I can't access my remote desktop settings

Similar Questions

• If I configure Windows XP for automatic logon, then I can't access with Remote Desktop in Windows 7.

  I have Windows XP on my old computer and Windows 7 on my new.

  I have my old computer with auto-logon installation as described in http://support.microsoft.com/kb/315231, when it starts, it will automatically in Windows XP.

  However, if I try to connect remotely from my new computer with Windows 7, I can I connect, but as soon as the old computer hangs on the spot, the automatic connect feature kicks in and the old computer connects again locally, actually expel the connection at a distance in a few seconds.

  Please notify. Thank you.

  I think that this is normal, you cannot establish a remote desktop connection to a Windows XP computer when automatic login is enabled, I believe that this has been changed in Windows 7.

  John

• SE error message: the local policy of this system does not log in an interactive way, trying to access a remote desktop connection.

  Original title: the local policy of this system does ot allows you to open an interactive session

  I get this error message when you try to access a remote desktop connection.  The local policy of this system does ot allows you to open an interactive session

  Hi CamilleHolt,

  1. were you able to use the before remote desktop connection?

  You can try the following steps and check if it helps.

  a. Click Start, point to settings and then click Control Panel.

  b. double-click System and select the remote settings and then click the Remote tab.

  c. click Select users, and then add the name of the user account

  d. click Add and then click OK.

  Note: Adding users to the remote desktop group requires that you are connected via an administrator account.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer.

• Upgrade to 3 computers need Home Premium and Professional___Will I need professionals on both computers, or only the host that I can access and remote desktop computer?

  I have 3 computers I want to upgrade to Windows 7. I think to buy the update pack Home premium 3 but need to remote desktop on a computer. Purchase a professional upgrade for 1 single computer after buying the pack Home premium 3? If so how will the upgrade?

  Why not ask here:
  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads?sort=viewsdesc

  They may be able to advise you about your options, etc.. TaurArian [MVP] 2005-2010 - Update Services

• Can I connect using Remote Desktop to Windows 7 Pro to Windows XP Pro?

  Original title: Remote Desktop

  can I connect to a windows 7 pro is a windows xp pro?

  Yes you can, please try the following:

  1 right-click 'Computer' and select 'Properties' (or open 'Control panel' and select 'System')

  2. click on "Remote settings" in the upper left corner of the window
  3. on the "Remote" tab, select "allow connections to this computer remotely.

  4. make sure that you uncheck "Allow only the connection of computers running Office remotely with level (recommended) network authentication" as I'm sure that XP does not support this.

  I hope this helps.

  Please let me know how you go with this

  Concerning

  Chris

• Can't the system remote desktop remote win7

  I try desktop remotely to a remote system win7 - the connection fails, and I can't connect to

  the remote system

  I am running norton security and disabled, but the connection still does not work

  the network is my home network and I think than its configured as a private network

  Any help would be appreciated

  EPF

  In Windows 7 and XP only professional versions can act as a hostfor Remote Desktop.

  There could be similar restrictions on Windows Vista.

  In each case, you must configure the host to allow VPN connections. To test, run these commands:

  1. On the host itself:
     Telnet %ComputerName% 3389
  2. On any computer on your network:
     Telnet {Hostname or IP host address} 3389

  In each case, you get a response. If you do not then the host is not set correctly or its firewall blocking your access.

  See also here: http://windows.microsoft.com/en-US/windows7/Why-can-t-I-connect-using-Remote-Desktop-Connection

• How can I access the Advanced Javascript settings?

  I am aware that, in recent versions of Firefox, the ability to disable Javascript has been deleted. I don't intend to reopen the discussion of that particular decision. But removing this option also removed access to the menu Javascript Advanced settings, which was much more useful than just disable Javascript itself. For example, although rarely, I have disabled Javascript entirely (other than at my own site of debugging), I disabled systematically the ability of Web sites to disable context menus or move and resize popup windows.

  Unlike turning off Javascript altogether, these are the settings that provide a positive benefit for the 'ordinary' (non-developer) users. If, say, I want to open a link in a new tab, then the correct way to do this is right-click on it. Sites which disable the right-click degrade the user experience and to allow a way to replace it is a good thing. What is the justification for removing the ability to disable Javascript entirely (and I don't understand, even if I don't agree with him), I see no reason to remove access to these advanced settings.

  So my question is, how do I re-enable javascript access produce settings? I don't see any obvious setting for her in: config and simply disable javascript entirely through this method is not what I want to do.

  I have a post that lists the three corresponding about: config preferences here: https://support.mozilla.org/en-US/questions/967108#answer-464407

• Difficulty accessing 1 remote desktop when connected with VPN

  Hello world

  I have an ASA 5505 and have a problem where when I connect via VPN, I can RDP into a server using its internal address but I can't RDP to another server using its internal address.

