I can't access the administration user who has local administrator controls and everything that happens is my username at the start who has administrator rights but permissions administrator space

Similar Questions

• When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.

  When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.  What is an intrusion to avoid?  It is possible to access the Microsoft defrag utility?

  Glen, have you ever tried to download Diskeeper?

  If so, he may have added something on your computer for access to defragment.

  You're going to start > all programs > Accessories > system tools > Disk Defragmenter and obtaining the pop-up window?

  Check in Add/Remove programs and see if something diskeeper is installed then uninstall it.

  Post back with more information, make and model of the pc, current anti-virus, browser and operating system and the service pack.

  also:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  After back with the results.

• Windows 8 shows a purple screen flashing after the start. I can't access the start menu and the desktop... How can I fix it?

  It worked fine for a day. Then this happened.

  Mine 8.1 flicking of screen between the office and purple screen constantly, occurred because of a Windows update that is has happened when I wasn't paying attention.

  I just went into recovery menu taking into turning computer turned off and before you turn on the computer, press and hold the F8 key

  -Press F8 all the time until the "Please wait" is displayed on your screen

  - Then it will say recovery

  -See Advanced repair options

  Were able to:

  -Troubleshooting

  -Advanced options

  -System restore

  I chose a restore date before that I did my last windows update and then flew it worked.

  Then I created a good restore point and reinstalled the update and everything was fine. I hope this helps someone.

  I guess the update got initially interrupted either by loss or hiccups in the Wi - Fi or DSL and something do not go right.

• How to access the start menu? F10 is ignored. ESC is ignored.

  I have a HPE175z running a new installation of Windows 7 Home Premium.  I want to change the startup parameters.  When the system boots, the screen tells me that < F10 > give me access to the configuration.  F10 is completely ignored.  A message tells me later < ESC > will give me access to the Start Menu. < ESC > is also ignored.  Similarly, I have try all the keys are ignored - nothing interrupts the boot sequence.  How can I access the start menu?

  The problem is that no key during the boot stopped the boot process and allowing me to enter the installation or startup configuration.  I swapped keyboards and the problem disappeared.  Apparently, the keyboard did not have during the boot sequence.

  Thanks to all those who had a suggestion.

• Cannot access the Start Menu - 6 Ultra

  I realize there are other threads on this problem but mine is a little diiferent.

  I just replaced memory in both my Ultra 6 s. The steps were:

  Ultra unit has

  Deletion of records

  New memory installed

  A run the memory test (past)

  Replacement discs

  Fact

  Ultra B

  Deletion of records

  New memory installed

  Could not access the Start Menu to run a memory test.

  Shared memory of unit A and B of the unit (with 'good' memory)

  Could not access the Boot Menu

  Blank placed in drive B and turned on.

  Could not access the Boot Menu

  Disk spent

  Has started doing a factory reset to unit B

  I pulled the plug when I saw "pending RAIDar.

  So it seems to B unit works fine except that I can't access the Start Menu.

  I guess that the reset button does not work on Unit B or is it possibly caused by something else?

  Here is my MAIN question:

  What should I expect when I put the original disks to unit B?

  I noticed that Studio B was assigned to a new IP address, so I'm a little unsure of what to expect.

  Ah, that could be just a bad reset button.

• I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Can't access the link of privilege manage even for the administrator

  Hello

  In the link 'Manage privilege' by mistake I denied "Authenticated users" to access to the Administration.

  Thus, even the Admin user cannot see the link "Administration-> Manage privilege."

  Is there a way I can grant "Access to Administration" for "authenticated users"? so I can see the link "Administration"?

  Thank you and best regards,

  NN

  try to access the link directly as a http://localhost:9804/analytics/saw.dll?PrivilegeAdmin and then restore the permissions you did

• I can't access the files under a specific user name, no password

  original title: access files

  Received the infamous "blue screen" error  Installed new hard drive and Windows XP Pro.  Installed old drive "blue screen" in a "pregnant" so I could access the files.  Only problem is that I can't access the files under a specific user name, no password.  All of the suggestions.

  In a situation like yours, you need to "Take Ownership" files that you can access on your old disk:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• I can't access the section of customize notification area. When I click the button nothing happens.

  I can't access the section of customize notification area.  When I click the button nothing happens.  It is also the same thing when I try to access it through the control panel.

  Hi Mpnieland,

  ·         Were you able to access the section Customize notification before?

  You can try the following steps and check if it solves the problem.

  Method 1: Try to boot in safe mode and check if you can access the section Customize.     You can check the link below.

  Start your computer in safe mode

  Method 2: Try to start the clean boot and check if help. See the article in the link below to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  • Click Start, type msconfig.exe in the Start Search box and press ENTER.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • On the general tab, click the Normal startup option, and then click OK.
  • When you are prompted to restart the computer, click on restart.

  Method 3: You can try to create a new user account and check if the problem is solved in it.

  To create a user account follow the steps below:

  • Open a user account by clicking on the Start button, select Control Panel, click user accounts and family safety, and then click user accounts.
  • Click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • Click create a new account.
  • Type the name that you want to assign to the user account, click the account type, and then click create an account.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information helps.

• I can't access the power options, it keeps telling me "your power plan information isn't available. access denied. "

  SO CONFUSED!  Administrator account... access denied... why?

  I'm the only user on my laptop and I have an Administrators account, but it won't let me change some settings. I can't access the power options, it keeps telling me "your power plan information isn't available. access denied. " How is this possible since I am the administrator? Seriously... can im confused anyone help me please?

  Is the action close cover one of you are denied access to that?

  This can happen if there is management of a manufacturer of PC running electricity and it has been reported in some Samsung netbooks & others.

  If so, find the 'utility' Samsung Fast start in Samsung program files [in the start menu, all programs files].  Start it and select Disable.  If this option does not exist then just uninstall it in the Control Panel, programs & features.  You will gain full access to your power options & lose anything that this utility does not have one thing that you can't do it yourself.

• Lack the profile can not access the Profile Manager, cannot be continued

  Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...

  I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.

  In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
  • http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
  • < User > /users//Library/Application Support/Firefox/profiles.ini

  See also:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

• I can't access the store online

  Hello.
  I bought a second hand Journe Touch and I can't access the store online. I always get a blank white screen... until I press the botton left corner (where say "Impressum 6.jt1.co"). Arise then something like a web page... but this isn't the virtual store of Toshiba. So my first question is:
  The store still works?
  Thanks in advance.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73051

  Also check if a user account is already registered for this device.
  If it s already registered, you will have to ask Toshiba Virtual Store account Reset
  http://APS2.toshiba-tro.de/KB0/OPT0B03250000R01.htm