delete c:\windows\system32\config\system

  or just try to copy the files in the directory of repair on the files in the \system32\config directory and answer 'Yes' when asked if you want to replace the existing file.

  Note that the success of this procedure assumes that you run the system restore.  Otherwise, you'll find yourself with the registry as there was when Windows installation - which certainly won't be compatible with the State of your machine today.

  Essentially, what you are doing are the following:

  1. While in the Recovery Console, restore the registry to its state when you first installed Windows.  This allows you to start Windows - but do not try to use any application program.

  2. in Windows, copy of the registry that is saved in a recent restore Point to a location that are accessible by the Recovery Console - but not by using the restore application from the system itself, because with the 'original' registry, System Restore is not aware of these restore points.

  3. While in the Recovery Console, restore the registry using the files you made available at step 2.

  I don't really know what's the point of the stage of section 4, unless it is to use system restore to restore to a different restore point.

  If you can't make things work by following the steps above, or if there is no recent restore points to use in step 2, then you are correct: you must backup your data, do a clean reinstall of Windows, then reinstall your applications with original media and restore your data from backup.

  If you are able to do step 1 and start Windows with its original register, you should be able to use the native Windows tools to backup your data.  I would not use NTBackup, but rather just copy (do not use the 'move' command) data on an external hard drive.  Alternately, you could boot from a live CD of Linux (for example, Knoppix) to access your drive and copy the data.  Or if you have a bootable CD from a like Acronis Disk Imaging application, you can use it.  If you would like more information in this sense, after return.

• I upgraded to Win 8 pro win 7 HP (System Generator cd) & win vista HP (acer laptop). I can now use these keys on a new PC?

  I upgraded to Win 8 pro win 7 HP (System Generator cd) & win vista HP (acer laptop). I can now use these keys on a new PC?

  Windows 7 HP was used on my custom PC. It's from a CD system manufacturer that I bought at the store builder, and I still have the CD.
  The windows vista HP computer come with my acer laptop. No CD of the OS.
  Now that I've upgraded these two devices for windows 8 pro can each with new product keys, I now use one of the two buttons above on another, new PC? in particular the Windows 7 HP.
  Thank you.

  No, you cannot transfer because they are OEM licenses.

  Windows 7/Vista OEM versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  Also:

  What about upgrading the software? The software covered by this agreement is an upgrade of your existing operating system software, upgrade replaces the original software that you upgrade. You keep any rights to the original software once you have upgraded and you can not continue to use or transfer in any way. This contract governs your right to use the software to upgrade and replace the agreement for the software that you upgraded.

• I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan photograph b

  I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan of photography by Adobe (including lightroom and photoshop)

  Hi Robertc70810949,

  It is a digression of your technical question, but you haven't purchased two separate subscriptions for creative cloud? You are probably aware of this, but just in case you're not, a single Plan of creative photography cloud allows installation and activation on two computers. These computers can be two Macs, two windows, or one of each. See Adobe Creative Cloud FAQ for more information. Of course, you can have another reason to buy multiple subscriptions, but I wanted to clarify in case you can save yourself a little money.

  Kind regards

  Del

• Hi I have a current plan of photography for £8.87 per month which is paid and up-to-date, it allows me to use PSCC and LR. I've updated the two about a week ago and now LR is ok but PS says it's now a trial and I want to buy it and my trial runs out soon?

  Hi I have a current plan of photography for £8.87 per month which is paid and up-to-date, it allows me to use PSCC and LR. I've updated the two about a week ago and now LR is ok but PS says it's now a trial and I want to buy it and my trial runs out soon? How can I get to the scene, I was up front with the full version of PS?

  Hello

  Please follow the steps below.

  Solution 1: -.

  1 sign out and sign back for creative cloud.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Solution 2: -.

  Check the "hosts" adobe entered into file. (If you don't see all the entries of adobe, go to solution 3)

  1. go to the location of the file "Hosts".

  WIN: C:\Windows\System32\drivers\etc

  MAC: Go to the menu finder on top > go to files > type '/ etc', press return.

  2. move the file hosts on the desktop.

  3. open.

  WIN: Open it with Notepad.

  MAC: double click on it.

  4 remove all entries of adobe, that it does not obstruct your machine to connect to the Adobe's Activation Server.

  5. rear move "/ etc" folder.

  Solution 3: -.

  1. check if you are using any kind of firewall (network/system) / proxy.

  2. turn off firewall / proxy.

  I hope this helps.

  Kind regards

  Vivet

• IPhone 5 s not charging after put 9.3.4 updated and now no battery left.

  A few days ago that I updated my iphone to 9.3.4 5s since then it shows that he is in charge when it is plugged to a wall mounted or portable charger but is not fresh. And now there is no battery to turn the phone on. After charging for hours it finally turned on with 2% and in a few minutes, it was drained. Once again no battery power. Please suggest if someone is faced with a similar question and that he had a solution for this problem.

  Hello

  Follow the steps here, including the verification of the charge for debris socket:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Thunderbird has suddenly charge only 200 emails on behalf of yahoo of the year 2011 and nothing else. What's wrong? -Due to problems with Yahoo.

  I use Thunderbird to access 3 e-mail accounts. A few days before, all the emails of one of these missing accounts and now Thunderbird does not charge that 200 emails from this account of the year 2011. News, incoming mail does not appear, and I can't know how to extract or import any emails which are newer than 2011.

  What is your email provider?

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.