I can't save. Advance registration line but shows only a few peaks.
I can't save. Advance registration line but shows only a few peaks.
Hello
1 did you do any change on the computer before this problem?
2. which version of the Windows operating system is installed on your computer?
If you are using Windows Vista I suggest you to consult the following Microsoft article.
Troubleshoot audio recording : http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-audio-recording-problems
If you are using Windows 7 I suggest you to consult the following Microsoft article
Open the troubleshooting of Audio recording open the troubleshooting of audio :http://windows.microsoft.com/en-US/windows7/Open-the-Recording-Audio-troubleshooter
Also see the following Microsoft article:
Record audio with Sound Recorder: http://windows.microsoft.com/en-US/windows7/Record-audio-with-Sound-Recorder
Audio recording in sound recorder: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Recording-audio-in-Sound-Recorder-frequently-asked-questions
Record sound: http://windows.microsoft.com/en-US/windows-vista/Record-sound
Tags: Windows
Similar Questions
-
I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.
How do I recover from this?
Is it possible to revert to a previous version?
You can download the previous version of . mozilla.org and install it. After that revert to your previous version, you can check your incident reports to see what was causing the problem via help-> troubleshooting information...
-
My Mac Mini with 500 GB disk hard but shows only 276 available.
I think that is is split using Bootcamp when I bought to load programs such as Word and Excel PC... I think there may be half the player I do not use. But it only shows the "Windows partition where you are supposed to choose the section you want. Where is the rest of the disc? Thank you
You're not being very clear, but...
Launch utility disk from the Applications > Utilities folder. It will show you how your disk is partitioned.
If you want to see how your disk space is being used, select about this Mac from the Apple menu, then click the storage tab.
-
"Unidentified network".
Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanksGo to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.
Do not put a check in the box: remove the software driver for this device.
Restart your computer and Windows will install your wireless network.
If the problem persists, see if your computer manufacturer has an updated driver.
These articles may help:
-
You want to remove a registration line. but he can't?
Excuse me, I m just a beginner. I do not know how to ask T_T
-fragment of different
-Different view object
I have a ViewObject A and B ViewObject to show all attributes,
How to remove for as ViewObject. on the side? I remove in different fragments, when I clicked on it.
He has deleted 1 fragment, but in another fragment it didn t. When I update it, the record is not deleted.
Sorry for the confusion of all the gurus. ~_~Different view T_T - different fragment object.
I can't understud correctly this sentence.
Please formulate your sentences correctly
I have a ViewObject A and B ViewObject to show all attributes,
Ok
How to remove for as ViewObject
what you want.
This sentence, what I wanted to say
Be, that you want to delete the viewobject? It is not possible to remove the vo by using any code.
or else are you want to delete the records of the vo?
the following willthe record is not deleted.
ATLAST I guess, too little of this post you box.
you want to delete the records, but it is not delete,
If am understud correctly means,
public String cil10_action() { BindingContainer bindings = getBindings(); OperationBinding operationBinding = bindings.getOperationBinding("Delete"); Object result = operationBinding.execute(); OperationBinding coperationBinding = bindings.getOperationBinding("Commit"); Object cresult = coperationBinding.execute(); if (!operationBinding.getErrors().isEmpty()) { return null; } return null; }and atalst that I can't found your post jdev version and some resources to help you.
Please go here before you post anything.
https://forums.Oracle.com/forums/Ann.jspa?annID=56 -
Can not save anything - access denied-, but using account Admin
I have Windows 7 and whenever I try and save something in my user folder, it says access denied because I'm not an Admin - but I am - and it then asks me to save it in the folder of the previous user that has some sort of lock on him, so I can't delete it. There is only 1 account (mine), but it still won't let me save files anywhere, but the locked admin folder. How to remove or unlock it? I'm minutes to throw my screen by the window. I tried prntscrn'ing the problem, but it wouldn't let me save the MS paint doc!
Your very first step with a used computer is to do a clean install of Windows. Not sure what problems you inherited from the original owner. If you don't want to not do it (not recommended), and then as new accounts work very well do yourself a new Standard for the daily user and keep one new account administrator for your account 'CompAdmin' as described in the above recommended. Copy the data from your old account to your new account Standard user and then delete the old user account. MS - MVP - Elephant Boy computers - don't panic!
