I copied the old file of passwords in the new profile, but do not see.

Similar Questions

• problems after upgrading firefox. reset this is ugly. created the new profile, but can not recover data from old profile.

  I use firefox on a MacBook pro. Mac OS X version 10.7.5. There was an update of firefox on a day or 2 ago. Since this was done, I was getting 'syntax error' 5 times, each time that a page has been loaded. Some research has suggested that an application or a plug-in called "social fixer" might be the problem but I could not understand how to get rid of it so decided to try to reset Firefox. Minutes passed and a message was on the screen saying the old files of firefox have been been "cleaned" or something, but it seems to be 'stuck' because the progress bar was little jerky. Doesn't it usually doesn't. So I clicked on "Cancel". After that, I couldn't even firefox to start. Looks like my profile is unavailable or inaccessible. Following the instructions found on the support site, I created a new profile and I thought I copied the files from the previous firefox on the new profile, but when I run firefox, it's a blank slate. None of my bookmarks or passwords are there. It must be here somewhere, but I can't seem to understand.

  Looks like there was a problem with updating the profiles.ini file.

  • http://KB.mozillazine.org/profiles.ini_file

  You can try to remove the current profiles.ini file to force Firefox to create a new default profile where Firefox has not done that.
  You can check if there is a profile folder with a number of attached time stamp and in this case, you can set the location of a profile created in this folder.

  • http://KB.mozillazine.org/Recovering_a_missing_profile
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you need to recover data from an older profile, always in the default location, or as a folder of old data of Firefox on the desktop then see:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• problem with the copy of the mots de passe from the old to the new machine.copied key3.dd and signons.sqlite from the old to the new profile, but firefox does not recognize their

  a lot of hassle copying old profile to the new machine... Finally overcome bookmarks but failed to get the passwords recognized... followed advice old conversation community how much/little to copy from the old to the new, with no success

  You copy both files to the correct location?

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  If you still have access to the old computer, then try this extension:

  • Password exporter: https://addons.mozilla.org/firefox/addon/password-exporter/

• address book transferred to the new office, but may not transfer to treo

  Just got a new computer with Vista 32 bit and installed Palm desktop 6.2.2. I transferred my address book via the usb port on my old computer and it appeared in the new palm desktop, but it will not move on the Treo 755 p with HotSync. However, I noticed that on the new version of office, the address book is called 'contacts' and it appears on the new office so that the address book imported. But I want that all my data to consolidate and I can't do that. Any suggestions?

  I'm sorry, but how do I export the data as a. CSV file? I put on a USB stick and transfer this way?

  Message is about: Treo 755 p (Sprint)

• Firefox crashes, impossible to create the new profile, reinstall does not work, can't get into safe mode

  Whenever I try to open Firefox, it only open the crash reporter. When I press "Restart Firefox", it just opened another journalist to crash. I use a PC.

  I tried all of the following characteristics, does not:

  1. reboot the computer
  2. system restore
  3. Uninstall and reinstall (done this several times)
  4 remove the Firefox installation folder
  5. try to create a new profile / use the Profile Manager using "C:\Program Files\Mozilla Firefox\firefox.exe" - P, firefox.exe-p and firefox.exe - profilemanager - and all of this was, once again, open the crash reporter
  6 safe mode - literally impossible even to open Firefox so I don't know how I could do that

  I am at a loss. Any help would be greatly appreciated.

  OK, if %AppData% does not lead you in the right place you can also manually navigate to the folder with incident reports (you may need to turn on the display of the first hidden files). It is located in C:\Users\ < your user name > \AppData\Roaming\Mozilla\Firefox\Crash Reports\submitted...

• DVD autorun.exe opens main html.menu very well, but when click on hyperlink in the menu it opens the new tab, but does not play a video, but the video html works directely

  Autorun.exe DVD opens with main menu.html. then when I click 1. HTML which is ment to start (from the main menu.html) only to open a white page only and plays not the file using src = flvplayer.swf player flash video. (it works on all other browsers) fine. Installed the flash plugin but still does not not in Fire fox. But when I navigate to the root of the cd and click 1. HTML it opens and plays very well, but do does not form the main menu.html. any help would be grat

  Thank you

  In your main.html:

  • What is the URL in the address bar?
  • What is the URL of the link?

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• can hear the video playback, but do not see it! Help!

