I can pass complex data using wddx through a URL?

Similar Questions

• Asking how I can pass array generated using the registry to offset at the end of the iteration of a loop in the beginning of a new iteration?

  Hi guys,.

  I currently have a problem in my Final project of the year at the Nanyang Technological University, Singapore.

  Basically, currently I develop a Lab View 2009 comb filter (attachment: filter2.vi correct comb)

  Entry into the comb filter is delivered in lots of 1000 samples.

  However, I'm supposed to process data on a continuous basis.

  Basically, my comb filter takes the difference between the current sample (sample t number) and the number of the sample (t-40) and divides the result by the square root of 2.

  The problem is that for the second lot from, I have to take the difference between each sample 40 first the current batch for each sample 40 last of the previous batch. My program currently cannot deal with this problem since it can not pass the 40 sample past the current batch in the batch so that we can perform this task. I tested it using test comb filter.vi (attached).

  Could anyone help with a suggestion?

  I would really appreciate since the approach of the project deadline.

  Thanks before.

  Kind regards

  Agus Frédéric

  School of mechanical and aerospace engineering

  Nanyang Technological University

  Send samples of past 40 current a shift register. When you read then it's going to be the last 40 precedents.

  Then subtract previous last 40 40 first current and divide. Fact.

  Basically, as indicated in attached vi.

  /Y

• Pass the data XML Captivate through a Widget

  Hi all

  I use widgetfactory API to create my setup.

  I have a flash file Widget that reads the XML data and passes the variables in Captivate.

  However, I can not set the text box with the variable that I analyzed the XML data.  Any suggestions are appreciated!

  ////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////

  package

  {

  widgetfactory Import. StaticWidget;

  Import widgetfactory.events.WidgetEvent;

  com.adobe.captivate.events import. *;

  com.adobe.captivate.widgets import. *;

  import flash.events. *;

  import flash.display. *;

  flash.net import. *;

  public class load_lang extends StaticWidget

  {

  override protected function enterRuntime (): void

  {

  var myRoot:MovieClip = MovieClip (root);

  var mainmov:MovieClip = MovieClip (myRoot.parent.root);

  mainmov.text_00 = "This works very well.";

  var myXML:XML;

  var myLoader:URLLoader = new URLLoader();

  myLoader.load (new URLRequest ("languages.xml"));

  myLoader.addEventListener (Event.COMPLETE, processXML);

  function processXML(e:Event):void {}

  myXML = new XML (e.target.data);

  var myRoot:MovieClip = MovieClip (root);

  var mainmov:MovieClip = MovieClip (myRoot.parent.root);

  mainmov.text_01 = myXML.slide [0] .textbox [1]; It does NOT work

  }

  }

  }

  }

  ////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////

  Hi osbornsm,

  Try the above suggestion of Jim, but if this does not work then what probably is the widget is trying to load the languages.xml but can't find it. You will need to make sure that it is placed in the output directory of the Captivate file published to operate. Even in this case, you will not be able to make it work when previewing the movie.

  Probably a better way to go about this would be the XML file into your SWF widget. In this way the widget won't need to load. This is how you would integrate it:

  package

  {

  public class load_lang extends StaticWidget

  {

  [Embed ("path-to-file/languages.xml", mimeType = "application/octet-stream")]

  private var BinaryData: Class;

  override protected function enterRuntime (): void

  {

  var byteArray:ByteArray = new BinaryData();

  var myXML:XML = new XML (byteArray.readUTFBytes (byteArray.length));

  Continue to the processXML() code

  }

  }

  }

• Data transmission of form through the URL arguments

  Is it possible to pass the data as arguments to a URL link that will populate the fields of a particular form?

  Something along the lines of http://sample.com \form.pdf?txtField1="value 1", txtField2 = 'value 2' or something similar, even remotely.

  Yes, you do, it doesn't happen automatically. All features must be implemented in JavaScript, and the data must be encoded in the URL, using the quotation marks around of the field values is not kosher. Spaces must be encoded using the character '+' or ' % 20 ', for example.» Other characters must be encoded in the same way. Any reference that explains the URL encoding will have more information.

  The sample that I have which includes the necessary JavaScript code an acroform, not an XFA form, then it would be a help for you. You need to set up a script that runs when the document is opened (for an XFA document docReady event). The script should get the value of event.target.path (or event.target.URL), gets the query string (the part after the? characters in the URL) and analyzes the name pairs / value. It then uses this data to set field values.

  Edit: You may be able to implement the code using FormCalc, but I use it a lot, so I can't help with that part.

