I can't rename files or folders in my 'downloads '.

Similar Questions

• Can I rename files or folders I downloaded Adobe Creative Cloud?

  I can't understand how to rename my files or folders Adobe Creative Cloud. Is there an easy way to do this?

  It is easy to rename your files and folders on Adobe Creative cloud.

  1. Connect to Adobe Creative Cloud.
  2. Click the file or folder you want to rename.
  3. Click on the name that will appear above the toolbar and enter a new name for the file or folder.

• I can't rename files and folders, or delete files and folders. Please someone has a solution, I run vista 64 k bits.

  The window in which I try to rename a file or folder freezes after I'm done typing the new name as soon as I right click or press enter.

  The same effect occurs whenever I try to delete a file or a folder as well. The window hangs and won't let me use the pc, but for internet browsers only and retarting the pc renaming it scheduled and are deleted. So basically, whenever I have to rename/delete a file or folder of the pc freezes and I have to restart to be able to use the pc for internet access. It's very frustrating and I would appreciate help, please.

  Hello

  1. Since when are you facing this problem?
  2. Have you logged as administrator?
  3. You did any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• How can I move files between folders to cloud storage?

  How can I move files between folders to cloud storage?

  Hello

  1. navigate to the folder that contains the files you want to move.

  2. click on the 'Batch' icon in the upper-left.

  3. Select the file that you want to move.

  4. click on the icon 'Move' at the top.

  5. This should list the files and allow you to move the files.

  I hope this helps.

• Could not delete or rename files or folders with the notches on the icons

  A number of my files and folders have white on the icons check marks when I try to delete or rename it, I get a message that I can not because it is used by another person or program.  However I did open

  You use a backup program online like Mozy, Carbonite, SugarSync, etc.?  It can back up the files. Steve Winograd, most Microsoft Valuable Professional (desktop experience)

• Cannot rename files or folders.

  Compaq Presario SR1303WM, Windows XP service pack 3. A month ago the computer had a lighting strike and I lost everything and had to use the restore function. I created a name slightly different admin and already had a name of admin, so that gave me 2 users with administrator rights. When I log in as an administrator, I can't rename any files or folders. Another name for the administrator to rename.

  Carl, if I were you, I would like to delete the Admin account that does not allow you to change the names and start over again.  A problem occurred when the account was created.

• How can I move files to folders multiable to a folder?

  I need to move all the files of a large number of files in a folder.

  Open a folder. CTRL + A will highlight all files. Drag them into the new folder.

• Can I recover files and folders moved to the Temp profile

  Hello

  A user is logged on with a temporary profile on Vista.  They have seen their name in the start menu and assumed everything was fine.

  After having seen that their office was wrong, they went check 'My Documents', and obviously they weren't there.

  The user then crossed ' computer > C: > users and found their office and documents.

  Then they moved them (not copied) on the desktop and "My Documents" to the active profile.

  Now when they have logged off and back on, their original profile has been restored but their desktop and "My Documents" have been shortened just to the Temp profile.

  Is it possible to recover data from the user? keeping in mind that there is no backup of their data.

  Any help will be appreciated.

  Thank you

  Mark

  Hello

  A user is logged on with a temporary profile on Vista.  They have seen their name in the start menu and assumed everything was fine.

  After having seen that their office was wrong, they went check 'My Documents', and obviously they weren't there.

  The user then crossed ' computer > C: > users and found their office and documents.

  Then they moved them (not copied) on the desktop and "My Documents" to the active profile.

  Now when they have logged off and back on, their original profile has been restored but their desktop and "My Documents" have been shortened just to the Temp profile.

  Is it possible to recover data from the user? keeping in mind that there is no backup of their data.

  Any help will be appreciated.

  Thank you

  Mark

  Hey DRIVE brand

  It's not my computer or my documents as such in vista

  It is a term of xp

  they are the points of junction in vista read below

  http://www.Svrops.com/Svrops/articles/jpoints.htm

  These are vista forums where vista tips are given

  Here are the tips from microsoft on a temporary profile loading in vista

  "Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administrator. »

  http://support.Microsoft.com/kb/947242

  Walter, the time zone traveller

• I can't rename the files or icons on my desktop

  All of a sudden, I find that I can not rename files or icons on my desktop.  I clic click right on the folder icon, select Rename, type over the existing name which is now in blue, press ENTER, and the original name is still there.  I was able to rename without problem before a few days ago.  I have not updated anything during this period.  I am running Vista Home Premium 64-bit.

  Hello

   

  Method 1:
  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  See the link for further directions on scan SFC - below
  http://support.Microsoft.com/kb/929833

  
  Method 2:

  You can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  Method 3:
  You try to perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.

