I am trying to burn a CD and it starts to burn, and then tells me that burning failed.
See the subject line. That's my problem. My D drive will not burn a cd.
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.
Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.
Several good info here:
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014
===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Emailing links directly from firefox using my email to business was easy, but now, using windows 8 (currently firefox v 34.0.5) I keep getting redirected to a page asking I have add my e-mail (exchange, office 365) account. However when I do this it just says that this account is already added and don't give me any other options. I also tried to add Outlook and Exchange ActiveSync and the result is the same. Can someone advise please?
If I open the same pages in internet explorer, I can send the link without any problem but firefox is my favorite browser.You are using an add-in on? https://addons.Mozilla.org/en-us/fire.../email-link-button/
Once reach you the accounts and check the credentials on your operating system, it should work.However, if you want to change what is happening to try the following steps: https://support.mozilla.org/en-US/kb/change-program-used-open-email-links
-
It also keeps invites me to install the google toolbar, I have ignored.
Once I get on the browser, I get the message that the upgrade is not accepted and will be unstall annd guests me to restart firefox.If under Tools > Modules > Extensions, you have several Console Java extensions prior to the release of Java Console 6.0.21, follow these instructions to remove the 'old' (read carefully): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
-
original title: computer Dead after chkdsk
I used chkdsk after trying to do a defrag and send a message that there was an error on the disc. Asked me to use chkdsk after a statup as a volume is in use. I did it but when I went through the suite, the computer was completely dead. I think I gave the wrong settings of the chkdsk command. How can I get my computer operational again? I use Windows XP
What do you mean by 'completely off '? Is - literal? All in all, nothing happens when you restart the computer? No noise? No fans? No beeps? No video, no BIOS or POST information appear?
John
-
Original title: cannot save files
Hi I am unable to record any type of file. Save/open appears and it seems save (all be it very quickly), but when I look for it, he could not be found or I get a message telling me that the shortcut is not found. I tried a sfc scan, and it tells me that there is a problem in c:windows\Logs\CBS\CBS. Newspapers, but when I tried to look for these files I refused access. I use Vista and Explorer 8.
I hope someone can help x
You're right, it's too long to post here. I tried to send mine here. No go.
I only suggest:
1. use Windows Live Skydrive to transfer the cbs log. Then send us a link in the newspaper.
But apparently you don't have SkyDrive.SkyDrive is free and is part of the Windows Live products. Consider installing it.
Here is the link:http://explore.live.com/SkyDrive
2. I am a member in Vistax64 Forum. (Don't let the 64 not dissuade you. It does not the 64-bit mesn.)
http://www.Vistax64.com/#Vista-forumsI have no problem sticking my cbs newspaper there.
If you want to sign up and post the log for help.3. I am also a member Windows Client Tech Center. You can sign up and post there with the CBS.
Windows Vista IT Pro: Windows Vista Applications Forum.
http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/threads
-
Windows Setup status
Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert". I have no idea what it is, and I have no disc to put on this line? If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes. No idea how to stop this from happening again? I did all the steps that have been mentioned earlier and no results. I even did a system recovery. I don't know what to delete. Please help thanks
Hello
These messages usually mean that you have a problem with the HP printing software
Contact HP
http://welcome.HP.com/country/us/en/contact_us.html
Contact HP options at the link above.
HP's Support Forums at the link above.
-
Original title: acro32.exe
I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is he keep awake. What is and how to fix it?
If you really see a message about "acro32.exe" is probably malware you should scan your computer with the virus eset online scanner and then download, update and run the free version of MalwareBytes AntiMalware.
If, as is most likely, the message concerns AcroRd32.exe, the main executable file of Adobe Reader. Go to control panel > programs and features and uninstall Adobe Reader. If you have problems uninstalling Adobe Reader, see--> http://labs.adobe.com/downloads/acrobatcleaner.html
Assuming that things patches, install Foxit Reader (free) instead--> http://www.foxitsoftware.com/Secure_PDF_Reader/
Or, if you really want Adobe Reader back, go here--> https://get.adobe.com/reader/ (remember to uncheck the box to install McAfee Security Scan or any other 'add-on free")
-
Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I am using Lenovo y50... help me please
The y50 Lenovo is a hybrid and that manufacturers are especially ThinkPads, I guess that Adobe sees it as such is why you get the phone display.
However, you can delete the 5876 to get a view of the desktop and all do it muse site
for example, the home page
change the /phone/index.html to businesscatalyst.com/index.html to see the office... I suppect you forgot the slash so delete/phone phone not only
Office ex = yourweb page | Home
-
I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to fix the problem because the link does not show?
You will have to go the website of the manufacturer of your graphics card and download the current drivers.
