I can't use debit instead of credit card card because I am a student and I can't afford credit card

Similar Questions

• Dell XPS 9530 - Games using integrated instead of GeForce card

  Hello

  I have a new Dell XPS 9530 with integrated graphics Intel 4600 and GeForce GT 750 M. 8.1 Windows media center, 64-bit.

  When I start a more demanding game I get good performance for a few minutes and then it comes down to something like 10 frames per second. After leaving the game, I can see this blue icon in the system tray representing the Intel graphics. That's how I came to a hypothesis that the Intel card is used in the games.

  In NVIDIA Control Panel, I put "processor NVIDIA high performance" as a favorite graphic processor, but it has not changed a thing. I have the latest drivers and up-to-date experience of NVIDIA for the last.

  It's rather disappointing to have a good material but not being is not able to use it.

  Does anyone have an idea how to apply Windows to use the GeForce card in the games instead of the Intel low one?

  My XPS 15 is presented a few weeks ago.

  I had problems of limitation.  Games would be solid for 10 minutes and then slide down to 10-20 fps.

  I found a solution that works for me, however.

  I use NVidia Inspector to limit the framerate at 30 frames per second.  Now, it runs at 30 fps for hours, instead of 60 frames per second for 10 minutes then 10 frames per second.  http://www.Guru3D.com/files_details/nvidia_inspector_download.html

  Even require as the MWO and citizen of Star games run perfectly at solid 30 fps for hours without limitation.

  Hope that helps.  Would be even better if Dell put in a cooling sufficient in these things, however.  Of course, the GPU is much more capable that allows cooling.

• I can see is no longer the address of the web page I'm on. This is vital because I am a student and often need to cite the web page, I am visiting.

  When I search the Web and I take my destination of search, the search box only shows no address http I am on. I need this information to cite that I am on the page. What should I do the fix for this issue.

  Some add-ons can cause this. The problem goes away when you restart Firefox with Add-ons disabled?

  • The problems of Firefox in Mode safe

  If so, you can either remedy suite to find the problematic add-on, or you can reset Firefox to ignore all of the Add-ons and preferences while maintaining data essential as Favorites and passwords.

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Reset the preferences of Firefox to troubleshoot and solve problems

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• Can I use App Store/iTunes credit to buy space iCloud?

  I think the upgrade of my storage drive to iCloud and want to use some App Store credit I have left more. Is it possible to buy a storage iCloud with this method of payment plan (and if so, how) or could it be charged on my credit card?

  Paul_the_Mac wrote:

  . Is it possible to buy a storage iCloud with this method of payment plan

  Yes.

  iCloud and pricing - Apple supported storage plans

  Methods of payment accepted for upgrades of storage iCloud include credit, debit cards and the iTunes Store creditcards. If you have enough iTunes store credit to perform your upgrade, you will be charged the remaining amount. Apple Store Gift cards are not accepted as payment for the upgrade of storage iCloud. Learn how manage storage space you are using.

  Your iTunes credit should be automatically used first to pay for the upgrade of storage iCloud.   As long as there is enough credit it will use for future payments, otherwise it will charge the credit card if possible.

• How can I make firefox use http instead of https?

  In internet business, it is problematic to use https.
  However firefox by default always to https connections (for example during a google image search in the toolbar search, or when you type an address bar starting with "www"); so always raise an alert page "this connection is untrusted" and make me go the address bar manually and change the 'https' in the 'http'.
  In Google Chrome and Internet Explorer, it is very easy to install the browser to use http instead of https protocol. However, I can't find this option in firefox. Any ideas?

  There are two different parameters involved:

  Address bar Autofill

  If you used HTTPS to a site before, the AutoFill feature to Firefox address bar will prefer the HTTPS address. If you don't mind by selecting from the drop-down instead, or just type the address in full, you can disable AutoFill the address bar. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the AutoFill and make a pause so that the list is filtered

  (3) double-click browser.urlbar.autoFill from true to false.

  Search from the address bar

  About the address bar search, you can change the URL used by the 'key word' service. Please see this thread for links: unable to connect to the proxy because of the automatic https.

