I can't install Microsoft. NET Framework 4.0 because of the error (0xC8000222)

Similar Questions

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• try to install microsoft net framework 2.0 service pack 2

  I was in microsoft.com site but can't find a download for this the only download I can find are for 64 bit and 86 bit version wont work with my windows XP PROFESOAL I HAVE 32 BIT VERSION CAN someone please until ME WHERE to DOWNLOAD if IT GERARDINE to DETERMANATION AND PAITENCE I GIVE UP THE PROGRAM BUT I DOWNLOADED needs THIS FRAMEWORK TO WORK SAID ITS IN MICROSOFT WEB SITE BUT CANT FIND IT thank you.

  Hi BITYH DROPPED,

  Here is the link for. NET Framework 2.0 Service Pack 2. 32-bit is also referred to as x 86 versions of Windows.

• I can't install vista service pack 2. I get the error code 80070490.

  whenever I try to install service pack 2 for Vista Home premium, I get the error codes. first I get the error code 80070646. I did what it said to do, install microsoft fix and he ran. Fixed a number of things then I try to install the service pack again after that, he goes further, to halfway through the installation, then code 80070490 error rises. don't know what to do next. Windows vista home edition premium is preinstalled on my computer.

  Hello

   
  (1) were there any changes on the computer before this problem?
  
  I suggest you follow the methods mentioned below.
  Method 1: If the problem persists, see the link below to run the automatic troubleshooter.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2: Follow the steps from the link below.
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
   http://support.Microsoft.com/kb/976920
  
  Method 3: Download Service pack 2 standalone package and try to install.
  For Vista 32 - Bit:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
  For Vista 64-bit:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=656c9d4a-55EC-4972-a0d7-b1a6fedf51a7&displaylang=en
   
  For more information, see:
  
  You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044
  
  Note: Back up all your data before you run the repair facility.
  Note: A repair installation will not damage files and applications that are currently installed on your computer.
   
  Hope this information is useful.

• I can not install updates KB973593, KB973704, kb974561, KB975960 I get the error code 646 #! In addition, Microsoft IATAP adapter #5 ROOT\ * ISATAP\0007; #7\0008; 9\0011 # device does not not impossible to load the required driver.

  The program that I have problems with, install my updates, they moved it and I get an error code 646 #. I tried to fallow the guide to fixing the problems to solve the problem though, everything I've read and tried did not work! I have plenty of room for my memory and now I'm stuck! In addition, my adapter from microsoft IATAP #5 Root\ ISATAP\0007; Microsoft IATAP adapter #7 Root\ISATAP\0008 and IATAP microsoft adapter 9 # 0011 Root\ISATAP\ these 3 devices not working properly because windows cannot load the driver for this device, and I don't have a clue on what and how to solve this problem at all. "Were the changes that I made, I started using Mozilla Firefox 3.5.3 for my internet conection and I installed two programs (1) speed of Uniblue SN 2009 and (2) Uniblue Registry Booster 2010 both programs are by Uniblue Systems. CTA Neather program worked as they said that if I uninstslled them and after that there about 2 weeks later I noticed that my updates of the program did not work. , or if these device IATAP drivers worked! I tried the system repair and recovery, which also does not solve the problem. I have a Toshiba Satellite A215 laptop 2.00 GB and my OS is; Microsoft Windows Vista Home Premium, Patch level; Service Pack 2. I'd appreciate any help to fix these problems that I'm having with these programs and drivers, I know just enough about computers to really screw things. Please I need a step by step instruction.

  Thank you

  Keith

  I had to disable the "User Account Control" (UAC), which allows you to run as administrator in Vista.  After that I turned it off, all 4 of these updates installed and it doesn't require manual installation.   Follow these steps:

  In the case of Vista view:

  1.) go to start; Control Panel; "User accounts and family safety"; User accounts.
  2.) click on 'Enable user account control or disable' (last point on the page)
  3.) clear the checkbox "Use User Account Control (UAC) to help protect your computer" and click "OK."
  4.) restart the computer, and then run the installation of the system and they work.

  If you are in Classic view:

  1.) go to start; Control Panel; Security Center
  2 screen.) in the "Windows Security Center", go to the last item "User Account Control" and click the button to turn off.

  You can also see the security shield in your Start menu.  You can also access the UAC via this.

  After that the installation of the system have been updated, make sure that you go back and turn the UAC "" and then restart your computer so that unauthorized updates do not occur.   Always try this turn off if install doesn't work.

• problem install microsoft net.framework1.1

  I can't install microsoft net.framework1.1 on my computer.  I have windows vista 64-bit.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Norton deleted and Microsoft .NET Framework - why security search bar? When these extensions available for Firefox 4? How can I go back to the previous version?

  After having downloaded and installed the new Firefox 4.0, I learned 2 extensions could not be installed. A notice would monitor the compatibility and availability and would notify me when those extensions are available. So who's going to happen, I prefer to use Norton Security when searching on the web and don't know what did Microsoft NET Framework, so don't know how important it is.

  Symantec needs update their Firefox Add-ons to make them compatible with Firefox 4. They indicated that, for Norton 360, they plan to release a update of Norton 360 to support Firefox 4 in early may - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web & docurl = 20100720113635EN & ln = en_US

  I don't know about the time scale for the updates for other Norton products. Waiting for the update by Symantec, if you want to use Norton modules, you will need to downgrade to Firefox 3.6.

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

  Module additional Microsoft NET framework also supports ClickOnce, I never found any need.

