Can connect to the IPSec VPN, but can not see the internal network

Similar Questions

• Unable to connect to the internal network of SSL VPN

  Setting the time first ASA 5512 and I did a lot of research to solve my problem but no luck. I really appreciate if I can get help.

  After having successfully connected to ASA via SSL VPN. I am only able to ping to the outside interface (10.2.11.4).

  Please check my config and I would like to know what the problem is. Thank you

  : Saved
  :
  ASA 9.1 Version 2
  !
  hostname asa-01
  domain corporate.local
  activate t8tpEme73dn9e0.9 encrypted password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  t8tpEme73dn9e0.9 encrypted passwd
  names of
  sslvpn-ip-pool 10.255.255.1 mask - 255.255.255.0 IP local pool 10.255.255.100
  !
  interface GigabitEthernet0/0
  nameif outside
  security-level 50
  IP 10.2.11.4 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif inside
  security-level 100
  IP 10.2.255.18 255.255.255.248
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 0
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  clock timezone STD - 7
  clock to summer time recurring MDT
  DNS domain-lookup outside
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 10.2.9.23
  10.2.1.1 server name
  Server name 10.2.9.24
  domain corporate.local
  network of Trusted subject
  10.2.0.0 subnet 255.255.0.0
  the object to the outside network
  10.2.11.0 subnet 255.255.255.0
  network ss object
  10.2.11.0 subnet 255.255.255.0
  network of the VPNlocalIP object
  10.255.255.0 subnet 255.255.255.0
  the object of the LAN network
  10.2.9.0 subnet 255.255.255.0
  network of the VPN-INSIDE object
  subnet 10.2.255.16 255.255.255.248
  tcp4433 tcp service object-group
  port-object eq 4433
  standard access list permits 10.2.255.16 SPLIT-TUNNEL 255.255.255.248
  standard access list permits 10.2.11.0 SPLIT-TUNNEL 255.255.255.0
  host of access TUNNEL of SPLIT standard allowed 10.2.9.0 list
  global_access list extended access allowed object VPNlocalIP object LAN ip
  global_access list extended access permitted ip LAN VPNlocalIP object
  pager lines 24
  Enable logging
  asdm of logging of information
  host of logging inside the 10.2.8.8
  Debugging trace record
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 713.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  Static NAT to destination for LAN LAN static VPNlocalIP VPNlocalIP source (indoor, outdoor)
  Access-Group global global_access
  Route outside 0.0.0.0 0.0.0.0 10.2.11.1 1
  Route inside 10.2.0.0 255.255.0.0 10.2.255.17 1
  Route inside 10.255.255.0 255.255.255.0 10.2.255.17 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  CA-Kerberos kerberos protocol AAA-server
  CA-Kerberos (inside) host 10.2.9.24 AAA-server
  Corp.PRI Kerberos realm
  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  http server enable 4431
  http 192.168.1.0 255.255.255.0 management
  http 10.2.0.0 255.255.0.0 outside
  redirect http inside 80
  redirect http outside 80
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = ciscoasa
  Keypairs 4151
  Proxy-loc-transmitter
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint1
  Terminal registration
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint2
  Terminal registration
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint3
  Terminal registration
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint4
  Terminal registration
  name of the object CN = vpn.corp.com
  ASA_PKC_One key pair
  Configure CRL
  trustpool crypto ca policy

  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Telnet timeout 15
  SSH 10.2.0.0 255.255.0.0 inside
  SSH timeout 15
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  outside access management
  management of 192.168.1.2 - dhcpd addresses 192.168.1.10
  enable dhcpd management
  !
  a basic threat threat detection
  host of statistical threat detection
  statistical threat detection port
  Statistical threat detection Protocol
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 10.2.9.23 source outdoors
  SSL cipher aes128-sha1-3des-sha1
  management of SSL trust-point ASDM_TrustPoint4
  SSL-trust outside ASDM_TrustPoint4 point
  SSL-trust ASDM_TrustPoint4 inside point
  WebVPN
  allow outside
  No anyconnect essentials
  AnyConnect image disk0:/anyconnect-win-3.1.04063-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  list of chip-tunnel TerminalServer mstsc.exe Terminal windows platform
  attributes of Group Policy DfltGrpPolicy
  value of server DNS 10.2.9.23
  L2TP ipsec VPN-tunnel-Protocol ikev1
  field default value corp.com
  WebVPN
  value of customization DfltCustomization
  internal group CA-SSLVPN-TEST strategy
  attributes of CA-SSLVPN-TEST-group policy
  WINS server no
  value of server DNS 10.2.9.23
  client ssl-VPN-tunnel-Protocol
  field default value corp.com
  internal group CA-CLIENTLESS-TEST strategy
  attributes of group CA-CLIENTLESS-TEST policy
  clientless ssl VPN tunnel-Protocol
  WebVPN
  value of URL-list of the contractors list
  chip-tunnel enable TerminalServer
  ssluser nS2GfPhvrmh.I/qL encrypted password username
  username ssluser attributes
  Group-VPN-CA-SSLVPN-TEST strategy
  client ssl-VPN-tunnel-Protocol
  group-lock AnySSLVPN-TEST value
  type of remote access service
  username admin privilege 15 encrypted password f4JufzEgsqDt05cH
  cluser 3mAXWbcK2ZdaFXHb encrypted password username
  cluser attributes username
  Group-VPN-CA-CLIENTLESS-TEST strategy
  clientless ssl VPN tunnel-Protocol
  value of locking group OLY-Clientless
  type of remote access service
  attributes global-tunnel-group DefaultRAGroup
  Group-CA LOCAL Kerberos authentication server
  tunnel-group DefaultRAGroup webvpn-attributes
  CA-ClientLess-portal customization
  attributes global-tunnel-group DefaultWEBVPNGroup
  sslvpn-pool ip address pool
  Group-CA LOCAL Kerberos authentication server
  tunnel-group DefaultWEBVPNGroup webvpn-attributes
  CA-ClientLess-portal customization
  remote access to tunnel-group AnySSLVPN-TEST type
  tunnel-group AnySSLVPN-TEST general attributes
  sslvpn-pool ip address pool
  CA-group-Kerberos authentication server
  CA-SSLVPN-TEST of the policy by default-group
  tunnel-group AnySSLVPN-TEST webvpn-attributes
  OLY-portal customization
  Disable Group-alias AnySSLVPN-TEST
  Disable AnySSLVPN-TEST-group-alias aliases
  OLY-SSLVPN disable group-alias
  enable SSLVPN group-alias
  type tunnel-group OLY-Clientless Remote access
  OLY-Clientless General attributes tunnel-group
  CA-group-Kerberos authentication server
  Group Policy - by default-CA-CLIENTLESS-TEST
  OLY-Clientless webvpn-attributes tunnel-group
  CA-ClientLess-portal customization
  try to master timeout NBNS-server 10.2.9.23 2 2
  Group-alias Clientless enable
  Group-aka cl disable

