I can not find the installation files, or the launch of the Premier Pro icon. Although the installation said ok

Similar Questions

• Can not find the downloaded file

  I regularly download files, and they will 'always' in the same directory. Now, I downloaded fedora-live-workstation-i686-22-3.iso
  of https://getfedora.org/en/workstation/download/and (a) I didn't get the usual "save/open" Download dialog and (b) I can not find the downloaded file. The < downloads - tools > FF screen displays the file as downloaded, but not (AFAICT) where he was placed.

  Any clarification would be appreciated. Thank you.

  (OP) Well, I downloaded the same file again and this time everything went as it should. For example, some of my 'facts' above must be wrong, but I don't know who. I suspect some personal deficiencies.

• Director of Windows can not find the file

  I made a presentation / film in windows movie maker, and it worked fine.  Then when I went to access the movie a month later, all photos in the film are absent, and the Director of windows message can not find the file you want to locate the file... There are a lot of pictures, I don't want to go to each of them... What's happening on why it does not find the photo files now?

  I made a presentation / film in windows movie maker, and it worked fine.  Then when I went to access the movie a month later, all photos in the film are absent, and the Director of windows message can not find the file you want to locate the file... There are a lot of pictures, I don't want to go to each of them... What's happening on why it does not find the photo files now?

  =============================
  The source files have been moved or deleted?
  The only records of the files project makes it the path...
  check the source file.

  If you navigate to the folder, they are saved in...
  the path must be restored. You should not
  to go to each photo. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can not find the file desktop.ini

  I back up my files each week to an external hard drive. When I get asked if I want to copy the desktop.ini file in the HARD disk. Problem is that I can not find where this file is actually located and therefore can not delete it on the source computer. I would like to remove this file to avoid the annoying question whenever I try to save my computer.

  I changed the settings for source computer to view the files and hidden folders. After you perform a file search, the system shows a path to the c:\users\valued customer\appdata\roaming\norton utilities 14.
  This folder contains only a log of the entries, none of which can be edited or deleted.
  Not sure if I do something wrong by looking for the file "ini".
  Does anyone have any suggestions?

  You are welcome.

  To clarify, I'm not Andy.  I copied and included the link where he was enrolled in its resolution in order to give credit where it is due.

  If you don't use Norton, use the uninstall tool to remove all traces of the software.  If she has appeared in the past about the 30 day trial and you disabled, perhaps why the desktop.ini file is displayed.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=English&CT=us

  See the solution re: lack of desktop.ini

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/lost-file-desktopini-accidentally/bdf19e51-6269-46c2-8a96-16327b1f89de

  This fixit deletes the file

  Notepad starts with "[.]". "ShellClassInfo] LocalizedResourceName=@%SystemRoot%\System32\Shell32.dll,-21787" when you start your computer

  http://support.Microsoft.com/?ID=330132

  Places suggested to search for the file

  Look here for the desktop.ini

  • : \Documents and Settings\All Users\Menu Menu\Programs\Startup
  • : \Documents and Settings\All Users\Menu run\programs
  • : \Documents and Settings\All Users Menu

  Good luck!

• None of my wps will focus on my emails. Says can not find the file

  Original title: spare part
  None of my wps will focus on my emails. Says can not find the file, what I'm doing. to send CV

  Open Windows Explorer and navigate to your file.  Open an e-mail message and drag the file to the body of the message to attach it.

• I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf

  I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf

  Hello

  Reader is software to view PDF' only.

  You must either a pack PDF to perform the function of thin or Acrobat.

  Reader is not the software to perform editing functions.

  Concerning

  Sukrit diallo

• can not find the file adobePDF.dll

  can not find the file adobePDF.dll

  http://helpx.Adobe.com/Creative-Suite/KB/error-file-adobepdf-DLL-needed.html

• Software DB can not find the installation 11r2 on Win2008r2 grid

  Hello
  
  
  I try to install RAC DB on a single node on:
  Win2008 R2
  Ora11g R2
  
  After successful grid install (as admin) I run the installation of the DB software and it says: INS-35354.
  OracleASMService + ASM, OracleOHService, OracleOraCrs11g_home2TNSListener services: are started!
  The path of the cmd is set: PATH=c:\app\administrator\product\11.2.0\grid\bin
  
  but he says - it can not find the grid software!
  