-
Hi, I need to make the pdf which was recorded as spreads (from Indesign) so that when you navigate to a page in Acrobat, you go to the page number not the number of propagation for example if you search for page 5 do not you on page 8-9, which is the 5th spread , y at - it a setting or even a script that I can add to my pdf?
I'm sorry, but it is not possible with a script, either. A possible solution would be to divide the "spreads" of two physical pages and set the option to display the file view two pages at a time. This way, if the user has entered a number of page they will see any spread.
-
View object has more than 2000 lines but with only 500
Hi all
I have a view object that has more than 2000 lines. But when I try to see the front end of data, it does is display only 500 records.
Then when I did some research I discovered that there is a profile option where I need to increase the size.
before the value in the profile Option (FND: display object Max size Fetch) amounted to 500
Thus valued at 3000.
But I wanted to know what will be the impact of the evolution of this profile option on Database/Application.
Please advice which would be the best way to manage several size maximum extraction on the objects in view.
Thank you.
Not really sure what you mean by 'calculations are performed properly"If you are not able to see in the front.
If you don't even have an option "next/previous" on the table to go to the next round?
You can paste a screenshot?
You can try to increase the property records of the region of the table and see what happens?
Where did you add vo.setMaxFetchSize(-1)?
Can you try replacing exwcuteQuery() and add the following inside that?
See you soon
AJ
-
Advanced actions - create field shows only as white
I am trying to create a new tip action. I have several shares that have one or two slight differences. It seems that I have to create each action from scratch every time. I think that the field "create from" would allow me to create a new action based on an existing (I have a number of them already), but this field contains only "white"... Any ideas of a workaround to get there (create action based on an existing one)?
Create a will be open only actions shared models that allows you to create a new tip action. Check my blog for articles on joint actions.
However for the advanced actions, you can duplicate an action, changing its name and change it. Remember to update the action.
-
Save for web doesn't show only not in install it later?
My save for Web option is passed in this last update. I uninstalled and reinstalled. This feature is gone? That's happened?
They have moved. >.
He is now under file > export > save for Web (Legacy)
It was fine, where it was, but whatever! Just glad that it's still there.
-
Menu Spry missing first submenus, but showing only the last.
Hello, I'm doing a site for a school project and I have a spry menu code that looks good, but when it is turned on, when you move the menu, submenus are empty except for the last.
Here's what it looks like on a mode live view:
Above war-torn project are three submenus. They have the text, but will not appear. My other menus do the same thing. For personal reasons, I will not not to publish the entire site because of his real name, address, contact, etc.
I'll post the menu spry and css menu spry.
Spry menu:
< div class = "container" >
< div class = "NavigationBar" >
< ul id = "MenuBar1" class = "MenuBarHorizontal" >
< li > < a href = "#" > about me < /a > < /li >
< li > < a href = "#" > Contact < /a > < /li >
< li > < a class = "MenuBarItemSubmenu" href = "#" > < /a > ongoing projects
< ul >
< li > < a class = "MenuBarItemSubmenu" href = "Film.html" > < /a > Film
< ul >
< li > < a href = "#" > fictions < /a > < /li >
< li > < a href = "#" > Japan 2016 < /a > < /li >
< /ul >
< /li >
< li > < a href = "Photography.html" > photography < /a > < /li > ""
< li > < a href = "Story.html" > stories < /a > < /li > ""
< li > < a href = "Project_Wartorn.html" > project: torn apart by the war < /a > < /li > ""
< /ul >
< /li >
< li > < a href = "#" > equipment < /a > < /li >
< /ul > < hr / >
<! - end .header - > < / div >
< div class = "content" >
Spry CSS menu:
@charset "UTF-8";
/ * Sections - version 0.6 - Pre - Release Spry 1.6.1 * /.
/ * Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
/*******************************************************************************
The AVAILABLE INFORMATION: Describes the box model, positioning, the order
*******************************************************************************/
/ * The outermost container for the menu bar, an area of width auto without margin or padding * /.