• Update to Microsoft Net framework 3 service pack 2 can I keep the 'old' or do I have to uninstall the

  • I have Windows XP Home Edition and I update through the Download Center.  I don't know whether to keep old service pack or not when the new ones are installed.

  * original title - when updated to service pack 2 for Microsoft Net framework 3 can I keep the 'old' or should I uninstall them. I have Windows XP Home edition. Thank you *.

  If you refer the download files, keep the incase you ever need to reinstall .NET that some of them may be prerequisets for future updates or service packs.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I try to install peachtree and I got a pop up saying that peachtree acct could not be started because of microsoft Net Framework 3.5 SP1 is missing or damaged.

  Help!

  I try to install peachtree for my online acct 110 class and I got a pop up saying that peachtree acct could not be started because of microsoft Net Framework 3.5 SP1 is missing or damaged. Would you lide to read the instructions for the installation of .net online now? I said yes and did, but was told by Deputy peachtree, after that it wasn't that I maybe shouldn't do that because my laptop has the circle start button in the lower left corner and has something to do with the hard drive. I don't know, but am trying to get this peachtree 2012 to work so I can start my classes. Can someone help me please?

  RB_844

  Because it was blue

  In control Panel- programs

  Select uninstall programs

  Select Windows turn features on or off in the menu on the left side of the screen

  Uncheck the box next to Microsoft .NET Framework 3.5.1

  Click OK

  Restart the PC

  In control Panel- programs

  Select uninstall programs

  Select Windows turn features on or off in the menu on the left side of the screen

  Check the following Microsoft .NET Framework 3.5.1

  Click OK

  Restart the PC

  Run Windows updates

  Check if the problem persists

• Microsoft NET Framework 1.0 error when installing Corel PaintShop Photo Pro X 3.

  OT: NET Framework 1.0
  I installed Corel PaintShop Photo Pro X 3.  It downloaded from the disc successfully but I cannot open the creation project. Windows I says error hae a Microsoft NET Framework 1.0.     When I try to open the program (Corel) I get a message that the application has generated an exception that could not be treated.  No registered JIT debugger was specified.  Other programs on the disc open OK.

  Salvation by the Lake.

  1. what operating system do you use?

  I suggest you to ask your question in the form below for better support.
  http://www.Corel.com/servlet/satellite/us/en/content/1152796555474

• Securty update for microsoft net framework on windows xp Server 2008 x 86 {2572067} 1.1sp1 could not be installed

  tried several times ms11-078 security bulletin

  Hi johnhayes003,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you install the update?
  3. You are able to install some other updates on the computer?
  4. You have security software installed on the computer?

  Method 1

  I suggest that reset you Windows Update for default components and try to install the update, check if it installs properly.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails then I would suggest that you manually download and install the update.

  Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

  http://www.Microsoft.com/download/en/details.aspx?ID=27715

  If the previous step fails then I would suggest see you the update history for the complete error message related to the failure of the update and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• What is Microsoft NET Framework programs and I can uninstall to get space, or are they important to the operating system and my pc works?

  Microsoft NET Framework programs are indicated with a number in the box sizes when I go to the dialog box to uninstall but I don't know what they are and as they have Microsoft and NET in the titles, I think twice about uninstalling to win space in case they are something important. I have no idea what it is, never use it and if I don't need it would uninstall but I'm not sure I should because it might be important and actually run in the background while I use the pc for other tasks. Someone knows and can explain what are these programs? I appreciate it and appreciate help for an admitted car computer illiterate full below all new novice owner, trying to get the hang of it, but I'm trying! Thank you!

  .NET framework components are required by many programs to work. They provide common functions for them.

  http://en.Wikipedia.org/wiki/.NET_Framework

  Why do you need to "save space"? Programs do not take a lot of space given the size of modern readers. The values shown in programs and features, are unfortunately often inaccurate.

  If you are new to computers, avoid changing the way Windows is set up. It's the surest way to cause you problems. Relax and enjoy using the programs you like instead of worrying about what's going on under the hood.

• How can I get my Microsoft Net framework version 2.0 on my computer it say it s missing

  WHENEVER I TURN ON MY COMPUTER IT SAY IS MY MICROSOFT NET FRAMEWORK VERSION 2.0 IS MISSING, HOW DO I PUT IT BACK ON MY COMPUTER?

  Hello

  According to the description, it seems that you get an error message that .NET Framework 2.0 is missing. I'll be happy to help you with this problem.

  I suggest you to follow the steps suggested by "YiChun Chen" and check if the problem persists.

  http://social.msdn.Microsoft.com/forums/en-us/netfxsetup/thread/fd1938c4-5771-4E51-bde0-1bafaf49c7e6/
  It will be useful.

• Error code 66 is to update security for Microsoft NET Framework 4 on Windows Vista (KB2160841)

  When you try to install the update of security for Microsoft NET Framework 4 on Windows Vista (KB2160841) I get an error 66 a code, I can't identify the problem, I tried to install this update for some time (of the month) any other facility of updates without problem.

  Take a look at this:
  Windows update error .net framework 4 will not update - 66A error code
  http://social.msdn.Microsoft.com/forums/is/netfxsetup/thread/02b7b01f-2a04-4352-AFEB-3a5250ebe0ef
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I keep trying to update microsoft net framework, but it keeps not having an unknown error what I do? __

  I have attached all over, but I can't get an answer

  Download and run according to .net cleanup tool
  Cleaning of all versions of the .net framework from the computer.
  Then install the .net Framework by downloading it from the Microsoft Web site