I can adjust the paper supply voltage

Similar Questions

• need to adjust the paper after each print

  I have that 7520 printer all in one for 2 months (new)

  After each impression I have to adjust the paper otherwise, I get the message: no paper

  Make sure your paper guides are tight against the edges of the paper, while paper is loaded in the tray.  There should be little nicks in the status bar to help you confirm that the guides are engaged in the correct position.

  Otherwise if you are referring to the feeder manual adjustment can be the best thing you can do.  AutoDocFeeders are normally not snap and often need to be messed with on many models of printer.  Sometimes a small building of habbit can solve a problem like this.  If this isn't the case, you can try to contact HP support since it is such a new printer.  However, unless you can prove there is a mechanical fault on the tray or feeder, it probably isn't something they can do.

  You don't have something with the message No paper well.  Same as if the guides are disabled the printer should recognize there's paper in a way or another.  Questions guide paper normally takes place at the inadequacy of the size rather than no paper error.

• I can adjust the chime that alerts me when I restart my pc.

  I can adjust the sound of the chime that alerts me when I restart my pc. I have a Mac OS X Yosemite 10.10.5 Mini late 2014.

  There is what to cut and change the volume of the ringtone to start. That's all.

  http://computers.tutsplus.com/tutorials/how-to-silence-the-startup-chime-on-a-MA c - cms-21212

  IME.htm http://Macs.about.com/OD/tipstricks/FL/Adjust-the-volume-of-your-Macs-Startup-ch

• I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen.

  Problem with the size of the text

  I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen. Evil in my sight.

  Inhabitant of the desert

  Is this a comment or a question? If a question, care to share with us, what e-mail program you speak?

• My missing how tool sliders make their return so I can adjust the brightness, color...  CS6 PS with MAC using

  No one knows what to do?

  My missing how tool sliders make their return so I can adjust the brightness, color...  CS6 PS with MAC using

  Hi fisherphotofrenzy,

  Please click on window > adjustments.

  You should be able to see the adjustment Panel.

  Kind regards

  Tanuj

• You can adjust the opacity in Adobe video? My goal is to have a clip playing on top of another, similar to a double exposure. If not, is there an iOS application that can?

  You can adjust the opacity in Adobe video? My goal is to have a clip playing on top of another, similar to a double exposure. If not, is there an iOS application that can?

  I dug around and found that imovie 9 will do, not elegant, but looks like it will work for this experience.1

• Satellite 4300: You can adjust the contrast?

  Hi all!
  I just bought an old Pro 4300, and while I can find the adjusting brightness on the screen, I can't find any setting of the contrast. Can someone advise please
  (prefer not having solutions that involve the removal of the motherboard etc.
  -too depressing! )

  Thank you

  #Pete

  Hello Pete

  It will be interesting to know what operating system is preinstalled on this device. Anyway, please check this page http://209.167.114.38/support/Download/ln_byModel.asp and do not forget that all of the listed utilities are installed.

  Good bye

• Manually adjust the level of voltage acquisition on PIXe-6535

  How can I manually adjust the tension from acquisition to 2, 5V on an SMU-6535 using the .NET API? I went tearing through the documentation, and I keep coming up empty.

  Found.  It is under the DIChannel.LogicFamily.

          using (task NationalInstruments.DAQmx.Task = new NationalInstruments.DAQmx.Task ())
  
          {
  
            Chan var = task. DIChannels.CreateChannel ("PXI1Slot1/Port3/Line3", "", ChannelLineGrouping.OneChannelForAllLines);
  
            Chan. LogicFamily = DILogicFamily.TwoPointFiveVolts;
  
            / * rest of the code... * /.
  
          }

• My message is scrambled from a single source. How can I find the view menu so that I can adjust the encoding?

  
  

  You can press the ALT key, or press F10 to display the Menu bar

  • https://support.Mozilla.org/KB/what-happened-to-the-file-edit-and-view-menus

• Can adjust the audio levels with a single clip

  Very simple question that drives me crazy.  Just before I post, I'm a complete to this noob please go easy on me.

