I can't publish my site with an existing domain.

Similar Questions

• Reactive layouts: publish multiple Sites with conditional Builds and which connect

  I hope that someone can provide a simple solution to publish problems I've had with adapted presentations when you try to publish several sites with conditional builds. Essentially, I want to be able to have an index page that links to one of the two variants of the published sites that I called 'General' and 'specific '. When I click on the 'general' link I want to not open the site which was published with a conditional for all these subjects compilation labeled as 'general' and when I click on the 'link' want it to open the site which was published using a conditional version for 'specific '.

  Here are the steps I took to create sites and can't seem to get to bind correctly:

  Table of contents, topic Creation and tagging content

  1. Creates a Table of contents.
  2. Added 2 topics in the Table of contents. The first topic, I called "general" and the second issue I called, 'specific '.
  3. I then click with the right button on the "general" and selected subject Tag to build conditional apply. From there, I've created a new tag called "General".
  4. I repeated this process to create the specific tag, but do a right-click on the 'specific' theme and the creation of a new tag called "specific".

  Layouts reactive and edited the sites based on the conditional tags

  1. Created sensitive presentation using the standard layout and content generated without any conditional builds.
  2. Duplicated sensitive put in page and gave him the content of 'general' then it is generated using the conditional, "General" version If the finished publication published content has shown that the 'general' subject, as expected.
  3. I then repeated the same process for the specific content and content using the version parole, generated 'specific '. When over content published showed that the subject marked as 'specific' as expected.

  Added an Index page to the table of contents

  1. Created a new topic to serve as the launch page.
  2. Added a 'general' hyperlink called for the launch of the general "theme found in the general publishes from the resource manager.
  3. Added a hyperlink called 'specific' to the launch of the general "theme found in the specific issues from the resource manager.
  4. I then republish the sensitive standard layout site.

  From this point, it gets stuck and won't open properly published Web sites. I don't know why it won't launch hyperlinks correctly. Is there something I'm missing? Let me know if you do not want to see my files. I will be gladly their.

  OK, thanks a lot for the capture screen. They help more than you realize.

  So here's one of the biggest mistakes I think that you have done so far. You use the resource manager to link to published results. If it is technically possible to do, I'm pretty sure Adobe never planned for it to be used this way.

  It may help to think in terms of creation of food products. I have long considered as RoboHelp to be very much like working in my kitchen. All consumables (heading text in the headings, images, HTML pages, etc.) are just as raw ingredients. (Eggs, milk, flour, etc.). The places of storage (hard drive) it's like the pantry and the fridge. And RoboHelp provides facilities to easily combine ingredients to create the different recipes.

  This next bit will be somewhat exaggerated, but bear with me. Maybe you have one or more neighbors and all you want to share some common "ingredients". If you set the things where each of you have access to a wine cellar and a shared refrigerator. Maybe you do a Dutch sauce killer. You create it and place in the refrigerator, then your other participants have access through the common "fridge". This is exactly what the resource manager is intended to help.

  Now assume that you create something like cookies chocolate chip and you keep in the refrigerator. Well, that's fine, but you don't want to use cookies to chocolate chip already baked in a recipe that might call for cookie dough. But that's what happens when you take an exit and place in a place intended for raw ingredients. And you will see the strange behavior. Prepare for these cookies chemically changes them so that cookies already are significantly different from the dough used to create them. Similarly, you don't want to take one or more output files and reuse in a project source.

  So in your case, you run an index file and that fires events to produce the output. All should be well. But when you click on the links to open topics, topics are intended to show up more in the right panel. Think of the picture of how works of image on a TV. The moment that link you to something intended to fill the screen, he is forced into this smaller area on the right. If you end up with what you see in the last picture.

  I suggest the following steps.

  First, REMOVE your resource manager exits.

  REMOVE all links that can point here.

