Error code 66 is to update security for Microsoft NET Framework 4 on Windows Vista (KB2160841)

Similar Questions

• Securty update for microsoft net framework on windows xp Server 2008 x 86 {2572067} 1.1sp1 could not be installed

  tried several times ms11-078 security bulletin

  Hi johnhayes003,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you install the update?
  3. You are able to install some other updates on the computer?
  4. You have security software installed on the computer?

  Method 1

  I suggest that reset you Windows Update for default components and try to install the update, check if it installs properly.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails then I would suggest that you manually download and install the update.

  Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

  http://www.Microsoft.com/download/en/details.aspx?ID=27715

  If the previous step fails then I would suggest see you the update history for the complete error message related to the failure of the update and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• fix for Microsoft net framework 3.5 sp1 for windows 8

  I'll install the 13 ansys software in windows 8. I have problem that it asks to fix microsoft net framework 3.5 sp1, the fix for microsoft net framework 3.0 SP2, hotfix from microsoft net framework 2.0 Service Pack 2. What should you do? Please help me.

  To me, he is asked for 3 different patches.
  MS. NET Framework 2.0 SP2 patch
  MS. NET Framework 3.0 SP2 patch
  MS. NET Framework 3.5 SP1 patch

  Where to get these fixes for windows 8?

• Error code: 0x8007066F when you try - updating security for Microsoft Office 2007 System (KB973704)

  When you try to install

  Update of security for Microsoft Office System 2007 (KB973704) I keep receivingError Code: 0x8007066F
  How can I fix this so I can install the update?
  Thanks for any help

  0x8007064C & 0x8007066F

  This problem may occur if Windows Update or Microsoft Update cannot locate the downloaded update.

  Error code when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0x8007064C.
  http://support.Microsoft.com/kb/958055

  or download the patch for your system and install manually.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c4c92d2e-e87d-446F-8d3e-8f4be10c70aa

  See also: http://support.microsoft.com/kb/973704

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.

• Windows Update error Code: KB972581, update security for Microsoft Office System 2007

  Here's the situation:

  My operating system is Windows 7 but Windows Update (KB972581) for updating security for 2007 Microsoft Office System has been designed for Windows Vista, to research and it continues to display for me to update. Now, the deal is that when I update and download the update tells me that the update is not for the system... CAN ANYONE HELP?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to update security for Microsoft Office 2003 (KB2584052)

  I have six updates to security for Microsoft Office 2003 that is (KB2584052) and they always fail.

  Any advice?

  Hi SteveGjorkes,

  ·         Do you receive an error message/code?

  ·         Did you do changes on the computer before the show?

  ·         You are able to install some other updates without any problems?

  Before windows updates, follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Restart the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  http://www.Microsoft.com/download/en/details.aspx?ID=27390

  Method 4: Reset windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 5: Follow the steps in the article.

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Impossible to solve problems with the update of security for Microsoft NET. Framework SP1 (KB2657424)

  I hope that Microsoft Support will answer this question:

  Homepage of Microsoft Windows Update is re - download and reinstall the same update (KB2657424).

  I was advised to try this link: https://support.microsoft.com/oas/default.aspx?gprid=6527 and it brought me to this page.

  I downloaded Microsoft Fixit 50202, installed and ran, but in "default" mode, since he warned that "aggressive mode" may disrupt other updates.

  It took me 8 hours (using a dial-up access provider) to get through all of the suggestions, including those in the following links:

  http://support.Microsoft.com/kb/910339

  http://support.Microsoft.com/kb/906602

  http://support.Microsoft.com/kb/2657424

  http://www.Microsoft.com/download/en/default.aspx

  I followed the suggestion of Microsoft to visit their site and check out "Review of my update history". Since January 11, 2012, when Microsoft first downloaded the update to in question (KB2657424), it failed. Microsoft has offered by clicking on the Red 'x' next to the 'update failed' to open the info on the reason that has been...

  Error code: 0x01

  Microsoft proposed the search for this error code in this list:

  http://support.Microsoft.com/ph/6527

  The error code is not in this list.

  Microsoft said then click "find solutions," "enter keywords" and click on "search". The result was this message: "Sorry, no result found not to match this criterion."

  As I mentioned earlier, since the first update "failed", I clicked several times on the icon (almost daily), which reappears constantly in my taskbar, asking me to "Reinstall", the update, and these measures have been recorded at yellow end of Microsoft. As I mentioned earlier, the update of security (KB2657424) is already listed in my Add/Remove programs as being installed. The "update history" reveals that a series of 'success' (KB2657424) facilities are recorded as well as "failures".

  I went to Windows Update Microsoft Web page to 'review my update history'.  After analysis of my PC, Microsoft has determined that (KB2657424) "has been downloaded and ready to install," with another update of IE (KB2618444). So I clicked both for "Quick Installation".

  When you are finished, I revisited the "update history review". (KB2657424) has been disabled with the green icon as 'successful', while at the same time, in the right box next, there was a message: "Install Updates (1).» So I clicked it, and another window open with the message that the "high priority update" (KB2657424) had to be installed. Yet once, I clicked on "Install updates". He ended with another successful window "Update."

  Then I clicked to "review update history", and it was registered under the name "successful." But the window beside her reappears at the same time: "Install Updates (1).» I have has. ... It was the 3rd time within an hour. 3 slices of the same update (KB2657424) are now disabled with the green icon as "successful"... but the window side "House of Windows Update" reappeared again with the same message: "Install Updates (1).»