  I'm editing a podcast.  It is a clip, a track in first pro.  My sound levels varies between-3 and - 12db through recording due to parts where I speak louder and quieter.   I need to balance a little better, to make the quiet parts louder.

  I don't know how to do this outside the insertion of keyframes volume level in the clip, which is slow and manual and takes forever.

  Every search I do to normalize levels is all about several clips and by adjusting the maximum peak in the same, that will not help me.

  Thanks in advance!

  Adobe Audition is a speech Volume Leveler you might want to check.

• I can measure analog USB supply voltage using Labview?

  I'm basically feeding a (nominal) 5V USB power sensor, but the output of full scale depends on the real for a particular measure input voltage - what I want to do is to get labview to measure the voltage at the USB port at the same time it samples the voltage of the output sensor and then that of full scale output for that instant in time can be calculated and thus give a measure more accurate. Is this possible in labview? Thank you very much.

  Haydn Barker

  Makes a lot of sense, actually - probably would see a few mV dropped from the point of measurement of the sensor point... then you work with equations/remedies just to work with an inaccurate level anyway. Okay well I'll write that off as a bad idea then and just stick to the system, because it isn't now - I don't know that it will be enough. Thank you for your answers and help.

• Can adjust the elements on the page in MX, but not in CS3

  I don't know what to call this problem, then couldn't do a search on this forum. I have two computers, which works in Dreamweaver MX, the other running CS3. I can access different elements of a particular set of web pages in MX, for example to resize a photo. But in CS3 all the page elements in the div "content of" highlight as a single element, so that, for example, if I try to remove a Word from the text, the entire content - images, text, etc. - is removed instead. I made these pages in MX. I guess there are some default setting in CS3 which prevents me from access to individual content items. Here's an example page:
  http://www.Colorado.edu/English/faculty/facpages/Winokur.shtml
  Can someone help me? Thanks in advance.

  On Friday, July 4, 2008 03:14:42 + 0000 (UTC), "Zaphod234".
  wrote:

  > But in CS3 all elements on the page in the
  > 'content' div tag nail as one of the singular elements

  She did this with positioned elements. You can double-click on it to
  change inside.

  Gary

• I have no sound on my computer, even if I can adjust the volume buttons.

  I have a laptop HP Pavilion g6

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Kind regards

  DP - K

• You can adjust the settings so CC is no not alias during transformation?

  In older versions of Photoshop so I selected "nearest neighbor" in the interpolation of image in preferences, it would add not colours/alias.  I use a palette limited in my work (textile design), so this change makes me a little crazy.  Any suggestions?

  Thank you!

  It is always the case in Photoshop, unless you choose a different interpolation in the free transform tool or the command Image size.

• Unable to set my HP6632B supply voltage of 12 v with the hp66xxbc

  Hello:

  I use the IVI hp66xxbc driver to control a power supply DC HP6632B, and I get an error when I try to set the voltage of 12V.  I can adjust the tension manually on the front panel and using the option "Contact instrument" in the tool "Measure and Automation", but not with the driver of the IVI.  Any help would be greatly appreciated.

  I tried to set the ÖVP at 20, but the pilot didn't like either.  And I could do it manually. This part is not included in the attached report.

  Here is my configuration:

  LabVIEW: 7.1

  hp66xxbc driver: not sure.

  Just run "HP6632B-Init-and-Set - voltage.vi.

  Here is the error I get:

  "Error 1074135024 occurred to hp66xxbc configuration OVP.vi.

  Possible reasons:
  Driver status: (Hex 0xBFFA0010) invalid value for the parameter or property.

  Secondary error: (Hex 0xBFFC0004) parameter 4 out of reach, or an error occurred when setting setting 4.

  "Development: OVP limit"

  Hello Mike,.

  It seems that the problem is possibly due to the deactivation of the query ID in any of your folders.  In many cases the specific driver IVI uses by default the model with the minimum of features and smaller beaches.  Do you have errors if you try to set the ÖVP to 2 volts?  If you still have a problem after activation ID query and try a smaller value of the ÖVP, please post an example with a minimum of code that reproduces the issue and doesn't use the wrapper to live and also include a capture OR the spy of the occurrence of the error.

  See you soon,.

  NathanT