  Output records where people will consume copy your projects. (The web server)

  Then figure either the parent (.. /.. / somefolder/somefile.htm) path to other systems or the absolute path (http://www.whatever.com) and to link the projects in this way.

  Sorry, but without seeing the installation of first hand, it is difficult to say what should be these paths.

  I hope this was helpful... Rick

• I created a site of Muse for a customer who wishes to host with Business Catalyst. How to publish the site with their account instead of using one of my free sites?

  I created a site of Muse for a customer who wishes to host with Business Catalyst. How to publish the site with their account instead of using one of my free sites? This is so I can keep my ones that are free for personal projects but also so they can pay for their own accommodation. I'm happy to put everything to them but don't know what to do.

  Hello

  You can use their IDs of BC and use them, which to publish the site will be under their account.

  Please change the login of BC's Edit > preferences > Publish > switch accounts, for Mac, there Adobe Muse > preferences

  Thank you

  Sanjit

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• I can't publish my site? Help, please!

  Hello!

  I can't publish my site? I got this error: shared_unknown_error:22

  Help, please!

  Hello

  Could you please try the steps mentioned in this thread

  Shared-Unknown-error 22

• Can I import a site with DW CC BC

  Hello

  Can I import a site with DW CC BC

  Carla

  Hi Carla,.

  You can use the extension already found in DW CC to connect to your site of BC.

  Within DW go to... Site-> new business catalyst site

  - http://www.youtube.com/watch?v=gSqjdhTpmgc (video tutorial)

  This then allows you to edit and apply changes to DW with the same power as you would normal in British Colombia admin panel.

  I hope this helps!

  -Sidney

• How can I publish my site?  other than the catalyst

  Ok..

  I have published 3 sites successfully already...

  I released my 4th site on catalyst until I take it direct to the internet on its stand alone... How can I do?

  How can I do to publish a site on its stand of field?

  The domain is hosted at Godaddy... What are the IP address, I need to redirect to?  And how to make the selection on the publication of Muse?

  You must select "Business Catalyst" to publish the drop-down list option and then publish the site, after the publication of the site, you can connect to the admin section and add your domain.

  http://helpx.Adobe.com/Muse/using/publishing-websites.html

  https://helpx.Adobe.com/Muse/how-to/publish-your-site.html

  http://helpx.Adobe.com/business-catalyst/using/change-site-domain.html

  Thank you

  Sanjit

• I still can't publish my site

  Hello

  I'm sorry, but it would be nice if I can publish my site...

  Why is it not possible to download the files on the FTP

  Tone

  

  Responded to your original thread - http://forums.adobe.com/message/6237614#6237614.

  Thank you

  Vinayak

• I can't publish my site British Colombia (already check with BC, they believe to be a problem with Muse).

  I get this message: an unexpected error of Adobe Business Catalyst (400, 101004) took place. This can be caused by a temporary outage for maintenance.

  BC support suggested disconnection of the muse, creative cloud, etc... I makes no difference

  Hi dawn,

  Can you please try to reset the preferences of the Muse and then check.

  And try to connect to BusinessCatalyst to check if you are able to connect because this error seems to be a problem with the credentials.

  Kind regards

  Akshay

• I can't publish my site for a customer view

  For the last week I sent treated by BC with no problems. But now when I try to publish again a new customer I get this

  No matter what I put as the site name.

  I also tried to export as HTML, but I get a message saying its "invalid domain name.
  Can someone please!

  Thank you

  That usually means a few things:

  -Poor Internet connection

  -Business Catalyst is made some maintenace or down.

  When you think it might be on the end of the Business Catalyst try to go to this page to see if the servers have a problem.

  http://status.BusinessCatalyst.com

• publish the site with muse to the temp site but then Business Catalyst replaces with Coming Soon site. How d

  Hello. I'll try to repeat my steps to find the problem:

  I create a new site from scratch on BusinessCatalyst so I can choose the package with the blog and e-commerce.

  I then create the Muse website and publish it on the field that I created when I created the new site in Business Catalyst.

