I can't reinstall my acer built in webcam on my computer acer laptop. can't find it! How can I reinstall?

Similar Questions

• I can't access or use my built in webcam.im not computer savy

  I have a hp dv9000 pavilian

  Contact HP for documentation on how to use it.

• Computer Toshiba laptop XP runs very slow, how can I speed up?

  I have an old Toshiba laptop with Windows XP, Version 2002, Service Pack 3. There R Pentium 4CPU, 2.40 ghz with 256 MB of Ram.

  It is so slow that it's like watching paint dry. I deleted all the programs that I dared (those I asked about) and I defrag regularly. There seems to be a lot of many programs (including Toshiba ones) are not in use, but being a non-techie I daren't delete them.

  I need help to allow him to work faster - if it is possible.

  Any help would be wonderful.

  Thanks - Chris

  * original title - old and slow *.

  Adding more ram is not a task difficult because memory ram chips simply plug in a socket on the motherboard.

  However, it can be difficult, because it requires opening the computer.   Then there that understand particular motherboard configuratoin needs when it comes to memory.

  Some motherboards have specific requirements for memory.

  so the first step is to look at the manual of the computer on the configuration of the memory section and see if you can add more ram, or if you need to get out of this little chip of 256 out and just use a larger chip, such as 1 gig of ram.   (for ordinary computer users and xp, it is not necessary to have more than 1 GB of ram installed)

  with regard to the safe mode.   you are unable to connect to the internet because it is not allowed.  However, in safe mode with networking you can, since the internet is a global network.

  the reason why security mode perform better than in normal mode, is due to the fact that non-microsoft programs, IE third party programs are prevented from loading into memory and running.

  as a result of not having other programs the windwos (by itself) is able to work ok in / with the chip memory.

  In contrast, mode normal, windows + third-party programs are loaded in your partial memory chip, and it's moving the system.

  If at this point, you could try to eliminate some of the programs that are automatically started and running in memory for windows in normal mode get an improvement in performance.

  the method is called "clean boot" and here are the steps:

  http://pcsmarties.WordPress.com/CleanBoot/

  but the above method plus adding more memory to your computer, is the way to go.

  either said by the way, if you want to perform a clean boot, make sure not to disable the start up programs for what is toshiba, like the mouse or the keyboard.

  on some laptops the mouse drivers are loaded at startup and that you have to plug a regular usb mouse for some functions of the mouse until you can re - initialize the mouse driver.

  In addition, you mentioned that malwarebytes found some infections.   Although this is a good thing, it is hoped that the infection is not one of your folders of window system corrupt.

• How do I use the built in webcam on my computer laptop gateway?

  I have no idea how even turn on the webcam. I don't know even where to find the software for the webcam. I tried to use Skype and that no longer works. Is there anyway that I can fix this?

  On your front door, you have the Camera Assistant Software installed. It is not a start menu entry, but you should find that it listed in programs and features, if it is installed. If it is installed and running, you should find an icon in the notification area and that there should be a hidden toolbar that will show if you move your mouse cursor along the top of your screen. If you do not have the software installed you should be able to download and install it from the gateway support site. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

• I uninstalled my built in webcam, how do I reinstall it?

  I have a Dell Inspiron and the webcam was not working, so I tried to uninstall.

  It's a built-in webcam, I uninstalled by going to devices.

  The problem is that I can not reinstall it! I don't know how to - I have tried everything - reboot, look in my files for this webcam, so I can reinstall.

  How can I reinstall it? It is built, so I can't plug it in outgoing/incoming.

  Any help is appreciated - thanks!

  Hello

  Do a system restore to before the problem happened.

  http://bertk.MVPs.org/html/restoresysv.html

  Or see if you can find the software and re-upload it at this link of Dell:

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  But for the best support for a Dell product, ask in the Forums of Support from Dell.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• get a copy of Vista OEM or reinstall an ACER laptop.

  I have a situation, where I'd like to perform a recovery on an ACER laptop to restore factory settings, however I have no CD to go with it. I have a long history here, perhaps someone more familiar with laptops and Vista installation can suggest where to begin the search, or the place where process? I am VERY familiar with the repair of Windows 95, 98, 2000, and XP is installed on desktop computers, but you don't master with Vista. I also have little experience with laptops and am not sure if the laptop has a recovery partition which can restore the factory settings or if it's just a thing of emergency repair, as my investigation into what was wrong with the laptop was a little weird. I'll do a post that is a bit of a long story, but it should show my process of thought as well as my skill level. I spent

  A knowledge of my friends has recently undergone a crash of hard disk on his laptop computer, although he didn't know exactly what was the problem at the time. Fortunately there is nothing on the drive that does not saved except for the OS.

  At first glance, it appeared that the hard drive was bad, and he went out and bought a new laptop. Outings, I was informed about this and they asked if I wanted this one for parts or to try to fix it if I could.

