I can't get the option to scan to work on my HP Officejet 6500 E709 series printer!
I am running windows 7 on a dell inspiron 570, it runs on the WiFi Lynksys wrt54g router. What I connect with USB during the installation of the software to get all the options to work? The printer display says "No scan option", and I don't have the option in the options of the printer on the desktop.
It is because you do not have to install the full feature software/driver HP, HP cd or visit their web site and following the instructions for installation of HP
Tags: Windows
Similar Questions
-
HOW TO OBTAIN THE DEVICE DRIVER FOR "HP OFFICEJET 6500 E709 SERIES PRINTER?
MY COMPUTER WOULD LIKE TO ADVISE THAT MY PRINTER DOESN'T HAVE THE INSTALLED DEVICE DRIVER? PHYLLIS MASON
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.Try printing HP and Scan Doctor for Windows
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146Good luck, you need to update or reinstall the latest driver.
HP OfficeJet 6500 E709 - drivers<-- select="" model="" and="" then="" you="">-->
Windows
http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%206500%20E709&search_searchtype=s-002HP 6500 E709 - Support & Troubleshooting
http://WWW8.HP.com/us/en/support-search.HTML?tab=2#/qryterm=OfficeJet%206500%20E709&search_searchtype=s-001HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I uninstalled Photoshop CC and try to reinstall it, but I can't get the option to do so. My CC app Manager think I still have the app.
This happens when Ps app is removed not uninstalled. So when you try to download, it shows you that the CC Ps is already installed.
Run the cleanup tool to remove Ps CC:http://www.adobe.com/support/contact/cscleanertool.html . Restart the computer and then try to reinstall the Ps.
Kind regards
Ashutosh
-
I can't get the sound or video to work on Skype, where he had previously worked.
I can't get the sound or video to work with Skype where, previously, he had worked very well.
Hello
Sign in to Skype and make a Test call.
Who will give you the steps to solve the problems, or contact the Skype Support.
See you soon.
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
How can I get the type of coverage to work
type of coverage
How can I get the type of coverage to work
Hi Ted,
Once you take the type of coverage, it's ready to go!
You are in a place to type in information?
Once it is aligned, it works like a regular keyboard.
B Eddie
-
I can't get the charger 10 elements to work with Windows 8.1. Is there a solution?
Never mind. I thought about it all. Thanks anyway.
-
I can't get the slide show module in LR to load... ' Get a preview of the slide 20 ', he just hangs up. Any ideas?
Thank you... I had the assistance service Adobe restarted my computer... corrupt file!
Sent from my iPad
-
OfficeJet 4630: Can not find the Option of Scan OCR
Installed software for a Windows laptop and if I open the program "HP OfficeJet 4630 Series" / icon on the desktop I can choose the option of OCR of the category of analysis. With the Macbook Pro, I'm on now, I don't see anything like that. There are several programs of HP in a HP folder in the "Applications" folder but none resembles the Windows prorgram and none allow me to scan with OCR option. Where this option on a Mac
Thank you
VFN
I talked to a technician and solve the problem. For some reason any scanning HP app was not showing in the Mac Applications folder, which it is now. What I don't understand is what OCR really means because I just saved a scanned in the rich TEXT format document and it is editable. It wasn't always the case I think that scanning an image required OCR technology so that it can be modified according to me. So what is the point of the OCR now if it appears as saving an image as a RTF (or other format that I suspect) allows for editing?
Thank you.
Sorry for the double post and I check this thread as resolved, although I'd love to hear my understanding of confusion OCR addressed.
-
How can I get the option of working on my creative Cloud files?
I'm trying to enable collaboration on my Adobe site Muse and am following the instructions on the Adobe help chart. However, when I click that I do not have the option to right click collaborate. Do I need a certain subscription for this or what I am doing wrong?
Please explain in more detail: "I went back to them together again and now the options are not able to be selected." Please use screenshots if possible. Here's what I see.
On my desk in the creative Cloud Files folder, I see:
In the web app, I see:
-
can not get the new hard drive to work in the Pavilion ze4805us laptop
have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6
At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports. For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety. Western Digital only provides downloads of software and support going back to Windows XP. Windows Millennium Edition is not able to recognize the full capacity of the drive. Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.