• Passing the data change to Subvi through reference: always newest lack input value

  Hello world

  I'm having a problem that I can not find the solution. I searched the forum and google, but I couldn't find an explanation. I hope you can help!

  In the attached draft, there is the "main.vi", which I use to control an industrial manufacturin mashine. On the façade, I have a group called "manual control". Whenever I have change a value in the cluster, an event is triggered to run the case 'hands-on' in the 'Wirbelschicht_main.vi' [called 'FBC (control of fluidized bed)' in the pattern-block main.vi]. In this case, the data in the cluster are updated via a reference. The order run "Manual control" case is placed in a queue.

  When I change the value of, for example, "InAirTempSet" from 0 to 5, then from 5 to 9, I would expect numbers in the Subvi update in the same way (first from 0 to 5 and with the next click 5 to 9). What I see is that the update process in the subviis always one not behind. Which means, I change the value from 0 to 5 in the main.vi and nothing happens. Then I change the number of 9 and 5 in the Subvi, 5 is received. Only when I change the number in the main.vi again, the 9 is passed to the Subvi.

  What is the reason for this and how can I fix?

  Thank you!

  Qbach

  It is the expected behavior. You read the reference control value at the same time waiting for the order to the queue. This means that once the queue ("hands-on") command is received, the value has been already read a long time ago.

  To avoid race conditions, transmit the data using the queue instead of read it asynchronuously with nodes of property. You are running in a race condition here, because that's exactly what your code tells the application to do!

  Norbert

• I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. 'Microsoft Exchange Server' reported an error (0 x 80040115)

  prospects for bt infinity

  I recently changed my home to infinity of BT broadband.  Now I can't access my email works through outlook over a VPN.  The signin VPN works ok, I can see my network co., but can not use outlook.   I get the following error at startup of outlook.

  Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable.  Outlook must be online or connected to complete this action. »

  Anyone have any ideas?

  Allan M

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Kind regards

  Ramata Thakur

• Flex 3 passing data using custom components

  Hi, I'm trying communicate using custom events.
  Means when user connections on a form.

  I'm setting up an Obkect of my user VO of ActionScript class and

  var: User = new User();

  User.Name = UITI.text;
  User.Pass = PWDTI.text;
  this.dispatchEvent (new LoginEvent (User));

  Now another component is actually listening to these data. Please let me know how I can receive these data recorded in this component.

  Here at thisComponent I am listeing to these data:

  < mx:DsiplayComponnet creationComplete = "recivedata()" >

  public function recivedata (): void
  {

  this.addEventListener (LoginEvent, handling);
  }

  public function handling (): void
  {

  Need a logic here that recive data how-to
  }

  < / mx:DsiplayComponnet

  Please help me.

  Thanks in advnace.

  Hi Kiran,

  In fact the above line is very necessary that you try to send the LoginEvent before the eventListener is saved... I mean are you first

  sending of the event, then after you load the Module... How do you think that the component will listen for this event when your component of Module

  is not yet loaded.

  So first of all, you need to wait for the Module to load and eventLisner to be registered first before ship you the event... Try also to register the

  eventListener in the preInitialize your Module that I posted the same thing in my last post...

  I hope you got my point and what error you did...

  Thank you

  Jean Claude

• I bought a new iPhone SE. My iCloud account still shows my old iPhone data use. How can I erase it from my ICloud account?

  I bought a new iPhone SE. My iCloud account still shows my old iPhone data use. How can I erase it from my ICloud account?

  Do you mean that you see your old data use on the new iPhone?

  Go to settings > cellular > [scroll down to] Reset Statistics

  Otherwise, where exactly do you see this use?

• I have an Iomega external HD model MDHD320-T. It has been used on an older Mac OX9 Office running. Can I access data on this disc hard by downloading a software compatible with my current Mac OS Yosemite? Thank you! George

  I have an Iomega external HD model MDHD320-T.

  It has been used on an older Mac OX9 Office running.

  Can I access data on this disc hard by downloading a software compatible with my current Mac OS Yosemite?

  Also, I find no other than ads Iomega site.

  Are they still in business?

  Thank you!

  George

  Search Wikipedia for LenovaEMC.

  The chances of finding software are slim to none.

• I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  The setting below causes the error. Change for the second selection, output values of all channels.

  

• Can I can use Skype through my window without any browser plug-ins or software?

  Hello

  I am thinking from using Skype,

  Is it possible in which I can use Skype through my window without any browser plug-ins or software?

  Hello

  The Microsoft Community has no real influence with Skype so if we had problems
  with Skype, we would have to use the same resources available to all users.