  My hp camera, I have several videos.  When I transfer to the computer and play them I can hear audio, but not see the video... just a black screen.  After some googling, I figured out to re - format my sd card to be compatible with vista, so now I take videos play, but I need to know how to read downloaded videos on the computer until the card has been reformatted.  Thanks in advance for any help, as I am now just frustrated by this whole process.

  My hp camera, I have several videos.  When I transfer to the computer and play them I can hear audio, but not see the video... just a black screen.  After some googling, I figured out to re - format my sd card to be compatible with vista, so now I take videos play, but I need to know how to read downloaded videos on the computer until the card has been reformatted.  Thanks in advance for any help, as I am now just frustrated by this whole process.

  N ° do not jump again.
  Discover your videos file extension. The video format must be supported by Windows Media Player or Movie maker to be able o see the video.

  Get a FREE video converter and converter of your videos in wmv format. WMV format is the most reliable format for Vista.

  t-4-2

• Print server attached to the new network, but do not find add printer printer

  After an upgrade to a new router (a Netgear N600 Wireless Dual Band Router WNDR3400), I spent a LOT of time trying to make everything again to talk with each other.  I've gotten to the point where all the wireless devices PC AND my WPS54GU2 print server are all properly connected (I can log in from another PC print server and print a test page).

  Unfortunately, I was completely unable to add the printer connected to the print server to the same PC that can open a session and ping the print server.  The wizard does not find just any network printer and when I type in the name of the server and printer I get the error message "the server for the printer"Print Server Null driver"doesn't have the printer driver installed."

  What I'm doing wrong here?

  BTW - I wasn't happy that I had to lower the security of the new router WEP wireless, or that it only took the key to SPELL as the paraphrase, but I also noticed that the print server was not a option for the safety of new protocols there was an upgrade of the firmware available.  Are there new print there servers work better with better security protocols?

  Thank you

  Craig

  If the installation wizard is not able to detect the printer connected to your print server. Make sure that the "printer" is correctly plugged into the PS and the Led for the same are lit on the PS.

  Second, you can try to configure a TCP/IP port to make the printer work.

  Start by defining a static IP address on the PS, and then set the TCP/IP port. The same link is given below:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=bb9993cc2c764dfab25dcb22d8eb0d35_4175.XML&PID=80&r...

  Then, this model does not support the WPA or WPA2 Personal. You can go for WPSM54g that supports both the level of encryption that I mentioned here. See the screenshot below.

  

• Installed on the new laptop, but will not work as wireless? It does not support this device?

  I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.

  You are running windows 7 starter edition?

  -to know

  -Right click on computer

  -Select Properties

  -Look for the system type

  Also, what processor do you have?

• Can connect to the IPSec VPN, but can not see the internal network

  I have several users that can connect to our rooms of ussing IPSec VPN on a 5505. I have a user who can connect, but cannot see the internal network. This user is using DSL with a speedstream 4100. However, I have another user with the same configuration that can connect and see the internal network. Newspapers in ASDM show the link, but do not seem to show any errors trying to access internal. Any help will be greatly appreciated. Thank you, Bill.

  Add...

  ISAKMP nat-traversal crypto

• New mac connects to the time capsule but does not see the old backups

  My new MacBook Pro connects perfectly to my Time Capsule, but it is not all backups that are there.  I can't scroll through them as I can with my old MacBook Pro.  The MacBook still connect to Time Capsule well and see and scroll through all the backups it.

  No idea why?

  I wish that my new mac to be able to go back through the backups as does my current MacBook.

  Thanks for any help.

  Since El Capo OS a lot stricter security.

  You will generally not be able to simply use a backup Time old Machine as you did in the past.

  Backups made by different computers must be used via migration assistant... not just opened in TM.

  However, you can always copy a file or folder, you must manually via the Finder... ride the sparsebundle and access... If you have issues copy folder in the form of TM and then paste it in Finder... There are different ways to trick the it.

• I have Acrobat 8 Professional Upgrade and install on the new computer, but can not find the original software.  What should I do?

  I have a new PC and want to install Acrobat on it but cannot find a version upgrade.  I can't find the original software.  Since I already paid for Acrobat, I would like to reinstall on my new PC and upgrade to the latest version.  I don't want the Cloud version and am ok if the latest version of office is not the latest version of cloud.  How can I do this?

  Hello

  Where you purchased this product, if Adobe would then request make you to "adobe.com/getsupport. Connect using the credentials, and then select the option 'always need help contact us' & login to chat.

  The chat expert will help you with tools & look in your account

  Kind regards

  Christian