• Satellite L630 - how to rename files or folder in the Start Menu

  I used to rename files and folders by clicking the right button of the mouse or touchpad set and choose Rename.
  With my new Satellite L630, if I click on the right button, the menu with the options does not appear.

  It does not appear when I right-click on ay other file or folder, but not in the start menu. I can also drag an item any within the start menu.
  So I can not at all to customize (already tried with F2, does not or)

  What should I do to rename, drag the items from the start menu?

  Thank you for your kind contributions,
  Walter

  Hi mate

  I assume you are using Win7. Right?

  Cannot rename files (programs) that appear in the Start Menu.

  You can ONLY rename folders.
  If you click on all programs, then you should also see some folders there.
  Right click on the folder and you should see the option rename.
  Choose this option and then you should be able to rename the folder

• Rename files in Lightroom 3 when importing (problems)

  I can trouble importing files into Lightroom name where I want to custom their name - sequentially. I import the data to a folder on my hard drive in the folder that contains all of my files in lightroom. I am able to import and rename files in folders with ease. Others said Lightroom 3 couldn't have their name. Why? If I try to import and rename in LR2 I have no problem. I'm basically a Nikon generated file, say DSC0001. NAVE and rename in Ireland 07-30 - 08.NEF. Lightroom 3 cannot do. Anyone know why? Thank you.

  I'm renaming all my during the import of the NAVE.

  Here's how:

  

  and it works very well.

  There is another problem with the import you might encounter. The actual files on the file system and records, he presents in the library do not correspond regarding the rental structure. Try to pass will result in an error message that the file cannot be moved because it is already there. If you run this as well, just let me know for a solution. Hope that Adobe fixes this annoying very quickly.

  Franz

• Windows media player is anyway to get media player to recognize a zip file? I get the error message the media player can't read file - unrecognized codec?

  I'm on windows 7 latest model home of wmp - i have checked no update is available at this time

  Zip is a file format compressed - it can contain several files and folders inside. Windows Media Player will be able to play a Zip file. However, you can unzip the file (unzip) so that you can see its contents. If there is any right one media file, you will be able to read them.

  To unzip, right-click on the file and select extract all.

• Rename files in sequential order

  original title: numbering of sequential files

  After spending many hours of editing and sorting photos from a recent trip I want to bring to a treatment for printing shop in a local photo book. Unfortunately their software performs a sort on the date modified date taken so they are out of use. I well I could work around this by renaming the files with sequential numbers, so every selected and renamed and it have been renamed as follows
  Europe (1)
  Europe (2)...
  ... europe (10)...
  .. .eourope (100)...

  Unfortunately the software in machine shops treats these numbers as text rearranges so files (when they are sorted by name) as follows
  Europe (1)
  Europe (10)
  Europe (100)
  Europe (2)
  Europe (20)
  Europe (200), etc., in other words, they are still didn't stop.

  Question: How can I rename files window "europe (001), europe (002)... europe (010)... etc (100) in europe?

  Hello

  I would suggest trying the following steps and check.

  Select all photos by pressing keys CTRL + A , right click on the first picture and then select Rename

  Type a name for the Group - space - .jpg (10001)

  for example: group name (10001) .jpg

  Press ENTER.

  Windows should rename the remaining files as follows:

  Group name (10001) .jpg
  Group name (10002) .jpg
  Group name (10003) .jpg

  For reference:

  Organize, sort, or group your files

   http://Windows.Microsoft.com/is-is/Windows7/arrange-sort-or-group-your-files

  Rename a file

  http://Windows.Microsoft.com/en-us/Windows7/rename-a-file

  Hope this information is useful.

• 'Read only' look for files and folders

  I think a virus entered in my computer and changed 80% of my documents and files in a 'read only' appearance, even if they are still available to make changes and can be saved with the changes. This has happened after the repair of the system by restoring to an earlier date.

  1. Why do you have this happen: was it really a virus?

  2. How can I go back to the previous 'typical' aspect of the documents and records?

  Hello

  What security program is installed on the computer?

   

  Method 1: Strange behavior could be due to the virus.

  Since you can now access files and folders, you can run the virus scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: You can also check:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

• move files to folders

  How can I move files into folders?

  I'm new to photoshop touch, so I expected, I can move a file by 'tab and hold' to get into an editing mode, even I can't find a btn edit to edit the files and folders?

  Help, please.

  :)) Thanks!

  Within the Gallery, please choose "Move project" from the top menu bar.

  Select a project that you want to move and press OK.

  Select a folder, and then tap OK.

  That's all

  Thank you!