I am getting an access denied for file rfmpsf.dll

Similar Questions

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I get a "ACCESS DENIED" pop up when I save my files.

  This is a Web site, I get a "ACCESS DENIED" pop up when I save my files. TI worked for weeks and never seen that before. I can remove it from the list of managed sites and add it back to start recording again, but it's just a matter of time before it starts to appear again.

  I tried to find something in preferences and nothing is done, I can't find a solution.

  

  So I found the root of the problem.

  1. I use two different computers at the same time to work on my Web sites.

  2. I had dreamweaver opens on a doing the actual work on the root folders open on the other (I opened my Web pages by using a browser on this computer using dreamweaver on the other).

  3. apparently, when I have the root folder open on one computer and use the folder root in Dreamweaver on the other, the firewall or software itself denies access.

  4. when I close the folder root on computers, Dreamweaver allows me to do everything in one more time.

  Weird, but the problem is solved.

• When you download the SP3 I get an access denied screen.

  I'm trying to update an old computer with SP3, I get an access denied screen. Someone has an idea how to fix?

  Hello

  I'm sorry to hear that you are not able to install Service pack 1. Please, I beg you, do not worry I will do my best to get out you of this situation.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the exact error message you get?

  2. do you have an anti-virus installed on the computer program?

  3 are logged as administrator?

  4 are you trying to download the service pack manually or through Windows update?

  5. are you aware of any changes made to the computer before the show?

  Here is a link with some good steps that you must follow before you install service pack 1. If the problem persists, you can go through the article troubleshooting steps and check.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• As an administrator why is it when I want to restart a service in the task manager that has stopped, getting the access denied.

  original title: access denied

  Hi, it is listening the * out of me, if I logged as administrator how comes when I want to restart a service in the Task Manager which is leaning, I get an access denied message? Help, please. I shouldn't have complete control of my laptop?

  For security, Windows Vista and later does not execute administrators has full administrator rights. In some situations, it is necessary to start the program that you want to use with privileges to administrator, right click and select "run as Administrator".

  http://TechNet.Microsoft.com/en-us/library/cc507867.aspx

• Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode.

  Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode.  No high privilege invites provided.  Command is CONVERT F:/FS: NTFS.

  F: is a USB drive of 250 GB FAT32 mounted port.

  What is the solution for this issue.

  OS Vista Home Premium SP 1.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  See if the methods above will help you.

  See you soon.

  Mick Murphy - Microsoft partner

• Access denied for user access path...

  I created the new filter by copying an existing and making some changes. I created this as an Admin user. However, when connect as a tester, I get the error "access denied for user to the path... /.. '. /.. "/ New filter.
  
  I think I might have to grant the privilege to this user to the filter. But I am not able to know how I can do.
  
  Help, please.
  
  Thank you.

  give access to shared folders were the filter is stored in the user, because the common filters were stored there only.

  Thank you
  Vino

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I get an "access denied" when I try to import my scanner.

  With the help of import WIA to scan an image or document in Photoshop CC (2015), I get an "Access denied" message, although Photoshop recognizes the scanner. The system is Windows 10, 64-bit.

  You suggest to reinstall Photoshop through the creative application of cloud and then try again.

• Im trying to download adobe pro xi and get an access denied message, need solution

  Im trying to download adobe pro xi and get an access denied message, need solution

  Hi Tom,

  Please try to download the app here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Thank you

  Abhishek

• access denied for user access to/users/weblogic/_portal/dashboard of path

  Hello world
  
  I installed 11.1.1.6 OBIEE. Until yesterday, everything worked well. But today, I made a new RPD and restarted BI services.
  
  Then after that when I open MonTableauDeBord it is throwing the following error
  
  "access denied for user/users/weblogic/_portal/dashboard path available.
  
  One faced this question earlier? Please give me some suggestions to overcome this problem.
  
  Thanks in advance.

  If possible, remove the weblogic and weblogic.atr folder and restart the BI services

  Either using Catalog Manager, change the permissions

  Published by: svee on July 31, 2012 11:28

• Access denied for user path in 11g

  Hello
  
  I deleted and recreate a user, when I login and goto my dashboard it shows error below.
  
  access denied for user access to/users/kavitha/_portal/dashboard of path.
  Error codes: O9XNZMXB
  
  Thank you
  Kouadio.

  Kouadio,
  Find the sub folder

  That is to say, drive installed: \Oracle\Middleware\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\YourCatalog\root\users

  1 delete the problemcs folder and of
  2. restart the BI services
  3. sign in with the user.

  Thank you
  Oldia...

• get the blue screen for video ati3duag.dll and also 0x000008E (0xc0000005), 0xBF0C8855.

  ERROR MESSAGE
  I get the blue screen for video: ati3duag.dll, BFO72000, time stamp 33fb6e2af. How to find & fix the problem? Speak not disable bios memory.

  Also I get: 0x000008E (0xc0000005), 0xBF0C8855.
  This happens when I want to watch a video.
  

  
  
  I use windows XP Home Edition

  Thank you
  Laurie
  

  I guess you have a problem with
  your video driver. You may want to update or
  It may have been a version that your
  hardware has problems with.

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• Whenever I try to charge my laptop I get an error message saying: file: PSHED.dll status: 0xc0000098.

  original title: PSHED.dll

  Whenever I try to charge my laptop I get an error message saying: file: PSHED.dll status: 0xc0000098 Info: windows failed to load because a required file is missing or corrupt. and I lost my original disc to repair.

  I believe that this has happened after I tried to update my windows update system.

  Hello

  You can run file system analysis checker and see if the problem still persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Access denied for each file

  Dear all

  I hope you do well.

  Please let me know if you can help me with the following problem.

  I have a laptop with windows vista home premium, I only C & D drives, only a single user.
  in front of a low, I added new standard user called HARNOIS, no administrator and I edited the security option for the D drive, and I REFUSED all permissions for this user 'HARNOIS', which means HAMZEH may not access anything on the D drive.
  then after a day, I deleted account HARNOIS and then I tried to restore everything as before, but unfortunately my (Administrator) account, I encountered ERROR of ACCESS DENIED, I tried to take possession of each folder and then apply a full permission and subfolder and files in this folder, but the problem is the following:
  I need to change the option of advanced security for each file in this folder, nothing to apply at once, instead, I have to file-by-file and I have a large number of files in each folder.

  so, how can I restore my previous setting at a time.

  Thank you in advance.

  Best regards

  Faisal

  Hi FAisalFodeh, try this fix it tool to reset all security settings on this system http://support.microsoft.com/kb/313222 Steve Hebert - MVP Microsoft, Internet Explorer