  After receiving the laptop, I decided to check what was wrong. I tried to turn on immediately, before even to sort out the power cord, but nothing happened. He was dead. The laptop was unused for several days before being delivered to me. Thinking that was the problem, I have dispaired that I never changed a power supply in a laptop. However, for the heck of it, I plugged in the power cord and to my surprise, it started. This dead battery may be important later.

  He has been starting some sort of partition repair which gave me access to repair system I since lost access to. The thing was, when I got to the screen that says "System Recovery Options" with the "motor load' and 'next' boxes at the bottom, no OS installs were neither were all partitions.

  I got to the menu where it gave me options, with "command prompt" downstairs. I just assumed it was like the XP Recovery console and I tried to use it as such.

  They gave me a "X:\windows\system32" prompt, which I thought was weird, because it's the X drive instead of drive C. The people in question can barely use a computer, so they would not have reassigned the drive letter.

  I did dir c: and had an error on drive c. be corrupted. Also, I did a dir d: and get "file not found" that seemed weird. It turns out that the E drive was the dvd - rom, then I discovered. Other letters gave errors and invalid letters.

  I decided to start with the basics, and I used the command chkdsk on drives C and D. To my surprise, that seemed to do the trick, and after restart I was taken in the Welcome screen.

  Restart at first seemed to be a mistake, as I have since not managed to find a way to return to this menu of repair and subsequent attempts through the Vista Start menu (or whatever you call the menu that is displayed when hitting F8 these days.) Its name has changed between Windows 95 and xP) need the administrator password.

  I was to call back them and get the password from them, and I'd have to try to use one of the solutions 'password lost admin, cannot connect', I didn't know if it would be a good idea on a potentially damaged system of mud autour with registry hacks.

  At that time, it was late in the day and I had a few other things to do. I decided to start with Windows Defender antivirus scans and the tread Micro antivirus, that have been installed. He had a subscription to the microphone of the tread, so I connected the laptop to my programmer, updated definitions and performed a full scan.

  The two negative came scans, with the exception of a few tracking cookies. At this point, it was late and I was tiered, so I all stop and went to bed. I had disconnected the laptop to my switch and it sat in my bedroom next to the bed.

  Around 01:00 a.m., I was awakened by a strong and heard the WHIR of the laptop sounds beep. The computer had apparently turned on, but when I opened the file, the screen doesn't have to turn on. Think of some sort of virus or Trojan was at fault, since a disconnected laptop should be on NOT himself in the middle of the night, I hit the power button to turn it off, and he succeeded.

  In the morning, I tried to install malwarebytes and run a scan and it found several things he called Trojan horses, as well as some adware. I removed it.

  I have found it useful to keep on the laptop, and rather than to try to clean it up, I would like to reinstall from scratch.

  I looked on the internet and found that most Acer laptops should have their accessible restore partitions by pressing control-f10 or alt + f10.

  Here's the strange thing. I did, and it started working. However, I had a Windows XP startup screen and it says "Windows XP".

  The laptop is running Vista Home Premium, and there a House premium sticker product key OEM on the bottom. If the recovery partition installed XP and asks me a product key XP, I'm GROUND.

  I have an OEM copy of Vista, but it's for a 4200DX gateway. Somehow I doubt that it will help you for the upgrade of the Vista laptop. Any suggestions?

  Jumped the gun in the abandonment of the XP, need it install Vista?

  The laptop is an Acer Aspire 5570Z according to the engraving on the front.

  On the back it says:

  MFG. Date: 0706 Aspire 5570-2067

  Yes, suggestions? I could try to clean install, but it is probably better to start from scratch. On the other hand, have XP is probably a better choice, because the laptop has only 1 GB of RAM. Possibility to choose, I would choose XP on 7 or Vistafor this computer, but which leaves me with the problem of a product key.

  If the recovery partition is indeed a XP product key, is it possible that Microsoft would leave me to transfer the license from a dead Tower brand OEM copy of XP home to this laptop? I doubt that the key of this death dell sticker product could work on this laptop, but it would be worth it. I need a new key, and they could indicate the old key as invalid with Windows Genuine Advantage and refuse to turn it on.

  Suggest that call you Acer to see if they can make any sense out of it.

  Some restore partitions when launched as the emachines PC (I fixed in the last days) installed XP preactivated and no key was needed.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Reinstall a built in webcam

  How can I reinstall built in webcam that is built into the screen, is not for a laptop. I've heard to download a new version of windows vista, but I'm worried it delete all my files. I don't want my computer all over again. If I download the version would erase my exsisting files?

  Contact the manufacturer of your computer.

  See you soon. Mick Murphy - Microsoft partner

• Windows 8 came pre-installed on a hp tower built, am now upgrading my computer, how can I keep windows?