UL. MenuBarHorizontal
{
padding: 0;
list-style-type: none;
font size: 20px;
cursor: default;
Width: 921px;
height: 30px;
background-color: #333;
do-family: "Arial Black", Gadget, without serif.
text-align: center;
margin-top: 0;
right margin: 15px;
margin-bottom: 0;
margin left: 19px;
}
/ * Value of the menu bar active with this class, currently the definition of z-index to accommodate IE rendering bugs: http://therealcrisp.xs4all.nl/Meuk/IE-zindexbug.html */
UL. MenuBarActive
{
z-index: 1000;
}
/ * Menu item containers, position of children relative to this container and are a fixed width * /.
UL. MenuBarHorizontal li
{
padding: 0;
list-style-type: none;
do-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
Width: 230px;
float: left;
height: 15px;
margin: 0;
}
/ * Submenus should appear under their parent (top: 0) with a higher z-index, but they are first the left side of the screen (-1000em) * /.
UL. MenuBarHorizontal ul
{
margin: 0;
padding: 0;
list-style-type: none;
do-size: 100%;
z index: 1020;
cursor: default;
Width: 8.2em;
position: absolute;
left:-1000em;
}
/ * Submenu that shows with the designation of the class MenuBarSubmenuVisible, we put the car left so it happens on the screen below its parent menu item * /.
UL. MenuBarHorizontal ul. MenuBarSubmenuVisible
{
left: auto;
}
/ * Container of menu items are same fixed width parent * /.
UL. MenuBarHorizontal ul li
{
Width: 8.2em;
}
/ * Submenus should appear slightly overlapping to the right (95%) and upward (-5%) * /.
UL. MenuBarHorizontal ul ul
{
position: absolute;
margin:-5% 0 0 95%;
}
/ * Submenu that shows with the designation of the class MenuBarSubmenuVisible, we have left to 0, it is on the screen * /.
UL. MenuBarHorizontal ul. MenuBarSubmenuVisible ul. MenuBarSubmenuVisible
{
left: auto;
top: 0;
}
/*******************************************************************************
INFORMATION DESIGN: Describes the set of colors, borders, fonts
*******************************************************************************/
/ * Submenu containers have borders on all sides * /.
UL. MenuBarHorizontal ul
{
border: 1px solid #CCC;
}
/ * Menu items are a light grey block with padding and no text decoration * /.
UL. MenuBarHorizontal a
{
display: block;
cursor: pointer;
background-color: #333;
color: #393;
text-decoration: none;
Width: auto;
padding-top: 0.5em;
padding-right: 0.75em;
padding-bottom: 0.5em;
padding-left: 0.75em;
}
/ Components menu that have mouse over or focus have a blue background and white text * /.
UL. MenuBarHorizontal a: hover, ul. MenuBarHorizontal a: focus
{
background-color: # 33;
Color: #333;
}
/ * Menu items that are opened with the submenus are on MenuBarItemHover with a blue background and white text * /.
UL. MenuBarHorizontal a.MenuBarItemHover, ul. MenuBarHorizontal a.MenuBarItemSubmenuHover, ul. MenuBarHorizontal a.MenuBarSubmenuVisible
{
background-color: #F0F0F0;
Color: #333;
Width: auto;
}
/*******************************************************************************
Submenu INDICATION: styles if there is a submenu in a given category
*******************************************************************************/
/ * Menu items that have a submenu have the MenuBarItemSubmenu class designation and are set to use a positioned background the far left (95%) and vertically centered image (50%) * /.
UL. MenuBarHorizontal a.MenuBarItemSubmenu
{
background-image: url (SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 50 95%;
}
/ * Menu items that have a submenu have the MenuBarItemSubmenu class designation and are set to use a positioned background the far left (95%) and vertically centered image (50%) * /.
UL. MenuBarHorizontal ul a.MenuBarItemSubmenu
{
background-image: url (SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 50 95%;
}
/ * Menu items that are opened with the submenus have the designation of the MenuBarItemSubmenuHover class and are set to use a background image "hover" positioned on the far left (95%) and centered vertically (50%) * /.
UL. MenuBarHorizontal a.MenuBarItemSubmenuHover
{
background-image: url (SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 50 95%;
}
/ * Menu items that are opened with the submenus have the designation of the MenuBarItemSubmenuHover class and are set to use a background image "hover" positioned on the far left (95%) and centered vertically (50%) * /.