-
I am a user of PS (CS6) for a long time and come to THE (CC). I placed a vector image purchased from Amnesty International and the need to get rid of the white background... make transparent but have no idea how to do that. I tried to do in PS and then save and carry firearms but cannot save to the PS as a vector file (or AI) and the quality is greatly reduced. How can I do this in artificial intelligence?
Are you sure that it is a vector file?
If Yes: embed him then comes white and select Remove.
If not: Photoshop lets you remove white.
-
For some reason any, that my Windows Contacts show now an icon of Adobe for each of them, and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file. I tried right-clicking and using "open with...". "to set a default value, but no other programs are listed as possibilities. By clicking on 'Browse' of course gives me a window of the Explorer, but I have no idea what program select open Windows Contacts with.
Contacts Windows used to work perfectly, and I have no idea if this problem started, or why.
Can someone tell me how to open them properly, with the Windows Contacts program? Thank you!
original title: my Windows Contacts have Adobe icons and does not (Hijacked by Adobe Reader 9.0?)Go to: Control Panel, programs by default, associate a type of file or Protocol with a program.
Scroll down to:...
.contact... Click here to highlight, click on change program, click Windows Contacts.
Make sure that there is the box... Always use the selected program to open this type of file.
Repeat the process for:...
. Group
. P7C
.vcf
(Protocols)
LDAP
-
My OS is Windows 10. I have Firefox 38.2.0 and it tells me that it is the most recent version. However, I got emails telling me to upgrade to the latest version which seems to be in the 40s. When I go to the https://www.mozilla.org/en-US/firefox/new/ website, it tells me
"Looks like you are using an older version of Firefox."So I click on upgrade and it loads a file "stub". I close in Firefox, go to the folder where the file is located and run it. At the end of the process, he told me that Firefox still works and I have to close it for the new version to load. Then I go to the Task Manager, and he told me that no request to don't run! I went through this process three times without any positive result.
What to do?
I'll answer your question, but I suggest not changing your version of Firefox until find us out if having to do any with your plant, discussed here: https://support.mozilla.org/questions/1078897
At some point, there are two different versions of Firefox:
- Public release of the standard/large: currently Firefox 40.0.2
- Extended support release (ESR): currently Firefox 38.2.0
The version of ESR is intended for companies who need maximum stability for their users. New features usually are not added for at least six months, although security patches are issued approximately every six weeks.
You want to switch to the standard version? If so, this is how I suggest to do:
Clean reinstall it
We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.
(A) download a fresh Installer for Firefox 40.0.2 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).
(B) the release of Firefox (if any).
(C) to rename the program folder, either:
(Windows 64-bit folder names)
C:\Program Files (x86)\Mozilla Firefox
TO
C:\Program Files (x86)\FxESR
(Windows 32-bit folder names)
C:\Program Files\Mozilla Firefox
TO
C:\Program Files\FxESR
(D) run the installer downloaded to (A). It should automatically connect to your existing settings.
Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:
- \FxESR\Plugins
- \FxESR\browser\plugins
-
original title: game Fallout 3 on Windows 7 problem
I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.
Hello
You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.
Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit
You may need to contact the manufacturer of game for support
-
Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance
Just a thought...
It may be interesting to try to open Movie Maker and go to...
Tools / Options / compatibility... tab and left click of the
"Restore all defaults" button / OK. -
I try to run the security essentials and it tells me that I'm missing msvcp90.dll
I try to run the security essentials, and he tells me that I'm missing msvcp90.dll. Same problem occurring with a real player has not re - install. How can I recover file?
Hi BradleyMitchell,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. what version of Real player installed on the computer?
Msvcp90.dll error can be caused if the Visual C++ Library Runtime components are missing or corrupt on the computer.
Method 1
I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 2
If the previous step fails, then install the Package redistributable Microsoft Visual C++ 2008 and check if it helps.
Microsoft Visual C++ 2008 Redistributable Package (x 86)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=enYou can also post your request in the Microsoft security essentials forums using the link below.
http://answers.Microsoft.com/en-us/protect/Forum/protect_start
Maybe you are looking for
-
can I connect my ipad from 100V to 220V computer without frying it
now, I'm staying in pakistan for a long period of time, I bought my ipad in canada. Please tell me if the connection to a laptop or computer in Pakistan will be frying my ipad (as pakistan voltage is 220V)
-
"Off topic", how can I change my userid/community profile name
Hello For different reasons, I would change my userid/community profile name. I find that in the profile settings or in aid of the community etc...
-
How can I get another a Nano transceiver?
I need a transceiver new Nano for my Arc Touch Mouse how can I get another?
-
What to do to change my windows and microsoft install t
I have a new computer as a gift for my birthday. I need to know how I can put all my windows and softwear microsoft I have on my old computer to my new computer. I don't have the disc more or the key acrivation all of this information was lost omost
-
acquisition of upgrade windows 7
I'm trying to upgrade to windows 7 vista; I have buy windows 7 update or download for free? If purchased, it is downloadable?