  Then I followed the suggestion of Microsoft to type in the "run command" keywords to the day windows journal. Since the January updates up until this date in February the journal is 428 pages (transferred from Notepad to Microsoft Word.)

  Then I followed the instructions to download the update 'NDP35SP1-KB2657424 - x 86 .exe' (1.3 MB) directly from Microsoft link... http://www.microsoft.com/download/en/details.aspx?...28569.

  As instructed, I proceeded to manually install it in "Safe Mode".

  The result was this message:

  Patch installation (c:\35b7019bd0df08ac0003ec93627c\NDP35SP1-KB2657424.msp) failed on product (Microsoft .NET Framework 3.5 SP1). MSI log: Microsoft .NET Framework 3.5 - KB2657424_20120209_020143359 - Msi0.txt

  I scanned the PC with anti-virus and anti-malware programs, and none of them found any malware or virus in the way of updates from Microsoft. "The 'update' where it is saved in the Microsoft Download link is the only and unique" ""NDP35SP1-KB2657424 - x 86 .exe." The "Update" as it is installed in my Add/Remove programs in the Control Panel is the same.

  However, both "Windows Update Home" to Microsoft Page as well as in my BONES, the "update" continues to override all commands of Windows. Another odd fact, is that this "update" that keeps re - download and reinstall itself is actually partitioned into three parts, and I wonder if they may be "clones". Maybe the Windows Installer Service does not know where to place them, or what to do with them. These are three:

  MSIPatchRegFix - X 86 .exe_

  NDP35SP1-KB2657424 - 86.exe_

  NDP35SP1-KB2657424 - 86.exeQ

  Hi Jeine,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• Microsoft for Microsoft .NET Framework 1.1 SP1 security update

  When enabled Microsoft update, the following message is received: the following updates have not been installed.  "A security update for Microsoft. NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353.  My operating system is Microsoft Windows XP Home addition.  I tried Microsoft difficulty It Center, which has not corrected the problem. Help

  Hello

  ·         What tool Microsoft Fixit did you run?

  ·         You get an error code?

  ·         You are able to install some other updates?

  Follow these methods and check if that helps.

  Method 1:

  You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged. This article explains how.

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/306160/en-us

  Method 2:

  This describes step by step how to solve problems that you may experience when you install the .NET Framework 1.1 in Windows XP.

   

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/824643

   

   

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=33

   

   

  Method 4:

   

  To install this security update, you must have Microsoft Windows Installer 3.1 or a later version installed on the computer. For the latest version of Windows Installer for the computer, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

   

  See also:

   

  MS09-061: Description of the update of security for the Microsoft.NET Framework 1.1 Service Pack 1:13 October 2009

  http://support.Microsoft.com/kb/953297

• Failed to update security for Microsoft Office Word 2003 (KB2344911)

  I tried to install the update for my PC, then three updates are available, but then I get these messages

  Update of security for Microsoft Office Word 2003 (KB2344911)

  Is it relevant:

  http://support.Microsoft.com/kb/2258121

  You forgot to mention what operating system of Windows that you are using so presume Vista or Windows XP

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.

  If it's Windows XP, visit the Update Web site, and then view your history here.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Could not update security for Microsoft Office 2003 (KB2584052)

  For some reason any my laptop win XP will not install the 'day of security for Microsoft Office 2003 (KB2584052)"someone knows why this will not be installed?

  Hello

  1. Did you of recent changes to the system before the show?
  2. You are able to install other updates to Windows?

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Restart the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  http://www.Microsoft.com/download/en/details.aspx?ID=27390

  Method 4: Reset windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 5: Follow the steps in the article.

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Failed to update security for Microsoft Office PowerPoint 2007 (KB951338) - 80070643 error code

  This update will fail all the time - I tried one of the solution offered by Windows (repair corrupted .NET framework using Microsoft Fix it 50123) but it changed nothing.

  That's why he keeps asking to install the update and even if I did not, when I want to turn my laptop, it forces me to install it-sense, I can't use my turn off button to just go to sleep. Quite boring...

  The real problem, in my view, is that I don't have Office PowerPoint 2007... I recently installed Office 2010...

  How can I get rid of this update or get Windows update to understand that I don't have Office 2007?

  Thanks a lot for helping me on this case.

  Try this FixIt (Microsoft Fix it 50473)

  You receive error code 80070643 0 x or 0 x 643 , error code when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error code 8024200d when installing update security Vista 2296011 KB

  Several updates were issued on 12/10/10-we failed, 2296011 KB.  8024200d error code.  I am running Vista Home Premium 32-bit.

  Thank you.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 800080005 cannot be updated now for almost a year and a half.

  Error code 80080005 help!

  A year and a half?  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The following updates have not been installed: updating security for Microsoft Office Web Components (KB947319)

  I don't get an installation failed message, no code error.
  The update was automatic download through Upfates.
  I have Office 2003 installed Access/Excel/Infopath/Outlook/PowerPoint/Publisher/Word
  OS is XP Professional automatic updates were turned on since day 1
  I can't find any help or support for this error, the KB document document sent me round in circles and suppose get the error codes.

  Hello

  Control Panel - Windows Updates - right click on it and HIDE

  Go here and download and install manually.

  KB947319
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=95c94c9a-6aca-42fb-9679-3234f06c72f7&displaylang=en

  NOTE the system requirements.

  MS09-043: Description of the update for Office 2003 Web Components and Office XP Web Components Security in
  Office 2003: 11 August 2009
  http://support.Microsoft.com/kb/947319

  Then reset the updates:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  -----------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.