I can't tell if ad hoc does not work, how do I know if the files are shared?
I have files shared between a computer with Windows7 and the other with Vista. I followed the instructions of preparation for each computer for file sharing process. I have set up a network of working groups and they both have successfully connected. The problem is that I can't tell if they recognize the other computer and when I go the file to share, I can't have information about the files on the computer in the face. Yes, computers have seen and write options in the file to share. When I try to access some forms in the file I can't the information I'm looking for on the files on the computer in the face. How will I know if the computers are connected to the file sharing?
Hello
Were there any changes made on the computer before the show?
Method 1:
I suggest you to refer to the links and check if it helps:
File sharing essentials
http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone
Method 2:
I suggest you to refer to the article and see if it helps:
Networking of computers running different versions of Windows
Method 3:
I also suggest you to check the settings of firewall on the computer. I also suggest you to disable the third-party firewall installed on the computer and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
Tags: Windows
Similar Questions
-
He continues to tell me bho.dll does not work how to fix this
my computer is slow real work and continues to tell me BHO.dll does not work and restore it. I don't know how he also said IE3. SH.exe is not working?
Hello
· There the latest changes on the computer before the show?
Error starting IE3SH and BHO.dll can occur due to problems in the installation of some programs on the computer. Follow these methods and check if that helps.
Method 1:
Follow these steps and check if that helps.
Step 1:
I suggest to start the computer in Safe Mode with network and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135/en-us
Note: Don't forget to start your machine in normal mode by following step 7 of the link.
Method 2:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
-
I went to the automated correction, it but still no change
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Please make all below even if you have done some before as it is often the set of operations which solves the problem.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
My 3D does not work in Photoshop CS5. All the options are greyed out
Hello
I just install photoshop CS5 but find my 3D does not work, all the options are greyed out. I checked in the openGL preference menu but still not working. I have core i7 and intel HD graphics 3000 with up to 1760 MB video memory dynamic. Help, please
Do the RGB active document?
Could you please post a screenshot with the relevant panels/Menus visible?
-
simple? can someone tell this simple btn does not work why?
Writing my own deactivation button class (with the help of friend - thank you LuigiL)
So, why does my button not turn off when you click it? He runs the deinitializeBehavior function, but the removeEventListeners are not really deleted...
I don't know why, but this could be a graphic problem?
Thanks in advanceDisables the button attached, but you must change the activation. Because event handlers are removed, the button cannot reactivate itself.
-
Can someone tell me why it does not work?
Working on a project where an icon action depends on the State of another icon. For instane-there are three doors on the scene, with the ability to turn red, blue or green. If the first door is blue, then third opening of the door if it's the same color. If the second door is red, then third opening of the door if it is the same color, etc. Using conditional statements came up with rough code, but encountered a wall. Have not been able to find the right commands to the code base on the labels.
The following two files contain less than 15 lines of code. I would appreciate any advice anyone with a handle on the subject.
The first is that I got with the code still works:
http://www.filedropper.com/sampledoorworks
This version is where everything takes a turn for the worse:
http://www.filedropper.com/sampledoordontwork
I don't know how show you the code relates to three doors and the line... If ('one') {fly anywhere.
You need to assign instance names to the doors so you can target their code. Let's say that you name door1, door2 and door3. If the idea is to check if the two doors are the same color (frame) then, you could do something like...
if(door1.currentFrame == DOOR2.currentFrame) {}
do something for doors 1 and 2
of other if(door1.currentFrame == door3.currentFrame) {}
do something for 1 and 3 doors
of other if(door2.currentFrame == door3.currentFrame) {}
do something for 2 and 3 doors
}
-
I'm worried that maybe I need to upgrade my computer before you upgrade to Windows 7, so I would really like to Upgrade Advisor to tell me what I need. But whenever I try to run it, it just turns and turns and turns (I mean, more than two hours) without ever come up with anything. So what I do now?
If you want to know if your computer with Windows XP will be able to handle Windows 7, check system requirements Windows 7 on http://windows.microsoft.com/en-US/windows7/products/system-requirements.
Compare with your own system, right-click on the icon for my computer and then click Properties.
As long as you an update from XP to 7, the only option you have is Custom installation so there is no sense to the current programs with Windows 7 compatibility check. The thing you should be concerned is the material part. Check the 3 main material that requires compatibility: CPU, RAM and disk space.
-
On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox.
Firefox cannot renew its tabs and now won't run and let me do a backupThis may be considered to be solve my problem.
I decided to uninstall the rogue program Firefox download and reinstall the same version (No. 8). I used Windows XP Add Remove programs who asked if I wanted to save the settings of Firefox until I uninstalled Firefox. I said yes and operated with the uninstall. I couldn't find a Firefox 8 so I went for the 12 version and installed on the laptop. This version 12 now works with all the passwords one favorite of the uninstalled 8.
Thank you for all your help and advice. -
Original title: winhttp.dll does not work how can I down load it
I have win xp winhttp dll I can't use adobe or yahoo.
