I can't turn on location Services

Similar Questions

• Unable to turn on location services

  I upgraded to 9.3.3 yesterday. Today I was downloading an application that requires location services to be turned on. Applications are defined correctly in regards to my preferences, however whenever I put the main location of active Services button, it turns off when I get out.

  Very frustrated!

  Thank you.

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

• Error different when GPS location service is disabled

  Hello

  I wear my android app to BB10 is vased location services. So when I disable location services in android it gives me the error message like this: "the phone GPS must be enabled" and likewise I turn off location services in BB10 it gives me the error message like: "lead-time of the GPS position.

  So, what is in question in the present?

  The problem is that the Android location provider enabled / disabled does not match the OS Settings.  So if it enabled in Android, but disabled in the operating system, Android assume should be able to access these data.  It can not.

  This is a bug / control setting that activating / disabling the setting is not turn the Android operating system.

  Edit: The development team knows about this problem and a solution is being developed for a future version.

• I downloaded macossierra yesterday. Siri is asking me to allow location in settings and privacy, but I can't tick enable locations.  It is grayed out. help is needed

  I downloaded yesterday sierra of mac os.  However, I asked Siri what the weather conditions were in my position. She said that to go into the settings under Security and confidentiality and allow my place.  I did, but I'm not able to check the enable places.  It is grayed out.  Does anyone else have this problem.

  Hello dogsandcats,
  Thank you for using communities of Apple Support.

  I understand your message that you are not able to activate location Services within the parameters of security and privacy on your Mac. I know how it is important for you to be able to turn on location Services. When you go to System Preferences, then Security & Privacy, make sure you click on the padlock at the bottom left and type your admin password. Then you should be able to turn on location Services.

  On location in OS X and Safari Services
  

  Activation of location Services

  Follow these steps to turn on location services in Mountain Lion OS X or later

  1. Choose System Preferences from the Apple () menu.
  2. Click the Privacy & Security icon in the System Preferences window.
  3. Click the Privacy tab.
  4. If the icon of padlock in the lower left corner is locked (), click on it and enter an admin name and password to unlock ().
  5. Select location Services.
  6. Check the box "enable location services".

  Best regards.

• I can't turn off the location-aware feature in Firefox 4.

  I tried the technique suggested for Firefox 3.6 and the browser continues to display my ads tailored to my place. If I can't turn this off, I'll move from browsers.

  There are two ways that your location can be determined. One is through the geo-location feature, which uses WiFi signals on mobile devices; does not work on desktop computers unless you have a wireless card installed. Geo-location can be turned off in Firefox.

  The other is the IP address of your connection, which cannot be disabled in Firefox. You must use a Proxy Server / service to act as the intermediate connection to hide your real IP address. It would be easier to use Adblock Plus and just to hide these ads, then to mess with use of a Proxy, IMO.

  Will not be very different with other browsers.

• Cannot turn off the location Services on the new iPhone

  For some reason, there is no way to disable the location Services on new iPhone 6 s daughter. We have switched/updated sound from an old iPhone 5, but were sure disable settings find my phone/Find My Friends. In addition, iPhone 5 has been wiped clean. However, location Services are unable to be activated off the coast on the new iPhone... the toggle switch is "grayed out". Even in circles iCloud, even in the General settings.

  The idea was to find it on my friends for the new phone, but this is not possible, since it states that this service is managed by the iPhone 5... is no longer active. No matter what I try (reboot, reset location/privacy settings, turn off all network connections), I am unable to adapt localization Services (On / Off) and subsequently, the share location parameter.

  3 other phones that we have obtained (6s as well) do not present the issues and working properly, including the activation of location Services button.

  Hi, pairof9s.

  Please visit Apple support communities.

  I understand that you can't change the setting of location Services on iPhone again your daughter 6 s.  It looks like may have restored the old iPhone backup and restrictions are activate that prevent changes to certain characteristics.  You can check by going to settings > general > Restrictions and see if they are enabled.  You can then temporarily disable restrictions you can change this setting.  Take a look at the article below for more information.

  On Restrictions (parental control) on your iPhone, iPad and iPod touch

  In regards not being not able to find my friends, you need to maybe just remove the iPhone 5 find it my iPhone via iCloud.com service.  Take a look at the article below for instructions on how to remove the device.

  iCloud: remove your device, Find My iPhone

  See you soon

• I can't 'Windows Security Center Service' to turn on.

  I get a warning message on the taskbar, declaring: "TURN ON CENTER OF SECURITY WINDOWS SERVICE.  (IMPORTANT). But whenever I try to click on, I get the same message saying: "WINDOWS SECURITY CENTER SERVICE DO CAN DO NOT BE TURN ON". Please can someone advise? I tried everything last week. Thank you. Dazpicton.

  Hello

  ·         When did you start in this topic?

  (1) check if you can manually start the service. Also check the dependency services.

  a. type Services in the search field and press ENTER. You will need to click on continue if you are prompted to open the Services window.

  b. in this window, you must locate the Security Center service right click and select Properties.

  c. now, select automatic, and then select start. When the service fails to start, you will receive an error message.

  d. also, click the Dependencies tab and check if everything which are started and set as auto.

