I can not change the type of standard user to the admin account.
I had a very difficult time, adding new accounts to the system. Now that I have, I can not change the type of standard user to the admin account.
As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
1 restart in SafeMode with network.
2. log on as an administrator.
3. click on start.
4. type the three letters cmd in the search box.
5. press on Ctrl + Shift + Enter
6. click on "run as Administrator".
7. type the following commands and press ENTER after each:
NET user
(This will show you all existing accounts)
net localgroup administrators 'xxxx '.
(This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).
Tags: Windows
Similar Questions
-
APEX 4.2 - can not access the admin account
Hi friends,
Apex 4.2, we installed successfully after the installation, we have tried to connected as user admin with the password specified during installation, but could not connect in it, its display as credentials not valid.
We tried to reset the admin apex password using apxchpwd.sql, then also I couldn't log in page. His shows the same error of invalid credentials.
We use Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - Production, server OHS and that the url we use to connect
* [http://172.16.1.151:7777/pls/apex /] *.
Brgds,
Max.Hello Max,.
Run the following query and delete all users returned and try to install again.
SELECT username FROM dba_users WHERE (username LIKE 'FLOWS_%' OR USERNAME LIKE 'APEX_%') AND USERNAME NOT IN ( SELECT 'FLOWS_FILES' FROM DUAL UNION SELECT 'APEX_PUBLIC_USER' FROM DUAL UNION SELECT SCHEMA s FROM dba_registry WHERE comp_id = 'APEX');
Kind regards
John. -
How can I change the Admin account if I don't have the password or the reset disk?
The original disk to reinstall vista are missing. Is there something I can do? Maybe reset CMOS (?) or Windows it a substitute?
Hello
I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords
read the policy at the link below
you need to reinstall vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg
Hi Escapermark,
Take a look at these articles to the knowledge base, one should set the gray on the problem:
http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
-
Can not change the brightness of the screen - HP ENVY 17 laptop
After the upgrade to Windows 8.1, I have the problems below:
-I can not change the brightness of the screen on my laptop
-When I clicked "Contact technical support" on HP support assistant program, he showed an error "HP support assistant has stopped working"... and closed the program. I downloaded a new at HP, but the same problem occurred.
My laptop PC info
Product name: HP ENVY 17 Notebook PC
Product number: A9P84UA #ABA
Please instruct me how to fix it. Thank you.
I posted the step by step guide here: http://www.tomshardware.com/forum/id-2748304/amd-intel-enduro-laptop-brightness-fix-win.html but if you are familiar with registry just search FeatureTestControl and see if the value is using f840 or f940 and replace it with ffff then restart your computer. should work now. But if you are still having the same problem trying to follow the steps on this post. see you soon!
-
I can't connect to creative cloud, and so I can not install the Photoshop account I paid for. I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password. Help, please. Thank U
Hello
Please contact the support.
Concerning
-
why I can not change the method of payment and my billing information?
why I can not change the method of payment and my billing information? By clicking on the buttons right just does not work
Manage your membership and your payment. Creative cloud
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone (do not support the weekend)...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN ) -
How can I change the MotoBlur account, the phone uses?
If I swap two phones Atrix, I suppose swapping SIM cards will not change the MotoBlur account that each phone is configured for.
So, how do we change what MotoBlur account an Atrix connects to?
You can swap sim cards, but you will need to re-enter the motoblur password associated with the phone to continue using it. Unfortunately, I don't think that you can swap accounts motoblur without a factory reset of the phone.
-
can not change the brightness in windows 7 on SL500
Hello
just installed windows 7 64 bit on my SL500. previously, I had vista 32-bit home.
granted, everything works, but I can't change the brightness. its default value (which is 85% I think)
I have the latest driver from nvidia geforce 105M display, but it does make a difference. also I downloaded power management and driver power management but always impossible to change the brightness.
also, the sound is not loud enough.
any ideas people?
Thank you
Pranav
I fixed it!
My SOLUTION: install the new drivers from nVidia, is now operating at 100%
http://www.nvidia.com/object/notebook_winvista_win7_195.62_whql.html
-
Can not change the mouse buttons
I tried new mouse on my computer, and now my computer will not recognize the original mouse as a Microsoft mouse. The keyboard and the mouse still work, but I can't change the buttons of the mouse for left-handed people my family before I had no problem doing this. The original mouse is a Sony Vaio device that works wirelessly with a keyboard via a USB input device. Any ideas?
See if that will help:
The problems with the mouse button or scroll the parameters
http://support.Microsoft.com/kb/303091 -
DVD not working not not on the laptop, because I can not change the region from 1 to 4
everyone is not how to work with the dvd region on laptops it said I have a channel on the left but just won't let me do.