Once more, the response from the Support Engineer with a link to an article that does not help is marked as 'response' by a moderator of the Forum after 6 days of inactivity when it isn't the answer to everything.
It's a real shame the way things work around here. If I were Microsoft and "indulged" these technical support engineers who regularly publish responses that are unnecessary and they are marked as 'response', I think that I would call off the coast of the commitment. "
Usually, it's just not worth reading these Support Engineer 'Answers' as they are not even close. They are usually just wild goose hunting.
WinHTTP.dll if missing some things just will not start:
BITS service (Background Intelligent Transfer Service)
Automatic update serviceIn the Event Viewer system log, you will see tings like this:
Service
Cannot start Service on Local computer Background Intelligent Transfer.
Error: 126: the specified module could not be found
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7023
Description:
The Background Intelligent Transfer Service is completed with the following error:
The specified module could not be found.The automatic updates Service hang and displays "Start" in the Services applet:
Event type: error
Event source: Service Control Manager
Event category: no
Description:
Automatic Updates service hung on starting.CS5ServiceManager Adobe Dreamweaver Service Manager (and perhaps other Adobe startup items) not start and displays error message like this:
CS5.5ServiceManager.exe - Unable to locate component
This application has failed to start because WINHTTP.dll was not found. Reinstalling the application may fix this problem.Running sfc/scannow will not replace the winhttp.dll file missing. I know because I tried.
I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):
c:\Windows\System32
c:\Windows\System32\dllcache (this is where XP keeps backups of important files).Here is the link to my SkyDrive and you can get the file you need here:
http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called winhttp when the name of the file should really be called winhttp.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
You then put the downloaded files in the correct folders on your system.
-
i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again
Hello
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
I upgraded a genuine copy of Vista to Windows 7 Home Premium. I gave my 30 days of registration lapse. Now I can't save and my IE does not work. What should I do?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) explain your question clearly to the support person.
Note: this won't cause IE to notwork.
-
I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem
You have a version of Tally that had no support of the years. If you want to continue with the Tally, you will need to upgrade to the latest version...
This seems to be the official site... http://www.tallysolutionss.com/
It may be more friendly... http://tallyworld.com/
-
I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem
Hello
Thanks for posting in the Microsoft community!
I'm sorry to hear that tally 7.2 does not work with Windows 8. I hope that the steps helps you to solve the problem.
Before troubleshooting, provide us with information.1. what happens when you try to use tally 7.2?
2. you receive an error message?
3 is the issue limited to match 7.2?
You can check if the software is compatible with Windows 8.
Make the programs more compatible with this version of Windows
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-usIf this is not the case, try to run the program in compatibility mode.
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-WindowsCheck the event viewer for error logs.
a. move the mouse to the bottom left of the screen and right click to see a list of options
b. Select Event Viewer
c. click an event log in the left pane
d. double-click an event to view the details of the event. Events are classified as error, warning, or information, depending on the severity of the event.
Let us know if the suggestion provided was useful. If you have additional questions, we will be happy to help you.
-
Hoi
Adobe Creative Cloud is full of photos would like to delete, but this does not work, how can I do?
Thanks Wim
Move this thread for: Adobe Creative Cloud
-
my serial code does not work how can I make it work
my serial code does not work how can I make it work thank you
Hello
If you have a creative cloud subscription then you do not require a serial number to activate it, all you need to do is sign with your ID (Email used at purchase) Adobe in creative application Cloud to activate your membership. See,
Connect and disconnect activate Cloud Creative applications
Solve common problems of activation and deactivation of creative cloud.
Activation and deactivation of troubleshooting
Find solutions to activation errors that may occur during the launch of Adobe applications.
I checked with your Adobe Id on the forums that there is no active subscriptions to this topic.
If you have any other Adobe id try please activate the products with that.
Kind regards
Bani
Maybe you are looking for
-
Firefox beta 35. not ready for prime time.
I spent all weekend trying to get the beta version of Firefox 35 to work. What I found is that * extensions of all it does not work with the exception of the maintenance of the premises. I can't download any extension that Firefox is so famous. The e
-
How can I reset the default search on the homepage from Firefox to Google?
I recently had to uninstall the Yahoo forced on me without warning by an application toolbar, but this remnant seems to have permeated in the
-
JavaScript error when starting Firefox 5
I just updated Firefox to 4.0.1 to 5. Now when I run Firefox, you receive the following error message: JavaScript applicationTypeError: Components.classes['@ [cid] is undefined When I click the OK button, Firefox support. It seems normal and seems to
-
Cannot call groups, cannot discuss in groups, cannot accept calls
Wow, it's frustrating. For the past 2 weeks, I have not been able to make group calls. I can call people, but no groups, the buttons are gray. When someone calls me, in a group call, I can't accept the call, there is no button to accept, see attached
-
LG 29UC97C - 29-inch ultra wide monitor problem with Mid 2015 MacBook Pro retina 15 inch laptop
Hi guys,. I searched for this problem, but could not find anything on the net. Every time that I turn my monitor on my MacBook turns on as well, but after some time (15-20 min) TI off awards and who says no signal. So, I have to turn my monitor marke