  Windows 8 came pre-installed on a hp Tower pre-built, am now upgrading my computer (new Mobo, Cpu, Gpu, cases, etc.) and guard my drive hard, how can I keep windows? or I have to buy a new product key?

  Hello

   
  Please contact Microsoft Community.
   
  The problem description, I understand that you want to upgrade the hardware and need to confirm how can you keep your operating system.
   
  In this case, I want to tell you that you want to keep your drive hard if you do not have to reinstall the operating system and that you upgrade the motherboard too and in the OEM version product key is integrated motherboard, so in this case, you may need contact system manufacturing to re activate your product key.
   
  For reference, please see:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacing-motherboard-on-system-running-OEM/9aed1ae6-99f9-477a-940b-d8d9003f9246?auth=1
   
   
  I hope this helps.
   
  Kind regards
  Anusha

• How can I activate my built in webcam on my EliteBook 6930p

  Spoiler (Highlight to read)

  How can I activate my built-in webcam on my EliteBook 6930p using windows 7 ultimate 32-bit Operating system.

  How can I activate my built-in webcam on my EliteBook 6930p using windows 7 ultimate 32-bit Operating system.

  The information contained in the following links may help you to a certain extent:

  HP laptop, Touch and PC AiO - Webcam Troubleshooting (Windows 7)

  Difficult problems of WebCam on your laptop comes with and still running the Windows 7 operating system.

  HP desktop PC - Webcam Troubleshooting (Windows 7)

  Try to use a webcam and receive no sound or video? This article contains useful suggestions that can solve your webcam.

  HP Notebook PC - tests with MediaSmart Webcam on Windows 7

  HP MediaSmart Webcam allows you to test and use the webcams built into Windows 7.

• I can't find an option to use my built in webcam

  Hi I have a toshiba satellite pro laptop with built in webcam but I can't find any options to access Ive looked all over the laptop, but can not find anything to do with him or just not what I'm looking for tbh lol help wud be good! x

  [Moved from comments]

  Hello

  On my Toshiba (different model), the webcam program is to

  Start > all programs > Toshiba > Media and Enterainment.

  Explore start > all programs. You should find it.

  Don

• What is the name of the object that I use to put in properties when setting up my acer built in webcam

  name of the object to set properties for built in webcam

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and support
  http://us.Acer.com/AC/en/us/content/support

  Acer - drivers and downloads
  http://us.Acer.com/AC/en/us/content/drivers

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ============================

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  The methods below are for Windows 7 - Vista and XP are similar.

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Where can I find specifications and manuals for Acer laptops?

  I have tryied to use acer.com website to find information on an Acer laptop. I think that this site is almost useless, because I can't find a product (I click on search, but neither a result or an error is returned). I have tryied with E3-112-C658 and NX. MRLEX.001 also, I tried to search a list produscts. Couldn't find any exact product AND no accurate technical tests are provided for existing product. I downloaded a manual for a similar product and that it contains or sheet or upgrade instruction (HARD drive / RAM replacement)

  I want to know about more top model how much RAM it only supports and is easy to replace RAM/HDD (I don't like to deal with more than 8 screws for this operaon). Can you help me please?

  Another question for Acer users: are you satisfied with your products? I'm disappointed, just after I saw how 'professional' are their products and support pages.

  
  

• My Acer laptop stop by itself due to overheating, where can I get it checked/fixed?

  My Acer laptop stop by itself due to overheating, where can I get it checked/fixed?

  Because my laptop is already more than 3 years old (out of warranty), I opened it up with the repair guide.
  I am amazed at what I found: dust clusters as a foam - like substance that blocked the ventilation. I remove the dust and my laptop works fine now

• How can I transfer my Gallery A-810 to my Acer laptop?

  I need to transfer my Gallery on my laptop.  I also want to use the SD card to store and transfer photos.  Help you enjoy.

  Plug your A-810 on your Acer laptop with the USB cable, then you can browse the internal memory and the SD of your PC with the windows default application, so you can copy and paste images.

  You can move the entire DCIM folder (where your photos are stored) from the internal memory to the card CD.

  to define the SD card as default image save the position, you need to check on the parameters of the camera app (which is normally in storage).

• Where can I find specifications for Acer laptops to upgrade? I have an Acer Aspire one

  Hello

  Where can I find specifications for Acer laptops to upgrade? I have an Acer Aspire One, which is still under Windows XP.

  I looked on the website and check the manual with no techinical inside info.   I'm not find respect for this netbook.

  Can someone identify the info.

  Thank you

  T

  Hello Tom,

  You can watch this video. The AOD250 have the same specifications as (same motherboard with Intel Atom N270 processor).

  I suggest you to upgrade the memory to 2 GB:

  KN.2GB09.003	SODIMM.2GB.DDR2 - 667.LF (ELIPIDA)
  KN.2GB0B.011	SODIMM.2GB.DDR2 - 667.SAM (SAMSUNG)