  I add a few modules to my concept of the Muse and publish.

  Everything works for a while, but then the Muse published site is replaced with chart of Business Catalyst-default 'Coming Soon'.

  How can I stop this from happening?

  Thank you!

  In this case, you need to assign the page as 'start page' in the admin. of your site

  http://bloomingarden.BusinessCatalyst.com/

  Manager of-> pages web site

  I did it for you.

  

• Can I change a site with Dreamweaver Weebly?

  I occupy a site that sells clothing for dogs and accessories for my wife (www.pawpoint.co.uk) who told me has about 200 errors html in there. This must have been caused by the Weebly drag and drop Editor. Can I change the html on the site errors to improve performance or will Weebly just re - insert errors when I then download my Web site? Can anyone help on this please?

  Don't waste time trying to solve this site.  It is what it is.

  Put your efforts in the construction of a new Web site that you can maintain in DW.

  With regard to performance. Find the best accommodation.

  Currently, the IP address of your pawpoint is shared with 1 496 other sites.  It is appalling.

  http://www.my-IP-neighbors.com/?domain=www.pawpoint.co.UK

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Can I build my site with the replacement Muse provisions and then proceed to a coder to make fluid

  If I designed a site in Muse, with presentations of spare desktop, Tablet and phone, and passed to a developer/coder - it would be useful for developers starting point create a provision of reagent and fluid. That is to say that I would be their passage a HTML site that contains how I want it to look, "breakpoints" desired. Already with some fonts CSS and images.

  If this is the case, it may be a great workflow for the passage of the sites to developer/coder for other improvements.

  You say why not just static content to a coder from scratch. But from a workflow perspective I can plan / Design / Preview and to control the appearance of a site and pass this info in the form of a work already site of a developer. Not something already available to an encoder not up to muse. I can use the Muse in the same if not less time, as do in Indesign and certainly faster than photoshop, and I give the developer is a site HTML already built with CSS styles - and therefore with less to build from scratch by eliminating some of the early stages of construction.

  If it works, it would mean: no more time, or less time on my part + controll more + less time for the developer!
  

  Portia says:

  Thanks for that, but how do I do alternative to the old pages if these Office Tablet and phone buttons do not display on my upper toolbar Muse?

  Open any page of your site and add the additional provisions of the toolbar

  

• How can I publish a module with random questions (and question pool) in a single swf file?

  Hiya,

  What I need is questions randomly in a learning module all exported from captivate 4 in a single swf file, what I get is the swf file and a SWF of pool, is it possible to integrate the pool in the same module/file?

  There will be a place somewhere on the LMS where the SWF file is stored.  But the question pool to get SWFs in the same location would be more trouble that it's worth.

  Some providers of LMS simply not allowing for the fact that training may require more than one file to run it.  They have designed their systems with PowerPoint and PDF or MS Word in mind, all cases where one file is all you need.  These MOVIES are more like content management systems than modern learning management systems.

  If your LMS insists that it cannot operate in this way, then you may need to forget the question pools.

  But I think that you will have even greater problems.  You will wait get marking and follow-up of the results of this LMS for this internship?

  You be obviously NOT use SCORM as publishing option because SCORM still requires JavaScript code to implement the API that allows communication between the LMS and the module course.  Using rather AICC?  Output of Captivate, same AICC requires Javascript, so you need more than the SWF file.

• How can I publish this site correctly?

  Why is it show it this way...

  www. tu.biz/Tubiz/pumps.html (make sure to assemble all the text if you want to view the site)

  Rather than show it this way?

  www. TU.biz

  Hello

  The start page for your domain name exist in a folder called Tubiz, when you load the site, it shows the full url.

  Login to the Admin Panel - > Site settings-> site domain-> you should see start page next to your domain name.

  

  Click on edit-> start page for change at home

  Click Save.

  Check the site again.

  Let me know if you have any question.