  That solve it?

• I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

  I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

  I thought it would be FAFSA is causing your problem.

  Install Portable Firefox 3.6.x on your hard drive to a Web site. This will not affect any of your current Firefox installation.
  
  http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• How can I send five simple characters (P, H, O, T, O) using ComWrt, instead of sending a single string?

  The manual of instrument mentioned that "for switch mode remote"P","H""O""T","O"are sent as single characters and not as a single string". How can I send simple characters using the Serial Port, rather than send a single string?

  I have no CVI installed on this pc, and in the past, I used VISA instead of the ComWrt. If you know how to write a string, then I don't see where is your problem. You write only 5 channels instead of one--each with a single character.

  You can post to the ICB card if you have problems with C.

• Can I remove internet explore and use chrome instead?

  Can I remove internet explore and use chrome instead? That is, crashes, to stop, resarts and slows my computor. I installed Google Chrome and have had no more problems. It opens and closes when I want it and going to the Web pages as I type in without hesitation. I like windows 7, I only have a problem with Internet Explore. It also caused changes in my modem. I need to uninstall the software and reinstall to get it working again. IO would open that is and get a message that says "no internet access - check your settings, I thought it was a virus at some point. As soon as I started using Chrome, everything worked again. That is also caused problems with my printer and home network. I don't mind that is being stored in a file, I don't want to work and make changes to my computer I'm not an it expert by any means. I restored my pc to an earlier time and new conditions of factory several times in the past year (I bought the HP pc new in December 2010).

  It is not really a way to remove Internet Explorer.  I have not heard of the type of problems, you had with IE, but if you prefer Chrome and who works for you, all you need to do is to make Chrome the default browser.  I use Firefox and make it my default browser.  Once you make Chrome default you just leave Internet Explorer installed but it won't get used.  Following comes the site help Chrome and tells how to do it by default: http://support.google.com/chrome/bin/answer.py?hl=en&answer=95417

• can we use DIV instead of tables in the APEX

  Morning friends,
  
  can we use < div > instead of using tables in the APEX. If so, let me know da procedure. Please make me understand in layman's term, as I just started learing APEX.
  
  Greetings
  Jean francois

  As I said in the first line of my first post:

  Yes, you can. You must do this in page templates, region or report on shared components of the request of the manufacturer.

  If you look at, you'll see the models and all the table tags HTML. I would say that you copy a model at a time and work with your copy so that you don't the hose upward standard Apex stuff.

  Earl

  Published by: Earil on April 9, 2009 08:57

• Using DVI instead of VGA on the Port Replicator - Tecra A9

  I have a port replicator toshiba that I use with my laptop Tecra A9, currently I have a vga cable to run the external monitor, but I prefer to use DVI instead, but I can't make it work.

  Is there a setting somewhere that I have to activate? or should it work?

  See you soon

  Ash.

  Hello

  As much as I know there nothing that you must set for the use of the DVI port. The question is how you use it. Using a DVI - VGA adapter?

• How Windows XP Setup (F6) to use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard

  Hello

  How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.

  Kind regards
  Imane

  Hi Mike,.

  You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use Readyboost instead of paging fie?

  I connected the USB and that it be used for Readyboost.

  But when my computer is failing on the memory it uses the page file instead of using the space to readyboost.

  How can I use readyboost instead of the swap file to be used as virtual memory.

  In addition to what Gerry C J Cornell and Palcouk said,

  If your system could use the storage as Ready Boost, when you plug the USB device, AutoPlay jump upward and you will see the options under:
  General options:
     Speed up my system
      using Windows ReadyBoost.

  If you don't see this option, your system can not we the as a Ready Boost device USB storage device.

  Thank you

  Marilyn

• It is possible to write data to files on a local computer using util_file instead of the server?

  Hello

  I use oracle 10g. It is possible to write data to files on a local computer using util_file instead of the server?

  Concerning

  PL/SQL is a programming language on the server side. So the answer is no if you have a shared drive on your server that points to your client you can. But that opens all kinds of security problems.