  I tried to restart the machine with nothing doesn't. I uninstalled it and installed again in 2nd directory different but still useless.
  
  What is special measures should be taken to prepare the system? (however successfully passes test grid installation phase).
  I use http://download.oracle.com/docs/cd/E11882_01/install.112/e18069/toc.htm
  
  Published by: g777 on 2011-01-11 11:22

  Salvation;

  "" I belive you can get a faster response on Forum home ' Grid Computing ' RAC, ASM & Clusterware Installation part forum

  Respect of
  HELIOS

• InDesign CS5 and can not find the download of this version

  I need to re - install indesign CS5 and can not find the download of this version - I can find CS5.5 and my serial number is not valid for this version

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• HP Pavilion g6-1310ea: can not find the ethernet controller driver

  I reinstalled Windows on my HP Pavilion g6 - 1310ea and can not find the drivers for the Ethernet, PCI Device and SM Bus controller controller. There seems to be no more this kind of drivers on hp suupp.

  Hello:

  I can't even to the driver page.

  Here are the drivers you must however...

  Ethernet controller: download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: Download, unzip and run the exe file to install from the first item on the list at the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  SMBus Controller: This is not on the driver page even if it worked...

  I zipped and attached to the driver that you are interested in below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click the controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• The desktop icon can not find the program

  I'm having a problem where when I click on my desktop icons they can not find the program that is associated with run.

  Most of them is related to sites Web that I often use, so I select Internet Explorer as the associated program then remember this radio button, but when I connect and get back in that I get the same error.

  I am running windows XP, I say this because I've posted this before, and I referred to a difficulty which will not work with this operating system.

  Any help would be appreciated.

  Hello JoseVasquez,

  Try the automatic solution of the following article:

  Article ID: 307859 - how to change or choose which program starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859
   
  This should help to restore default associations in Windows XP.

  Thank you

  Marilyn

• Deinstitutionalized drive, my computer can not find the music stored on the internal drive

  I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money.  The drive works fine.  I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty.  It saves space, but sees ALL files.  Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill.  Any help would be wonderful.  I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.

  My guess is, it is a question of USB MSC - MTP mode.

  Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes.  This is located under settings of the player.  (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.)  Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode.  And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files.  If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine.  If, however, you change mode, emits a "invisibility".  And if you're ready auto detection, the computer can change the modes on you without you knowing.

  And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.

  And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.

• Can not find the button Delete in my windows media player 11.

  I don't think you understand me... they ask something.no you won't miss them but my windows media player... when I right click on my files or files .it's not remove button only remove from the list button.when I click on this file disappears for a while but returned then again.this is not good because I want to delete a large number of my files in my library .so what is the answer do I have to remove windows media player, and then download it again.must be a response,.

  * original title - just had my question answer can not find the button Delete in my windows media player 11

  Hello

  ·          Are you a right click on the file in the playlist or library?

  Try the procedure described in the following article:

  You cannot view, add, or remove items from the Windows Media Player 11 library: http://support.microsoft.com/kb/925718  

• can not find the window Task Launcher options

  can not find the window Task Launcher options

  If you are referring to the Microsoft Word Task Launcher, in, click on the menu _ Word file > then click 'new '.... ». The Task Launcher is displayed on the right.

• DVD player, install the game, but can not find the CD to play

  This happened recently with all my games. My DVD Player recognizes that theres a CD/DVD in the drive and install without problem, but when I go to run the game after the installation, it asks me to insert the CD/DVD in the drive, or can not find the CD. any suggestions? already I've updated my DVD player, it's out of the question. only, he began doing this a few days ago

  Hi Ubergringo,

  1. What is the brand and model of the CD/DVD device?
  2. what game you are trying to install and play?
  3. are you able to view the contents of the CD/DVD using Windows Explorer?

  Please provide us with more details on the issue, so that we can better help you.

  If the problem is with the games Microsoft, then try the steps mentioned in this article.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.