I can't create a new disk with unallocated space. What can I do?

Similar Questions

• Drive external hard will appear in disk with unallocated space management

  I pulled a hard drive of a computer that I could not get to the job and installed in a case connected to a working computer and external (to pull the data off the drive until I did something drastic).  The USB mass storage device appears in the Device Manager as works fine but disk management displays the hard drive to be unallocated.  How can I access the data?  If I partition, does it wipe the disc?

  Thank you for your helpful suggestions.

  B

  Well you were right - it wouldn't boot.  But I found the menu of the manufacturer and has managed to erase the partition table and master boot record and join the system recovery program.

  And thanks for the response - it's good to know there are knowledgeable people on willing to help when you're frustrated working on windows _.

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• create a new user with password expire - problem SQL Developer

  Hi people,

  I use RDBMS 11.2.x on Solaris and Linux, and in the face of a problem that I hope someone can help me with.

  Our policy is to create a new account with a temporary password and force them to reset the password at the first login.

  Therefore, I use: "create user < username > identified by < user > password expire...» »

  The problem is that many users use Oracle SQL Developer and do not have access to SQL * more.

  When I user logs in the database for the first time in SQL Developer, he just tells them that the account is locked.

  It does not say the password is expired, and it does not give them a way to change this (that I can find it).

  I'm not familiar with SQL Developer and hoped for someone who has had a similar problem can offer some suggestions.

  Thank you.

  Jim

  Change password dialog is no longer Pop Up after ORA-28001 (password expired) (Doc ID 811736.1)

• When I create a new file with 500px wide by long 500px it appears on my screen like a rectangle.

  When I create a new file with 500px wide by long 500px it appears on my screen like a rectangle. When I go to Image > Image size it still shows the 500 x 500 image and yet is clearly not a square. This also occurs if I try to create a circle, select the ellipse a tool by checking the box so he could make a perfect circle it appears as an oval.

  I have Photoshop CS6 on a macbook.

  Any help would be appreciated, I consider myself decently well informed in Photoshop and I looked in the settings, but I can't seem to understand the issue, happened for awhile now, it is not something unique stroke of luck.

  Thank you.

  Is your on-site pixel aspect ration? Set here the 500 x 500 pixels of image 2:1 format

  

• Need to create a new record with the rules of the takeover bid

  Hi all
  
  I want to create a new record with OPA according to the result value (Service request is valid)
  
  For example
  When the demand for services is valid if
  There are (the activity is valid)
  the activity is valid if
  activity type = 'other '.
  
  Can someone help me how to

  Can you provide a little more information on what you want to do?

  If you want to create an object in, for example, a database based on the results of the OPA assessment or investigation, then that lies outside of the OPA and is usually performed by the client that calls the rules.

  If you want to create an instance of entity within the am Session OPA, then this will be involved custom code. There is an example of this in the OPA 10.2.0 documentation, see: example: enter into instances of entity with an inference listener in policy of Automation Developer Help. It is available online at http://download.oracle.com/docs/html/E20344_01/toc.htm

• Creating a new report with 1 seal import

  Hi all
  
  When I import a discoverer workbook that is already existing I always use the following two options.
  1 update the object
  2. by the identifier.
  
  But more than once, I see that import creates another report with the same name with a 1 on the end of the name of the report to make it unique (being the same owner).
  Whereas, according to my understanding, I think a refresh would crush the report pleased just rather than create a new one with a 1 on the end.
  
  Please advice is there anything that I'm missing when importing the report, so a 1 is not appended to the name of the report, and it should just replace the existing one.
  
  Kind regards
  Shruti

  Hello

  If you look at the properties of the workbook under file-> manage workbooks or files-> properties of the workbook, you will see the identifier of the workbook. If any workbook has the same identifier as the existing workbook the option replace ensure that the workbook is to replace. If the names are different, then a copy will be created.

  You can change the identifier to be the same or must match or the name of the workbook to make sure that a copy is not created if the names are different.

  Rod West

• Creating a new database with the file exporrt

  Hello
  
  
  I am to create a new database with an export file.
  
  
  I have the export file (exp) and the environment put in place (Oracle10g on UNIX)
  
  
  Can you gimme a few guidelines and this lines that I could probably face and again to correct.
  
  
  
  Kind regards.

  Hello..

  Aman has already given a link, to cross.

  Well, as you already have a new environment 10g put in place, create tablespaces and users, (accurate to the source database) with the script from the source database, and then import (imp) the export dump using fromuser touser parameter.

  Anand

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to create a new project with other page with the new version of Muse layouts?

  Hello
  If someone would continue to operate as before with the inadmissible Muse version... is - this posible to have both versions installed? or how to create a new project with other page with the new version of Muse layouts?
  Or how to download third party) 3 different configurations (desktop/tablet/mobile) under the same url with a clean result, like up yet with the Muse does not?

  Thanks for any help,

  Patrick

  Use the new version! What you want to achieve, will work! Go to the 'Page' menu and choose 'Add another Layout' and the missed buttons are in plan view.

• When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  You will need a bigger c. For everything that you can move there will be 10 things, you can't. Software installation puts the huge amounts of information in the Windows Installer on C database.

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• When you try to install Vista, receive the message "this computer hardware can not supported booting from this drive." Disk 0 unallocated space.

  Original title: Disk 0 space unallocated: when I tried to install Windows Vista.

  Unallocated space of disk 0: when I tried to install Windows Vista on my laptop and the screen table "Windows Installer"down I got the important message"hardware on this computer may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu "...

  Name: Disk 0 unallocated space total size 149.0 GB free space 149.0 GB Type: (empty).
  Please tell me what to do, I'm desperate. Thank you!!!

  Hi n m,

  Boot you from the DVD to start the installation, or have you started the installation in the existing version of Windows?

  I would like to know if you want to perform a new installation or an upgrade installation.

  You can not install Windows on an unallocated partition, if you install vista on brand\fresh the new hard disk, you will need to create partitions on the hard disk.

  Method 1:  Format the partition and then try to install Windows Vista.

  Important: The applications on the computer and all data will be lost when you format (New Installation) of the partition.

  Method 2: You can follow the steps mentioned in the article below

  Error message when you try to install Windows Vista on a computer that has initialized the hard drives: "this computer's hardware can not supported booting from this drive.

  http://support.Microsoft.com/kb/925481

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************