I can't install the update on my IPad version to watch TV. I tried all the options, but did not work

Similar Questions

• Re: Satellite A300-243 - updated after the BIOS, it did not work

  Dear members...

  Good day...

  I have a problem with Toshiba Satellite A300-243, I installed the Bios after you download from Toshiba Web site, and when it's over, he restarted the machine and did not work, just turned on.

  So if any body can help me to solve this problem, I'm happy.

  Thank you...

  Hello

  It looks like that the BIOS update has no...

  What can you do now?
  Yourself you can do nothing. The only change is the authorized service provider. Technicians can try to reflash the ROM module

  Sorry mate, but in this case you need professional help.

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect.

  Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.

  I live in Slovakia and I bought this iphone in Florida USA

  Thank you, Maria Nagy

  Any ideas?

• New window opening when the problem of double click even if I haven't changed in folder option but it not worked

  Dear sir\madam

  I am using the windows 7 every time I am double clicking in the drive and the folder open in the new window only. I even changed this option in the FOLDER AND SEARCH option, but it is futile his does not work. Friends by saying: it is a virus. Please help me solve this problem.

  Thanks and greetings

  AURÉLIE

  I am not sure, I've not had the problem myself, but a quick search found this - http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f

  Good reading and see if you think it's the same problem. If so and the choice of folder option certainly does not work for you, there are a few things to try to make up a batch file and it works from a simple sfc/scannow (I have not tried but it is marked as answer).

  It will be useful.

  If you suspect a virus, update your anti-virus software and run a full scan, then download, install, update and run a scan complete with (free) malwarebytes. Just run as free on demand, no need to check for any trial etc.

• Is there currently a Camera Raw plugin for Photoshop CS for the Nikon d-600? tried to download version 7.3, but did not work

  Is there currently a Camera raw plug taking in charge the d-600? I tried to download version 7.3, and it did not work!

  You have photoshop cs (photoshop 8) to 2003?

  If so, what operating system are you using?

  In addition to the upgrade to photoshop cs6 or by subscribing to the creative cloud, you can probably use Adobe's DNG Converter to convert your nikon D600 naves in best dng, which should then open in photoshop cs.

  You must have the 2.4 for DNG camera to work in photoshop cs raw plugin.

• I can't launch the programs installed on my pc! He goes to the downloads, but them not working please help

  I have flight games installed on my pc, I've played. Now when I try to open them, it goes to my downloads; and the download page does not open them. What happens with that. I am running windows 7 ultimate and programs still open to the top of my desk. now, he goes to the downloads and don't open them! I can't even use System Restore as the download page does not recognize the editor. It does not recognize any editor even microsoft.

  I have flight games installed on my pc, I've played. Now when I try to open them, it goes to my downloads; and the download page does not open them. What happens with that. I am running windows 7 ultimate and programs still open to the top of my desk. now, he goes to the downloads and don't open them! I can't even use System Restore as the download page does not recognize the editor. It does not recognize any editor even microsoft.

  using the analysis

  http://www.Malwarebytes.org/ (recommended)

  If you have anti antivirus program update it and run full scan or if you do not get this one:
  AVG Free http://www.avg.com/gb-en/download-free-anti-virus

  Do using the analysis:

  http://www.emsisoft.com/en/software/EEK/ recommended

  You can run it from memory stick too.

  It is recommended to perform all analysis in safe mode.

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Try to clean boot to see which program is causing the problem

  Statement from here

  http://support.Microsoft.com/kb/310353

  Test your windows files

  http://www.bleepingcomputer.com/forums/topic43051.html

  Uninstall programs you don't use or you have installed recently and ut caused the problem

  Please visit my blog for more tips and tricks
  http://safewordwidewebsurfing.blogspot.co.UK/

• Installing the L7680 driver will not work with Windows 8.1

  I recently bought a new HP Pavilion laptop and updated to 8.1 windows not long after the purchase.  I tried to install my Officejet Pro L7680 all-in-one today and not failed on each attempt.  The driver/software will download but when I try to install the software I get a message of "specified file not found."  I called HP and spoke to a representative who informed me that my printer was too old and that it was not compatible with Windows 8.1 System.  He said there was no update available for my printer and basically I have to buy a new printer.  Wrong answer!

