I am new user and get a "brush" effect when I didn't ask for one. It occurs randomly and in different areas of the image. This happens when the display of the library to develop. IM on an iMac.  Does not occur with the same image on my Macbook Air. I ca

Similar Questions

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• Photoshop at$ 9.99 CC is valid for one pc... or I can run on the same account?

  Photoshop at$ 9.99 CC is valid for one pc... or I can run on the same account?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• Remote Desktop works when my office and cell phones are on the same system, but then when I take my laptop home, it does not work!

  I recently updated my computer to Windows 7 Pro.  I also have a laptop running Vista Pro.  I have configured remote desktop on my Windows 7 machine to allow my laptop to access and it works fine when I work the two machines on the same Linksys WRT54 router, here at my small business.  I have configured my router to allow communications to port 3389, but as soon as I take my computer laptop home, I can't access my desktop computer.   I have to configure my home router as well?  It's a new Motorola ADSL router/modem and no place in the configuration to allow port forwarding or port address.  Help!

  Hello

  We are unable to access a computer from another computer if they are in another network by using remote desktop.

  If they are in the same network, use the following links as reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Hope that helps.

• Why Firefox will automatically open a new tab and go several times to the same specific web page? I don't have this Web page in my "Favorites" folders

  I have my browser open, work writing / reading email and BOOM, another tab opens and it's always the same web page. Why Firefox opens a new tab without any input from me? I don't have the suspect web page saved as a "favorite."
  Nothing appears on no bug/virus/spyware/...et.al. programs. WHERE hides this pita? `

  I also have the problem. in my case that it is caused by an add-on, I installed recently. name of the add - on's Personas Rotator. I have just to disable the add-on and everything back to normal. just check your recent module, disable it and see if the problem persists.

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• Pass values between different areas on the same page.

  Hi guys!

  I'm developing a simple application where we have the list of students. I'm displaying information on a separate page for each student. Do you have any idea how and if I can pass parameters between regions, on the same page? I have a view showing, student card name information etc, and I want to create another view on the same page, which will be the student and will return a list of its subscribed courses.

  Part of my database is something like this:

  -------------

  Students

  ------------

  ID (PK)

  ------------

  -----------------------

  Student_course

  -----------------------

  ID (PK)

  Student_id (FK)

  Course_id (FK)

  ----------------------

  ----------------

  Course

  ----------------

  ID (PK)

  You have no idea how this can be done? I found information how to pass parameters between pages, but not on the same page.

  Thanks in advance!

  P.S. I am using the Application Express (declarative programming via a web browser), the use of the Application Builder.

  I discovered that I really had to. I just had to replace the "1" in my sql query with: P9_STUDENT_ID

  Thanks for your help anyway!

• Different value for the element on the page on different areas on the same page?

  Hi all:
  
  I use APEX 4.0.6 and I have a page with 4 regions and each of the region shows a classic report which SQL is very similar to the other:
  
  for example
  
  For region 1, the SQL looks like select * from history where status = 'A ';
  For region 2, the SQL looks like select * from history where status = 'B ';.
  For region 3, the SQL looks like select * from history where status = 'C ';
  For region 4, SQL looks like select * from history where status = ';
  
  To optimize database performance, I like to create a page element called p_status_value on this page and using the syntax of following link for the SQL statement for all 4 regions:
  
  Select * from history where status =: p_status_value;
  
  However, I need this page element value is dynamically change for each region:
  
  For region 1, p_status_value = "A";
  For region 2, p_status_value = 'B ';.
  For region 3, p_status_value = 'C ';
  For region 4, p_status_value = ';
  
  Also, I need hide this element of the page on this page.
  
  Can someone show me how to do this?
  
  Thanks in advance!
  
  Kevin
  
  Published by: Kevin Zhang on May 10, 2011 13:03

  Then I would have 4 regions, with each region report, create a box item in each area, called PXX_REGION_VALUE and then your request is:

  select * from history where status = :PXX_status_value_X; (XX for page # and X for region #).. The database engine will crunch through the query and your dashboard will work fine..
  
  Thank you,
  
  Tony Miller
  Webster, TX
  
  If vegetable oil is made of vegetables, what is baby oil made of?
  
  If this question is answered, please mark the thread as closed and assign points where earned..                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• Question: How to create the new user and schema in 11g?

  Who can give me the answer how to create a new user and a schedule?
  
  I had installed oracle 11g DB and oracle in my OS windows client. I found in the 11g than there is no console management business with the new version. It is no different with oracle 10g. So I don't know how to create this new user.
  
  I had created a new DB instance, but I did not how to create a user on it. Who can give me a helping hand for who? I hope a give oracle experenice expert answers.
  
  Thank you very much!
  
  Published by: user774630 on October 27, 2008 22:01
  
  Published by: user774630 on October 27, 2008 22:09

  Hello
  I'm not sure which option you are talking about? [Do you use the EMCA, http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If this isn't the case, the command line that the other is using DBCA (Database Configuration Wizard). I think you're talking about that. Yes, if the message comes from creating the repository that soon after, you can connect to the EM. You would get the port no port HTTP of EM comes from the $OH/install/portlist.ini file.
  HTH
  Aman...

  Published by: Aman... on October 28, 2008 11:36
  Waived, insertion of link does not work.

• If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  Hello

  The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

  We should go out on 13 September, after which it can be installed by following the steps detailed here:

  • Update the software on your Apple Watch - Apple Support

  More information:

  http://www.Apple.com/Watchos/

• When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

• I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  Anyone had this same problem? I'm doing something wrong?

  Hi Jesse,.

  Please follow did not receive expected Adobe email

  I hope this helps!

  Kind regards

  Sheena

• Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Locking: double post. See: Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

• How do I install sql 2008 and sql 2008 R2 on the same user account in vista

  I am trying to install sql 2008 and sql 2008 r2 on the same user account and get error message that the account cannot be used. How can I install sql 2008 and sql 2008 r2 on the same user account in vista

  Hello

  try to repost/ask in the SQL Server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/