I can't get my CD/DVD drive to eject the disc, what should I do?

Similar Questions

• I can't get my internet to open using my wireless connection, what should I check for?

  I can't get my internet to open using my wireless connection, what should I check for?

  Hi RosaSchiroo,

  1. are you able to access internet via wired connection?

  2. have you done any hardware changes or software on your computer before this problem?

  3. you receive an error message or code?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• DVD drive stopped reading the disc

  So I looked dvd movies on my laptop forever and then today when I changed the discs, he wouldn't play the next I put it.  He just stopped suddenly.  I've been using clear fi, if it makes a difference, but it does not work with my media player either.  The drive is listed on my computer... is not only to play a disc more.

  Can someone help me please?  I searched for hours for a solution and I'm going crazy...

  Hi Kathy,

  1 have. what troubleshooting measures you tried to solve the problem?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of CD/DVD drive?

  I suggest you try the steps from the following link:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  I hope this helps. Let us know if you have other problems with Windows in the future.

• eject the disc from the drive USB Super

  Last night I unboxed my new USB Super drive and attached to my MacBookPro. I put in a DVD of registered film and was able to start playing. Then I ejected it by clicking on the disc icon on the desktop, because I was just testing how it connected etc...  Then, I wanted to see if he could save.

  I inserted a blank DVD and he asked me to tell him what to save, but I didn't save. Instead, he presented another option, which was to IGNORE.

  So I clicked on IGNORE. As a result, there was NO ICON ON THE DESKTOP for this drive. And the text to EJECT in menu bar is grey.

  Now I am sitting here with a new USB Super with a blank CD disk stuck in it and am totally IGNORED, I asked, but what I didn't know when I asked to ignore me.

  That's the problem. I disconnected, signed back in, and he has not yet cleared my instructions to ignore. So I can't eject the blank DVD disc.

  Where should I go from here?

  My MacBookPro is the retina, i7, 15 '' running ElCapitan, a model community 2015, I think.  I'm not on it now, but will open it to follow the suggestions for help. I'm a new converted to Apple, computing, coming from Windows, so I need the regular basic directions. Any help is appreciated.

  Five ways to eject a CD or a stuck DVD from the optical drive

  Ejecting the disc stuck can be done in one of the following ways:

  1 restart the computer and after the buzzer, press on and press and hold the

  left button of the mouse until the disc ejects.

  2. press on the button of your keyboard.

  3. click on the button in the menu bar.

  4. press COMMAND-e.

  5. If none of the above works try this: open the Terminal application in

  your Utilities folder. At the prompt enter or paste the following text:

  / usr/bin/drutil eject of

  If this fails, then try this:

  Start the computer in single-user Mode. At the prompt, enter the same command as used above. To restart the computer enter 'reboot' at the prompt without the quotes.

• A100: Can't see my CD/DVD drive

  I uninstalled an unknown version of a program called Daemon tools (earlier this year) one never since my cd-RW/dvd drive has always been does not appear in my computer as if I did not at all a cd/dvd drive!

  I still need to acsess my C drive and any other device I have plugin via USB or whateva. But when I start my laptop, only 1 time in 4 or if my CD-RW/DVD drive appears.
  If I put a CD or DVD in the drive when the icon is not in my computer, nothing happens, and I have not found a solution.
  How can I get my CD/DVD combo drive to work whenever I start?
  -J' have Priofessional of Windows XP service pack 2 Version 2002
  -J' have a program called ' drag ' n drop CD + DVD "like burning software.
  -My computer is a Toshiba A100 with pentium m 1.4 ghz, 496 MB of ram.

  I can't find anything to do with cd/dvd players or drivers in Device Manager. They have completely disappeared. I can't install this again as a "new hardware" because the computer can not find. Maybe I should find a program on the net that can reset my drivers or sumething? My cd/dvd drive does not at all now.

  Any ideas would be greatly apreciated.

  Hi Matthew,

  I'm not familiar with the program Daemon Tools, but the loss of the CD/DVD drive is a known problem when deleting some portable software you.

  The Microsoft Knowledge Base has several artocles on the problem and how to solve it.