  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  class class by default
  Statistical accounting of user
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group 3 monthly periodic inventory
  Subscribe to alert-group configuration periodic monthly 3
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:ceea6b06a18781a23e6b5dde6b591704
  : end
  ASDM image disk0: / asdm - 713.bin
  don't allow no asdm history

  Hello

  I'm glad to hear it works

  Please do not forget to mark a reply as the right answer or useful answers to rate

  -Jouni

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• Connected to the local network, but can not use internet

  I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

  I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

  When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

  Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

  I use an edimax 802.11n wireless card and a D-link router

  I tried several things to make it work again, but without result. Any help would be greatly appreciated

  disable TCP/IPv6 had no effect.

  I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

  Thanks for the help of yor

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• How can I disconnect from the internet but to maintain my connection to the local network in Windows 7?

  I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?

  Hello

  If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.

  (a) click Start.

  (b) type network and sharing Center in the start search bar and press ENTER.

  (c) in the left pane, click on change adapter settings

  (d) it would be to open a window with the connection to the wired LAN.

  (e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).

  (f) it would disconnect the computer from Windows 7 to connect to the local network.

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK

  I tried to set up a simple customer vpn using this document

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

  VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...

  6.3 (5) PIX version

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the encrypted password of VmHKIhnF4Gs5AWk3

  VmHKIhnF4Gs5AWk3 encrypted passwd

  hostname VOIPLABPIX

  domain voicelab.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside 208.x.x.11 255.255.255.0

  IP address inside 172.10.2.2 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool voicelabpool 172.10.3.100 - 172.10.3.254

  history of PDM activate

  ARP timeout 14400

  NAT (inside) - 0 102 access list

  Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1

  Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 172.0.0.0 255.0.0.0 inside

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac

  Crypto-map dynamic map2 10 set transform-set trmset1

  map map1 10 ipsec-isakmp crypto dynamic map2

  client authentication card crypto LOCAL map1

  map1 outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 encryption aes-256

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address voicelabpool pool cuclab

  vpngroup dns 204.x.x.10 Server cuclab

  vpngroup cuclab by default-field voicelab.com

  vpngroup split tunnel 101 cuclab

  vpngroup idle 1800 cuclab-time

  vpngroup password cuclab *.

  Telnet timeout 5

  SSH 208.x.x.11 255.255.255.255 outside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 172.10.1.2 255.255.255.255 inside

  SSH timeout 60

  Console timeout 0

  username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2

  Terminal width 80

  Cryptochecksum:b03a349e1ac9e6022432523bbb54504b

  : end

  Try to turn on NAT - T

  PIX (config) #isakmp nat-traversal 20

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1

  HTH

• How can I configure windows update in order to start the procedure, when I connect to the school network?

  OT:help configuration of Windows Update.

  I use windows 8, now my problem is that I have to enter a user_name and password each time you start the browser, if you close the browser, or open another browser, you must enter user password again once you use a wifi or lab computers. Now when I connect to wifi, my browser instantly request name username-password but windows update is not so. I tried this a few times, only once named windows update displays dialong box asking username and password and it takes hours to do.

  How can I configure windows update already if start update already when I connect to the school network.

  Wifi authentication which traverse the browser means that you still need to open a browser and a connection that first, before any other programs can access the network.

• Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  In proxy environment, the computer cannot connect to the Adobe servers, so it does not work. The proxy or the firewall should be disabled if you use creative cloud.

  Hope this will help you.

  Kind regards

  Hervé Khare

• MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  Try this restart your iPhone, iPad or iPod touch - Apple Support

  If this does not work, it may be a hardware problem.

  Hope this helps, good luck to you.

• Skype to the Japan number - call is OK but call the receiver can not see my number

  Hi all.

  Today I received number of Skype to the Japan, receiving another appeal is OK but when bringing in another receiver can not see my number. I went to the caller identification settings and cannot see the Japan in the list, while number of Skype to the Japan cannot do that, right?

  Thanks for reading.

  Update: I received Skype confirmatiom. It is correct. Caller ID cannot be used in the Japan.

• How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

  How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

  Hello

  Based on this and that is not a printer ready network. Has a network card?
  Another thing, you need to consider: HP does NOT support Windows 7 (for her) so you have to get this first.

  Good luck.