JJ
Just a comment in passing. You can only change the region 5 times, so when you did this last change it won't let you make another. Be sure to choose the correct region.
-
Hello
I'm on Orange and I am trying to remove the signature when I send the email to my gmail account.
An earlier thread was really useful-
R Man
I'm going crazy trying to figure out how to change the signature on my blackberry curve 8300. I'm with Orange Business. On my camera, it displays the option, but cannot be changed. On my bill online orange it does not mention - in fact it is impossible to get information from blackberry. Could someone help me? I keep seeing references to the 'BIS' - which I suppose means Blackberry internet service - but this does not seem to help me? This is a website / option on the phone / or what? DRM for any help...
Bifocals
Hi and welcome to the forums!
You're BIS correct is the Blackberry Internet service.
If you go through the icon to setup e-mail on your phone, you will actually the site of the BIS.
If you can not change your signature through the device, you can connect to a PC Web site.
Thank you
Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you
The Orange UK BIS site
https://bis.EU.BlackBerry.com/HTML?brand=orangeuk
The BIS of the procedures via the PC site
But when I go on the site of Orange UK BIS I can't set up a new account as it says there is a already for my phone, and when I clicked on the link "forgotten password" and I sent myself a message that 'username and password do not exist. Please use your device to access Blackberry Internet Service. "When I use Setup email on the phone, I can see the signature but not change.
Y at - it a help for me, or am I stuck with this signature?
Thanks in advance.
the fastest is to call Orange UK and they will tell you how to connect to your BIS account for editing.
-
I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).Hey ArnisR,
I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.
The problem is caused by the last (HP) ISO (from March);
-Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi
-Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi
I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.
The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!
Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.
I hope this helps!
-
Still can not change the color of legend of radio by script
Hello
I tried to follow the advice in other threads when developers wanted to inactivate by script radio button choices, and also put the grey of the legend. What I find is I can disable the choice, but I can't just turn the grey of the legend.
If the exclusion group is named "MyRadioChoice" and the choices are (for example) "choice1', 'Lendemain2', '3 choice' because of the other entry choice 3 user becomes inapplicable, then wisdom is it should work:
MyRadioChoice.Choice3.access = "readOnly";
MyRadioChoice.Choice3.caption.font.fill.color = "192,192,192."
The first statement works, the choice is no longer can be clicked. But the second does not work, I can just change the colour in the legend. The script does throw any errors, it's all simply does not work. Can anyone help?
Add 'value' at the end: MyRadioChoice.Choice3.caption.font.fill.color.value =...
-
Thus,.
I don't know what happened, but I had somehow the virus/trojan thingy goingonearth.com... I don't even know if it has nothing to do with my problem. I know that since discover and try to remove the virus/trojan said, I experienced a few problems:
1. my file & image icons (tiles) were literally emptied in large mode. But there is NO icon file (photo). The text/image folder is still there. The REAL folder icon shows when using small icons, but if I switch to large icons, it extends a smaller and makes VERY pixelated (sp?) (photo). In any case, I have inserted screen captures.2. When you delete a file, I noticed the associated picture icon is black (photo).
3. I can't change my desktop image using the photos, I can however change the solid color black color I want OR I can use a canvas photo and set it as my desktop. The icons below the screen background images is empty as well (photo).
I can assure you that I unchecked the "always show icons, never thumbnails" option in the Folder Options under control panel (photo).
ANY help would be appreciated, it drives me crazy.
Thank you
CuzimjustmehI never found a solution to this problem. I've just upgraded from Vista to Windows 8 and everything is fixed. Clearly.
JustMeh
Maybe you are looking for
-
Can I synchronize list XCP DAQ with my analog input data data?
Hi all "I use ' ECU M & C" for measurement of a computer data using the XCP DAQ list. "The data is read at the sampling frequency I put in ' MC DAQ initialize.vi. This works well. I want to associate this data with my DAQmx device measures. Is it pos
-
original title: I'm unable to connect my new laptop... I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...
-
How can I lock a shared network folder.
I want to know about the network folder, how can I lock a shared network folder.Actually I'm under small network at home and I want to share some files, but I also want to protect files, no body, no go without my permission. Waiting for your response
-
Why I get redirected to the download site everytime I try to access a web site?
-
Smartphones blackBerry browser broken?
When you click on the «...» "menu of the web browser is no longer appears. When I click on Favorites, nothing happens and when I try to do a search via the address bar or enter a url for the browser wont go anywhere. What is going on?