  Post the error information here so that we can better understand why the service fails to start.

  (2) as a Virus scanner.

  You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I install MS Reporting Services to another location, like E:\Program files?

  Can I install MS Reporting Services to another location, like E:\Program files?

  Hello

  To improve assistance to this topic, I suggest you post your question here.

  SQL Server Reporting Services

  http://social.technet.Microsoft.com/forums/en-us/sqlreportingservices/threads

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Reminders in the absence of list of location Services

  I try to activate reminders of location based in ios10 on my iphone 6s, but when I go into settings-> privacy-> location enabling services I don't see recalls on the list of applications.  Location service is activated and I changed my sync reminder to iCloud only (rather than Exchange), but it is yet to appear.

  When I go into settings-> privacy-> reminders, all I see is gray text saying "The apps that have requested access to your reminders will appear here."  No other option.

  Someone has ideas of how I can receive reminders to appear on my list of location-based services application so I can enable location based reminders?  Thank you!

  Hello kevdoog,

  Thank you for using communities of Apple Support. It is my understanding reminders is no longer an option of location service after update to iOS 10. I often use the location based reminders, I can certainly understand your concern. I'm happy to help you to get this resolved with you.

  First of all, I recommend you reboot the phone. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, reset location Services by going to settings > general > reset > reset card and privacy. Once this is done apps will be stop using your location until approval is granted.

  Have an amazing day!

• Solution on how to remove always on location service in the status bar

  Think about the last apps that you use which has led to the appearance of the purpose of the location in the status bar

  The problem is most likely due to resources are still used by these applications even if you restart your iPhone, many times

  The sign of location service can keep here.

  I tried the solution without help.

  It's a chance that I remembered the last apps I used is Runkeeper

  I went to this apps and ended.

  The problem can be solved.

  Disable background refresh App

  And also go to turn OFF the location for that Service the app & confidentiality if you think that location services is not useful for the App

• Can I disable the Terminal Services if I don't use remote assistance/remote desktop?

  I use can I have Vista 32 bit home premium

  I thought that Vista have no remote desktop? Is not Terminal identical remote desktop services?

  When I go

  MyComputer > right click > properties > remote adjustment

  the box for "Allow remote Assisnatnce" is NOT COCHEE

  But when I run Netstat - ano, I see that port 3389 is listening svchost.exe process when I checal what services are related to this particular svchost.exe, I see the following services:

  Cryptographic services
  DNS client
  network location awareness
  KtmRm for distributed transaction coordination
  telephony

  and Terminal Server services

  Seems to be at a point several years ago, I allowed someone from microsoft to help me through the assistance at a distance could therefore have enabled or downloaded services Terminal Server?

  In any case, I think that Terminal Services is initially port 3389 to remain open and thus get an unsolicited connection attempts from different IP addresses.

  I tried a little experiment and finished the Terminal Services and changed the status of manual start-up. When I still ran netstat - ano, he showed no listening on port 3389

  However, when I rebooted my computer Terminal Server was running again. So I ended it again but this time off the service. When I fell net stat - ano he showed terminal services does not. then when I restarted my computer, Terminal Server services do not have turn on port 3389 has not been shown that listening

  SO my question is, as a user of Vista which doesn't use remote help desk or remotely.

  1. I CAN keep the disabled Services Terminal Server?

  2. it cause me any problem of operation or security if she stays in the disabled state?

  3 have disabled will cause me to not be able to get the scheduled updates?

  Thank you

  But I have been informed by Norton Personal asa require a Terminal Server Services be, nit for the part of remote assistance, but for other reasons. They say I can't turn off

• I can't turn on my windows Defender. When I try I get a message came 'Set Association Control Panel leader' what this means and how do I do it please

  My windows Defender is disabled. When I try to turn it on, I get a message saying "Set File Association Control Panel" so I can't turn on.what does this way please. ?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows Defender turned OFF and I can't turn on. Is it because I have downloaded Windows Security Essential? If so, how can I uninstall Windows Defender, and then reinstall it.

  My Windows Defender turned OFF and I can't turn on.

  Is it because I downloaded Windows Security Essentials?

  If yes how can I uninstall Windows Defender from my computer because it does not show in the control panel

  Hello

  MSE disables by default the Defender

  and no you can not uninstall then reinstall the Defender

  It is part of the vista operating system

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• BlackBerry Z30 battery saving mode uses "location services", although not active

  Hi all

  Although exclude/disable battery saving mode settings location service monitor says the opposite. Each time that the savings mode "location services" use about 30% of all resources during these times.

  Bug or "feature"? ".

  Thank you
  Sandro

  Hmm, you can try to reset

  Turn off battery saving mode--> press and hold down the power button until the red LED is displayed, the device restarts and appearance of the logo blackberry and telephone lights--> ride on battery saving mode (with off location services), and then monitor the battery consumption again.

  Can bring back you after that?

  P.S.: Do not try the restart process if you are on a low battery due to some black screen issues that some users have on this forum.