  Please visit the following link: -.

  http://support.Microsoft.com/kb/314060/

  Kind regards

• How can I get my CD & DVD return players to be reconised by windows (code 10)

  MY CD/DVD player will not work. Device Manager displays the available readers but with a yellow dot or (!). Then it tells me cannot start code 10. How can I get them back online.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• How can I get my external cd drive to work on my hp ultrabook

  How can I get my external cd drive to work on my hp ultrabook

  Hello:

  In addition to the above, you will need to also go into the BIOS and turn on legacy Mode in order to boot from another device, but the hard drive with Windows 8.

  You may also need to disable secure both boot.

• How can I get my fixed CD drive? Device Manager says "Driver may be corrupted or missing" B

  How can I get my fixed CD drive? Device Manager says 'driver may be corrupted or missing.

  But when I click on update driver it says "your driver is up to date" and refuses to fix it.

  Hello:

  I found this link where a person fixed a similar problem with editing the registry.

  Make sure that you back up all personal files you do not lose to a portable hard drive and create a restore point by using System Restore utility first, because editing the registry might cause some problems with your PC, also do not start and you have to reinstall the operating system.

  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Paul

• where can I get a DX4450 printer driver driver for windows 8?

  where can I get a DX4450 printer driver driver for windows 8?

  I downloaded new driver but still has the error and won't work, any ideas anyone?

  Windows 8 32-bit or 64-bit?

  Did you ask on a forum Epson on what issues you see?

• Can I get a new 2nd drive?

  I bought CS5 and you want to download it to my computer. For some reason any only the first disk will be installed and the second disc will not install due to, I get an error message that indicates the following programs contain errors and may not install. Can I get a new 2nd drive?

  Hello

  Please remember that the serial number is for CS5 or CS5.5 because they are two distinct versions, and there will be two different serial numbers of them.

  You can see,

  Invalid serial number error

  Warning: "Adobe software real failure of Validation...". » | Windows

  Failure audit download or installation. CS6

  If you CS5.5, check and confirm what to see, quickly find your serial number

  Download from: Download CS5.5 products

  Let us know if that helps.

  Kind regards

  Bani

• drive hard MacBook is deleted and can't get out disk to install a new operating system is possible to eject the disc?

  My hard drive died yesterday and I have installed a new. I put a disc with arch linux in the laptop but it does not load and the eject button does not work. Is there another way to eject the disc?

  Hold down the mouse button while you start. The drive will attempt to eject.

• Can I get a professional XP disk and install the OS individually on each computer (they have all their key codes), or do I have to find another way?

  I bought a bunch of desktop computers that came with XP Professional with IBM. I ordered the reinstallation disc, but it worked on one of my computers. Can I get a professional XP disk and install the OS on each individually (they have all their key codes), or do I have to find another way? I don't have the money to buy the recovery for each computer disk.
  IBM ThinkCentre

  Pentium 4 3.0ghz

  512 MB of ram

  hard drive 40 GB

  XP Professional

  As long as the disc you are using is the exact same OEM disc that would be provided by IBM that would work on these computers. It cannot be a copy in the Windows retail.

• My dvd drive opens at the beginning and will not be closed.

  My dvd drive opens at the beginning and will not be closed. How can I solve this problem?

  Hi Showme66,

  A. from when what happens?

  B. what happens when you try to close the drive?

  C. recent changes made on the computer?

  D. the DVD drive opens automatically at startup?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

  Please post back the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• How can I get Dreamweaver to download my project on the backend?

  Hello

  I am trying to load my intrAnet project on the primary server.  I need advice on how to do it.  I'm really new to this aspect of web design.

  Here is the information that could be useful to help you guide me.

  I create my project that includes all the files on my C: drive.  It works fine with Internet Explorer on my computer.

  This project must now be transferred to the main server that is visible to all who have access to the IntrAnet.

  I have the URL were I need to move the project, but I can't move the project there.

  How can I get Dreamweaver to download my project on the backend?

  If you need more information, let me know, I'll give you.

  Thank you.

  Have you defined the site yet? This transfer method that you use to copy the files from your local PC to your web server location?

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.