  The issue is a file missing in the folder drivers to preload: Msiexec.exe

  Please help me find a way to install my printer

  Hi exumsta

  Yes the anitivirus software could ask questions.

  I'll make sure that it is turned off during installation.

  Here is a url to temporarily disable all the startup programs to see if one of them is causing problems.
  http://theunlockr.com/2012/04/05/How-to-change-Windows-8s-startup-programs/

  You must follow the same steps to reactivate all.

  Let me know how it goes.

• His record game. I can't play the sound. troubleshhoot does not work

  Next to my changer volume, there is a small 'X '. When I go over it with my mouse, it says: "no speakers or headphones are connected ', but the speakers are integrated into my PC, so my monitor. Also, if I click it, it brings up to solve problems, but that does not work either! Any help is appreciated, I can't do that without sound on YouTube!

  Next to my changer volume, there is a small 'X '. When I go over it with my mouse, it says: "no speakers or headphones are connected ', but the speakers are integrated into my PC, so my monitor. Also, if I click it, it brings up to solve problems, but that does not work either! Any help is appreciated, I can't do that without sound on YouTube!

  Have you tried to uninstall and reinstall sound card driver? You may need to visit the manufacturer's Web site to download and install the latest sound card driver.

• Try to install the driver, but will not install correctly, ArcSoft Photolmpression 6.

  Windows 7 no Photofix Copier of Summit, do not to install the driver properly error. Any help for this old surfer of money with the early stages of dementia would be much appreciated.
  Thanks to all who can help.
  Concerning
  TREV

  I think you will find that your Copier, Photfix, is not compatible with win7, according to many other messages from various sites.

  You could try the free trial of http://www.hamrick.com/ but be aware that if it works, and you decide to buy its probably at a cost similar to you buy a compatible scanner.

  BTW, the title line of your post is not really applicable to your question/problem.

• I downloaded the trial but did not use the product due to the upgrade of computer... You can download the trial again and try?

  I downloaded the demo and was unable to judge due to the upgrade of the computer... Download again for the trial?

  You can try to see - the new system could have wiped out the memory on the machine.

  Unfortunately, once installed, the trial is started, so you try while it is there.

• Please help, I've updated my iPad has a few days, but by exploring my camera I discovered that the front camera did not work while the main or back camera is not working properly, please, anyone with a secure solution please share.  Thank you

  I have tried everything that I could even, to the extent where I hard reset my device, but that it does not work, no possible solution please share with me, that I will accept it gladly. Thanks in advance.

  Already restore you factory? If this is not the case, try this. If you have, or it did not help the cause can be hardware partner. Take it to your local Genius Bar or Apple authorized service provider. -AJ

• I can't get the option to scan to work on my HP Officejet 6500 E709 series printer!

  I am running windows 7 on a dell inspiron 570, it runs on the WiFi Lynksys wrt54g router. What I connect with USB during the installation of the software to get all the options to work? The printer display says "No scan option", and I don't have the option in the options of the printer on the desktop.

  It is because you do not have to install the full feature software/driver HP, HP cd or visit their web site and following the instructions for installation of HP

• Media Player 9 does not work after the restoration of the 11 who did not work.

  Have no idea why my WM9 no longer works, so I upgraded to 11 and still not running program.  Restored and now I get

  a message "Has encountered an internal error" when the re - install of WM9.
  Thank you

  You can try using System Restore to before the problem at the beginning: http://support.microsoft.com/kb/306084

  What has changed before the initial problem?
  Have you installed programs, updates or drivers?