It seems that this laptop is the same time that the books mentioned in this thread. Response from JackShack gives the best explanation as to why he shows quite different in the BIOS. It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS. This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.
I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed. Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003. The 2004 related BIOS earlier than probably took supported LBA. What is the current version of BIOS?
What is the exact message that you get when you try to install Windows Millennium Edition?
-
as the title above says...
Can you use the SHIFT key with other keys and get the alternative symbol? What about the #2, it work keys (just testing to see if it is the keyboard itself)?
-
How can I get the Outlook Express t o work to send e-mails?
When I went to send a link to a video Today Show, I could not send it via Outlook Express. How to make a server to help me send videos from Web sites?
When I went to send a link to a video Today Show, I could not send it via Outlook Express. How to make a server to help me send videos from Web sites?
To use Outlook Express, you must set up your account with it. You must know the names of the servers POP3 and SMTP from your ISP uses and perhaps a few other things. The best way to get the information you need is normally to look at on the web site of the ISP, but you can usually also call them and ask them.
-
Can not get the States of relaxation for work in the widget of blank publication of Muse
Hello
I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:
I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.
Any help with this will be greatly appreciated!
Tania
Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.
-
How can I get the addon "Colorful tabs" to work with the addon "classic restaurateur theme?
I have the colourful tabs addon. But after the addition of the addon Classic theme restaurateur (to retrieve my tabs on the bottom), the color tabs addon does not work. My tabs are now all the same color work addon of the tabs colorful so that all tabs are different colors, so to say to which tab is the one that you use the right then the active tab puts a thin line on the tab bar of the same color as the active tab. So if you have 5 tabs open and they are all the diffierent colors, whether the tab your page in the Green, then you will see a thin green line on the screen (sort of like a horizontal border line). I can see a colored line (different from the color of all the tabs are now) under the tab bar. If I click on a different tab, change the color of the line. I can't tell what color my tab SHOULD be if it was just work, so I know that this addon is installed and working, but not to the poster for a reason any. Is it possible to fix this?
I'm under Win 8.1 (64) and 30,0 FF. Thank you
If you only use the extension of the CTR for the tabs at the bottom, then there are other ways like code in userChrome.css or an extension like tabs on background that might work better.
You can move the tabs on the lower position, just above the navigation area without the use of an extension cord with code to userChrome.css that basically, you just give the tab bar a higher value of - moz-box-ordinal-group (most toolbars have a default value for - moz-box-ordinal-group: 1 to show them in the order of DOM).
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */ #TabsToolbar{-moz-box-ordinal-group:10000!important}
See:
- [997353/questions/997353] How can I put the back below the navigation tabs?
Maybe you are looking for
-
My brother macbook crashes on since yesterday.
As in hours even on the other, my laptop keeps restarting. I don't know what is the cause. After the restart, he asks if I want to report an error - what I do - and it shows me this: Anonymous UUID: F8F47CC0-440E-CB1B-A512-625609BBEBD4 Mon Mar 21 1
-
Lenovo X 201 laptop computer black screen and LCD does not detect after windows startup
Suddenly, my Lenovo Thinkpad x 201 shows only a black screen. I checked the LCD screen with a light and I could see a dark image of the Thinkpad logo and then it go completely black. But when he is on safe mode, I saw my desk in black screen (when I
-
Mobile now installed XP SP3 stops randomly
I installed XP SP3 now my computer hp laptop with processor intel centrino duo stops randomly - is there a solution for this?
-
Can I add 'Run' in my context menu?
Hey everybody, I was only to learn how to add items to my context menu (the right-click menu) and I was wondering how to add the 'Run' application to this menu, because I'm lazy and I don't like having to go to the start menu whenever I need to use i
-
Hi, I need help following conversion excel formula a formula of java for the script of calculations custom in the form of adobe designer:= IF (D7 = 0", A7 * D7)D7 on my form's field unit Price1A7 in my form's field Qty1Thank you