UL. MenuBarHorizontal ul a.MenuBarItemSubmenuHover
{
background-image: url (SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 50 95%;
}
/*******************************************************************************
BROWSER HACKS: hacks below should not be changed, unless you are an expert
*******************************************************************************/
/ * HACK FOR IE: to ensure that sub menus show above form controls, underpin us each submenu with an iframe * /.
UL. MenuBarHorizontal iframe
{
position: absolute;
z index: 1010;
Filter:alpha(opacity:0.1);
}
/ * HACK FOR IE: to stabilize the appearance of the menu items. the slash in the float is to keep IE 5.0 analysis * /.
@media screen, projection
{
UL. MenuBarHorizontal li. MenuBarItemIE
{
display: inline;
f\loat: left;
background-color: #333;
}
}
I guess you have your SpryAssets responsible, including the javascript file concerning it. Also, check the bottom of your swap file for the javascript code specific to this menu bar. Spry menus come with three components, the call to the head of the document for the javascript files and css, the structure itself in the body of the document and javascript code at the bottom of the body (before the tag).
Javascript is not published (and not for the faint of heart); the css controls the menu bar similar to and can be edited with care, and this at the bottom of the page (for example), defining the new variable in the menu bar:
-
I can't see my pictures, is to show only an icon
I can't see my camera raw photos in Adobe bridge for CS6. It's only showing me an icon where pictures should be.
Thanks for posting on the Adobe Forums.
Please see generic icons | Files camera raw | Adobe Bridge
Concerning
Assani
-
Two tables have been targeted in sql but show only a single table top running pln
Dear all,
I captured in statspack following sql. There are two tables mentioned in the sql code. However, in the execution plan, it is alone. Grateful if you can help us with that. TQ.
Here's the updated sql shaped for ease of readingCPU Elapsd Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value --------------- ------------ -------------- ------ -------- --------- ---------- 448,047,663 3,738 119,862.9 95.5 1208.81 1387.07 998768410 Module: java@myfabbus (TNS V1-V3) SELECT QID, MID, MSG_STATE, MSG_STATE_WHEN FROM mybus.MYIQ_myb us WHERE MID = (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, myb us.MYIM_mybus M WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2 AND M.MID = Q.MID AND Q.MSG_STATE = 0) AND MSG_STATE = 0
Here's the sql for the query statspack report. Note that there is only one table (MYIQ_mybus) mentioned in the implementation plan.SELECT QID, MID, MSG_STATE, MSG_STATE_WHEN FROM mybus.MYIQ_mybus WHERE MID = (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, mybus.MYIM_mybus M WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2 AND M.MID = Q.MID AND Q.MSG_STATE = 0) AND MSG_STATE = 0
RgdsSTATSPACK SQL report for Hash Value: 998768410 Module: java@myfabbus (TNS V1-V3) DB Name DB Id Instance Inst Num Release Cluster Host ------------ ----------- ------------ -------- ----------- ------- ------------ MYBUSPRD 2074549195 MYBUSPRD 1 9.2.0.5.0 NO mydm01 Start Id Start Time End Id End Time Duration(mins) --------- ------------------- --------- ------------------- -------------- 41 13-Jan-10 08:32:14 42 13-Jan-10 09:02:15 30.02 SQL Statistics ~~~~~~~~~~~~~~ -> CPU and Elapsed Time are in seconds (s) for Statement Total and in milliseconds (ms) for Per Execute % Snap Statement Total Per Execute Total --------------- --------------- ------ Buffer Gets: 405,851,843 204,356.4 92.38 Disk Reads: 0 0.0 .00 Rows processed: 1,593 0.8 CPU Time(s/ms): 1,069 538.4 Elapsed Time(s/ms): 1,120 563.9 Sorts: 0 .0 Parse Calls: 121 .1 Invalidations: 0 Version count: 1 Sharable Mem(K): 34 Executions: 1,986 SQL Text ~~~~~~~~ SELECT QID, MID, MSG_STATE, MSG_STATE_WHEN FROM mybus.MYIQ_myb us WHERE MID = (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, myb us.MYIM_mybus M WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2 AND M.MID = Q.MID AND Q.MSG_STATE = 0) AND MSG_STATE = 0 All Optimizer Plan(s) for this Hash Value ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Shows all