  One that I can connect to a an IP of 192.168.2.10 and I can't connect to a a 192.168.2.11 on 3390 port IP address.

  The two rules are configured exactly the same except for the IP addresses and I can't see why I can't connect to this server.

  I am also able to connect to my camera system with an IP on port 37777 192.168.2.25 and able to ping any other device on the network internal.

  I also tried ping he and Telnet to port 3390 without success.

  Here is the config.

  ASA 4,0000 Version 1

  !

  !

  interface Ethernet0/0

  switchport access vlan 3

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  switchport access vlan 2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan2

  nameif inside

  security-level 100

  IP 192.168.2.2 255.255.255.0

  !

  interface Vlan3

  nameif outside

  security-level 0

  10.1.1.1 IP address 255.255.255.0

  !

  passive FTP mode

  clock timezone IS - 5

  clock to summer time EDT recurring

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the OWTS-LAN-OUT object

  10.1.1.10 range 10.1.1.49

  network of the OWTS-LAN-IN object

  Subnet 192.168.2.0 255.255.255.0

  service of the RDP3389 object

  service destination tcp 3389 eq

  Description of DC

  the object SERVER-IN network

  host 192.168.2.10

  network of the SERVER-OUT object

  Home 10.1.1.50

  network of the CAMERA-IN-TCP object

  Home 192.168.2.25

  network of the CAMERA-OUT object

  Home 10.1.1.51

  service object CAMERA-TCP

  Service tcp destination eq 37777

  the object SERVER-Virt-IN network

  Home 192.168.2.11

  network of the SERVER-Virt-OUT object

  Home 10.1.1.52

  service of the RDP3390 object

  Service tcp destination eq 3390

  Description of VS for Master

  network of the CAMERA-IN-UDP object

  Home 192.168.2.25

  service object CAMERA-UDP

  Service udp destination eq 37778

  the object OWTS LAN OUT VPN network

  subnet 10.1.1.128 255.255.255.128

  the object SERVER-Virt-IN-VPN network

  Home 192.168.2.11

  the object SERVER-IN-VPN network

  host 192.168.2.10

  the object CAMERA-IN-VPN network

  Home 192.168.2.25

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  implicit rule of access-list inside1_access_in Note: allow all traffic to less secure networks

  inside1_access_in of access allowed any ip an extended list

  outside_access_in list extended access allowed object RDP3389 any host 192.168.2.10

  outside_access_in list extended access allowed object RDP3390 any host 192.168.2.11

  outside_access_in list extended access allowed object CAMERA TCP any host 192.168.2.25

  outside_access_in list extended access allowed object CAMERA UDP any host 192.168.2.25

  pager lines 24

  Enable logging

  exploitation forest-size of the buffer 10240

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  local pool RAVPN 10.1.1.129 - 10.1.1.254 255.255.255.128 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT static destination SERVER-IN-VPN SERVER-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN

  NAT static destination of CAMERA-IN-VPN VPN-IN-CAMERA (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN

  NAT static destination of SERVER Virt-IN-VPN-SERVER-Virt-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN

  !

  network of the OWTS-LAN-IN object

  NAT dynamic interface (indoor, outdoor)

  the object SERVER-IN network

  NAT (inside, outside) Shared SERVER-OUT service tcp 3389 3389

  network of the CAMERA-IN-TCP object

  NAT (inside, outside) static CAMERA-OFF 37777 37777 tcp service

  the object SERVER-Virt-IN network

  NAT (inside, outside) Shared SERVER-Virt-OUT 3390 3390 tcp service

  inside1_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 10.1.1.2 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.2.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP

  DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  Terminal registration

  name of the object CN = SACTSGRO

  Configure CRL

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.168.2.0 255.255.255.0 inside

  Telnet timeout 15

  SSH 192.168.2.0 255.255.255.0 inside

  SSH timeout 5

  SSH version 2

  SSH group dh-Group1-sha1 key exchange

  Console timeout 15

  dhcpd auto_config inside

  !

  a basic threat threat detection

  statistical threat detection port

  Statistical threat detection Protocol

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  username admin privilege 15 xxxxx encrypted password

  attributes of user admin name

  VPN-group-policy DfltGrpPolicy

  type tunnel-group CTSGRA remote access

  attributes global-tunnel-group CTSGRA

  address RAVPN pool

  IPSec-attributes tunnel-group CTSGRA

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:0140431e7642742a856e91246356e6a2

  : end

  Thanks for your help

  Ok

  So, basically, you set up the router so that you can directly connect to the ASA using the Cisco VPN Client. And also, the goal was ultimately only allow traffic to the LAN through the VPN Client ONLY connection.