  E-mail address is removed from the privacy *.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - help
  https://support.Skype.com/en/

  Skype - Forums
  http://Forum.Skype.com/

  Questions about Skype
  http://answers.Microsoft.com/en-us/windowslive/Forum/Messenger-signin/messengerskype-frequently-asked-questions/cad4b55a-0c3c-4494-9d5d-cc4c96969691

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I lost the password I gave to a drive using Bitlocker in Windows 7, how can I return it or I can get the data in the back of the player?

  Hello

  I lost the password I gave to a drive using Bitlocker in Windows 7, how can I return it or I can get the data in the back of the player? Data are very important because by my studies are concerned. Help, please. Thank you!

  Hello

  I lost the password I gave to a drive using Bitlocker in Windows 7, how can I return it or I can get the data in the back of the player? Data are very important because by my studies are concerned. Help, please. Thank you!

  People like you that encryption data with bitlocker do it because they want their data accessible only by those who have the certificate. The sad news for you is that you have made a good choice with BitLocker: unless you have the certificate, your data remains inaccessible. There is no backdoor. If he had then BitLocker would be useless.

• I can't open PDF files sent through emails? I kept getting a message 'Acrobat X 1 Pro Trial a expir├⌐' I didn't know that I was using a trial?  What I pay for?

  I can't open PDF files sent through emails?

  I get a message 'Acrobat X 1 Pro Trial a expiré' I didn't know that I was using a trail?

  What I pay a subscription for?

  Hi phillipk70320833,

  I checked your account details for the same ID you use here on the forums.

  You bought subscription Adobe PDF package that is why you are unable to open a PDF file.

  You should perhaps install Adobe Reader (free software) or buy a subscription to open a PDF Acrobat DC file.

  Let me know what you want so that I can offer others.

  Kind regards

  Ana Maria

• Can I add date to name the file using burst

  Hi all
  
  I know that we can add the date to the file using %y and %m %d for
  
  E-mail
  AT·
  WEBDAV
  
  But is it possible to add the date to the file name if I'm bursting my file to a shared location.
  
  I tried this %y and %m %d but it does not work for explosion.
  
  Please answer
  
  Thank you
  Ronny

  Raise an SR to support this for the file option
  and
  To work around this problem, change your query bursting enrollment, to_char (sysdate, 'DDMMYYY') for the day, month and year, inorder to add to the file name component.

• For the complex data type, how to generate the Dll with compatible interface to C/C++

  Hello

  I used the Labview FPGA module to develop test equipment. Now, I need to write a driver that is to be a Dll with compatible interface to C/C++ for this equipment. So that my client who is familiar with C/C++ can call the driver without any study on labview. But I had a few problem on how to convert labview for C/C++ data complex data type. To clearly explain to my question, I have attached a simple example. (see attachment) I try to generate a Dll for the attached example VI and get the the function prototype at the head of the files as below:

  ' void OpenFpgaReference (LStrHandle * RIODevice, TD1 * errorIn, LVRefNum * FPGAVIReferenceOut, TD1 * errorOut).

  As you have known, the type of data "LStrHandle * RIODevice" and "LVRefNum * FPGAVIReferenceOut" Labview data format are. C/C++ do not have this kind of data type and can not reconige it. As a result, I can't call the Dll of C/C++ programming language. How to convert these two data type of labview for the C/C++ compatible data format, and then build the Dll? Anyone know about this?

  The answer is really apprecaited! Thank you in advanced.

  Ivan.Chen wrote:

  As I found in the following article:

  http://digital.NI.com/public.nsf/WebSearch/FB001AA027C8998386256AAD006C142D?OpenDocument

  LVRefNum is the name of resource of LabVIEW VISA or refnum, and "it is impossible to convert LabVIEW VISA name of resource or refnum VISession valid ID."
  This means that external code modules can not access & control the session VISA which is open by labview. But for my purposes, I will not attempt to access this VISA extenal code(C/C++) session. I just hope that save this session VISA in the external code once I opened it in Labview dll; and pass it to the labview dll when needed. While I have not need to login again when I need to control the device. Is it possible to do?

  A LVRefNum is really just a single int32 value. Its meaning is useless for other environments than those who created it so that you Michael not any what in C/C++ caller but pass it back to other functions in your DLL, but this often isn't a problem at all.

  You can take the following statement of the LabVIEW extcode.h headers and add them to your delabviewed header files to make it work in such a way.

  #define Private (T) typedef struct T # _t {void * p ;} * T}

  Private (LVRefNum);

  The LStrHandle you must set a standard C string instead in your export DLL and document what is the size of the string buffer should have if it is an output parameter.

  TD1 error clusters should also be divided into their parameters (C compatible) separate for all items or just to the left of suite entirely.

  Rolf Kalbermatter