known Optimizer Plans for this Hash value, and the Snap Id's they were first found in the shared pool -> ordered by Snap Id Plan Hash Value Snap Id Cost Optimizer ------------ -------- ---------- -------------------- 4280385364 3 2 CHOOSE Plans in shared pool between Begin and End Snap Ids ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Shows the Execution Plans found in the shared pool between the begin and end snapshots specified. The values for Rows, Bytes and Cost shown below are those which existed at the time the first-ever snapshot captured this plan - these values often change over time, and so may not be indicative of current values -> Rows indicates Cardinality, PHV is Plan Hash Value -> ordered by Plan Hash Value -------------------------------------------------------------------------------- | Operation | PHV/Object Name | Rows | Bytes| Cost | -------------------------------------------------------------------------------- |SELECT STATEMENT |----- 4280385364 ----| | | 2 | |TABLE ACCESS BY INDEX ROWID |MYIQ_MYBUS | 1 | 26 | 2 | | INDEX UNIQUE SCAN |MYIQ_MYBUS_I1 | 1 | | 1 | -------------------------------------------------------------------------------- End of Report
Ung
-
Group of employees by Department, but show only once the dept
Hi gurus...
I have a query that returns the following result set...
DEPT # EMP #.
------------------
10 101
10 102
10 103
20 201
20 202
20 203
However, I need to have my result set as follows, i.e. present dept # only once for a list of employees in this Department...
DEPT # EMP #.
------------------
10 101
102
103
20 201
202
203
Please suggest me the functions should I use to achieve this... Appreciate your help in this reqard...
Thanks in adavance.
VivekSQL> with query as 2 ( select 10 dept#, 101 emp# from dual union all 3 select 10, 102 from dual union all 4 select 10, 103 from dual union all 5 select 20, 201 from dual union all 6 select 20, 202 from dual union all 7 select 20, 203 from dual 8 ) 9 select case row_number() over (partition by dept# order by emp#) 10 when 1 then dept# 11 else null 12 end dept# 13 , emp# 14 from query 15 / DEPT# EMP# ---------- ---------- 10 101 102 103 20 201 202 203 6 rows selected.Kind regards
Rob. -
I can not save the background sound on R500 27175GU
Hi all
I've been looking for a solution for a long time but no answer. My laptop Lenovo R500 27175GU, OS is XP pack 3. Audio device is Conexant 20561 Smart Audio HD. The problem is I can not save the background music but can record microphone (IE I can not record sound from the speaker). When I explore the Volume control, I see that I have just two mixer device: Conexant HD Audio Output, Conexant HD Audio Input. When go to Conexant HD Audio Input, I have only microphone for recording. Can anyone help me solve this problem so that I can record the speaker, please let me know.
Thanks in advance.
Because your laptop is not the software that does what you want.
Maybe you are looking for
-
Summer burn some Media Player CD... well 'til now. Select my list of 'Burn', put the CD in the tray and close; Click "Start burn"... then it gives me a message that I need to put a blank CD in (just open a blank CD pack), I then open and close the dr
-
BlackBerry Smartphones download programs
Hello Is there anyway that I can use my phone to download applications like poker? I downloaded a poker app to play for fun, and I can't find the file anywhere on my phone... It is a .exe file and said it saved on the card of support, but I can't se
-
Smartphones BBM blackBerry service
I was wondering if the BB Messenger service is free in Sweden? Telenor is my ISP. I can BBM with my friends in other countries for free?
-
I can't last for CS6 PS camera raw plug.
I tried going to help > updates, but that only brings up the cc apps. I don't have Photoshop CC. On my old PC by going to help > updates, he brought up Adobe Application Manager, which worked perfectly, but it doesn't work on my new PC. I understand
-
Record WLST scripts for the card settings
HelloI'm new to the WLST Script recording tool.I am trying to save my settings for JmsAdapter create a new Pool of outbound connections, but the registration tool does not seem to be able to capture changes in the settings of the map file is empty af