  It seems to me to realize that you have only the following configurations of NAT

  VPN Client NAT0 / free of NAT / identity NAT

  the object of the LAN network

  Subnet 192.168.2.0 255.255.255.0

  network of the VPN-POOL object

  subnet 10.1.1.128 255.255.255.128

  NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL

  The NAT configuration above is simply to tell the ASA who don't do any type of NAT when there is traffic between the network 192.168.2.0/24 LAN and VPN 10.1.1.128/25 pool. That way if you have additional hosts on the local network that needs to be connected to, you won't have to do any form of changes to the NAT configurations for customer VPN users. You simply to allow connections in the ACL list (explained further below)

  Failure to PAT

  object-group network by DEFAULT-PAT-SOURCE

  object-network 192.168.2.0 255.255.255.0

  NAT automatic interface after (indoor, outdoor) dynamic source by DEFAULT-PAT-SOURCE

  This configuration is intended just to replace the previous rule of PAT dynamic on the SAA. I guess that your router will do the translation of the ASA "outside" IP address of the interface to the public IP address of routers and this configuration should allow normal use of the Internet from the local network.

  I suggest you remove all other NAT configurations, before adding these.

  Control of the VPN clients access to internal resources

  Also, I assume that your current VPN client is configured as full Tunnel. In other words, it will tunnel all traffic to the VPN connection, so that its assets?

  To control traffic from the VPN Client users, I would suggest that you do the following

  • Set up "no sysopt permit vpn connection"
    • This will change the ASA operation so that connections through a VPN connection NOT allowed by default in order to bypass the ACL 'outside' interface. So, after this change, you can allow connections you need in the 'outer' interface ACL.
  • Configure rules you need for connections from VPN clients to the "external" ACL interface. Although I guess they already exist as you connect there without the VPN also

  I can't say this with 100% certainty, but it seems to me that the things above, you should get to the point where you can access internal resources ONLY after when you have connected to the ASA via the connection of the VPN client. Naturally take precautions like backups of configuration if you want to major configuration changes. If you manage remotely the ASA then you also also have the ability to configure a timer on the SAA, whereupon it recharges automatically. This could help in situations where a missconfiguration breaks you management connection and you don't have another way to connect remotely. Then the ASA would simply restart after that timer missed and also restart with the original configuration (as long as you did not record anything between the two)

  Why you use a different port for the other devices RDP connection? I can understand it if its use through the Internet, but if the RDP connection would be used by the VPN Client only so I don't think that it is not necessary to manipulate the default port 3389 on the server or on the SAA.

  Also of course if there is something on the side of real server preventing these connections then these configuration changes may not help at all.

  Let me know if I understood something wrong

  -Jouni

• Can't access calendar on desktop

  I always had gadgets on my desk.  There are a few days the calendar cleared, and I can't turn it back on.  Help!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  or ask in the correct forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop?page=1&tab=all

• RDP has stopped working on Win7 incorporated after the restart, but I can't access the remote via VNC viewer

  Hello.

  I restarted yesterday a machine resulting in RDP no longer works.

  I can access via VNC viewer.

  Any idea that it might be?

  BR

  Rudi.

  Use telnet.exe to know if port 3389 is always on the host computer. Start on the host of the RDP, then go back to your own machine.

• RA-tunnel upward, but can not access to remote resources

  The VPN client connects successfully to the PIX, but it does not appear that all traffic through the tunnel.  There is a tunnel from site to site, which works very well, it's just the stuff of RA that doesn't.  He had worked at some point and then stopped.  This is a sanitized config:

  :
  6.3 (3) version PIX
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the password *.
  passwd *.
  name of host depot-pix
  domain.local domain name
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  No fixup not protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  name 2.2.2.2 cottage-pix
  Server1 name 192.168.0.3
  name 192.168.0.4 Server2
  vpn ip 192.168.0.0 access list permit 255.255.255.0 192.168.10.0 255.255.255.0
  vpn access list allow icmp a whole
  vpn ip 192.168.0.0 access list permit 192.168.30.0 255.255.255.0 255.255.255.0 sign
  access list permit ip 192.168.0.0 split tunnel 255.255.255.0 192.168.30.0 255.255.255.0
  access-list acl_out permit icmp any one
  acl_out tcp allowed access list any interface outside eq https
  acl_out tcp allowed access list any interface outside eq 9333
  pager lines 24
  opening of session
  monitor debug logging
  debug logging in buffered memory
  ICMP allow any inaccessible outside
  Outside 1500 MTU
  Within 1500 MTU
  IP 1.2.3.4 address outside 255.255.255.248
  IP address inside 192.168.0.1 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP local pool vpnPool 192.168.30.10 - 192.168.30.20
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access vpn
  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
  public static tcp (indoor, outdoor) interface smtp server1 smtp netmask 255.255.255.255 0 0
  public static tcp (indoor, outdoor) interface 5989 192.168.0.2 5989 netmask 255.255.255.255 0 0
  public static tcp (indoor, outdoor) interface https server1 https netmask 255.255.255.255 0 0
  public static tcp (indoor, outdoor) interface 9333 server2 9333 netmask 255.255.255.255 0 0
  Access-group acl_out in interface outside
  Route outside 0.0.0.0 0.0.0.0 1.2.3.5 1
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  RADIUS Protocol RADIUS AAA server
  AAA-server local LOCAL Protocol
  RADIUS protocol AAA-server raAuth
  raAuth AAA-server (host server1 secretkey timeout 5 inside)
  RADIUS protocol local AAA server
  Enable http server
  http 192.168.0.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set strong esp-3des esp-sha-hmac
  Crypto-map Dynamics 20 set transformation-strong dynMap
  map OutsideMap 10 ipsec-isakmp crypto
  card crypto OutsideMap 10 is the vpn address
  card crypto OutsideMap 10 set counterpart cottage-pix
  map OutsideMap 10 game of transformation-strong crypto
  map OutsideMap 20-isakmp ipsec crypto dynamic dynMap
  card crypto client OutsideMap of authentication raAuth
  OutsideMap interface card crypto outside
  ISAKMP allows outside
  ISAKMP key * address cottage-pix netmask 255.255.255.255
  ISAKMP nat-traversal 20
  part of pre authentication ISAKMP policy 9
  ISAKMP policy 9 3des encryption
  ISAKMP policy 9 sha hash
  9 1 ISAKMP policy group
  ISAKMP policy 9 life 86400
  part of pre authentication ISAKMP policy 20
  ISAKMP policy 20 3des encryption
  ISAKMP policy 20 chopping sha
  20 2 ISAKMP policy group
  ISAKMP duration strategy of life 20 86400
  vpngroup address vpnPool pool remoteAccess
  vpngroup dns-server server1 remoteAccess
  vpngroup remoteAccess wins-server server1
  vpngroup remoteAccess by default-field domain.local
  vpngroup split-tunnel remoteAccess split tunnel
  vpngroup idle time 1800 remoteAccess
  remoteAccess vpngroup password *.
  management-access inside
  Console timeout 0
  dhcpd outside auto_config
  Terminal width 80
  Cryptochecksum:9f8a7e0796962279858931db84e4e14a
  : end

  Hello

  Want to send traffic destined to remote clients, through the tunnel from Site to Site.

  The recommendation is to use a different ACL for nat0 and crypto ACL.

  Federico.

• How can I access the Documents and settings folder in Windows 7?

  Been searching the Internet for solutions, but found nothing.

  Documents and Settings is not a real issue, and it contains all of the files.  It's a point of junction : a hidden and protected operating system file that is present for compatibility with some older programs.  He points to the real user C:\Users folder. Boulder computer Maven
  Most Microsoft Valuable Professional

• I use vista home premium.i am the only user. In windows update, change the settings, I noticed information as "some settings are managed by your system administrator" under updates important, I can not access or change the settings.

  recently, I tried to change the reg key by going to "HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWS UPDATE\AU" in the right panel, I changed my reg AUoptions value to 0.

  I'm using norton 360 (ver 2.5.0.5) .no other norton is installed.my subscription will be emds after 865 days.
  
  UH - huh. You have 2¼ ~ years remaining on an N360 2009 subscription. I see.

  In this case, the Symantec Support should be able to help you eliminate the hijackware infection which is causing your problem.

  Good luck!

• 2 remote computers can access a host at the same time using using XP Remote Desktop?

  We have the situation where we have an industrial computer on a remote XP operating site.  Can we use the remote desktop of XP for both client computers to access this host at the same time?  There are only two client computers to look at the screen.

  Thank you

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the XP of Windows IT Pro. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Connection remote desktop has appeared in my Start menu, but I don't use it, does that mean someone else has had access?

  I sat down at my computer today (I'm the only person who uses it) and pulled the top of the start menu. There were four programs listed there that I have not used for several months:

  Remote Desktop connection
  Dreamweaver MX
  Freehand MX
  MS Office Picture Manager

  In my opinion, that means that someone had access to my system.

  Can I change my remote desktop connection to protect against this, or is a more complete analysis of my machine required?

  The remote desktop connection settings include providing everyone the read and Read & Execute access. If I remove these options that will make me safer? Skype uses this access (this is the only thing that could, I think I use)?

  I went to system properties and remote access disabled.

  Windows 7 Home Premium, Service Pack 1

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you need information from remote desktop connection settings in Windows 7. I will certainly help you in this matter.

  Please visit the links.

  Remote Desktop connection

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-in/Windows7/what-types-of-Remote-Desktop-connections-should-i-allow

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.