I don't think that my DHCP 43 option works

Similar Questions

• I don't think that my fan does not work, not very hot at the air inlet, can I increase the speed of the fan?

  Is it possible to increase the speed of the fan, my laptop is not hot enough?

  In other words, it must be controlled by the motherboard. Points to check are all the ventilation grids which allow the air make sure they are free of lint, pet hair, dust, etc. If there are panels that can be removed (as for the HDD or RAM upgrades), delete and wipe any dust, etc, from there. With the panels off, get a can of air spray to Wallyworld, Staples, etc. and blow through the orifices of evacuation to the inside. That should dislodge from the heat sink.
  After a thorough cleaning, the outgoing air should be slightly cooler. Keep in mind that the more stressed the CPU and GPU are, more air is exhausted. If you think there might be a problem, there are a number of utilities that will control the fan speed and the different system temperatures:

  HWMonitor http://www.cpuid.com/hwmonitor.php
  CoreTemp http://www.alcpu.com/CoreTemp/
  Http://www.almico.com/sfdownload.php fan speed (also allows the fan control)

  If you used to use the laptop on your lap, you can think about getting one of the aprons to put on; very often, during its use on the knees, some of the Airways under may be blocked by your pants, causing overheating. I had a Logitech, which has a sliding mouse (I can't stand the touchpad), and it has helped tremendously with my gateway heat problem.

  SC Tom

• I don't think that when I turned on my laptop before asked that the password and now it's

  I don't think that when I turned on my laptop before asked that the password and now it's

  She named me and under my name is my gmail account

  any suggestions on how to get on my computer?

  Original title: I have windows 8 on my laptop

  It will be your password for your computer (not your gmail password).

• I already have the CCS of Dreamweaver.  Can I pay once to update this program?  I really don't think that it would be cost-effective to pay monthly or yearly.  Thank you!

  I already have the CCS of Dreamweaver.  Can I pay once to update this program?  I really don't think that it would be cost-effective to pay monthly or yearly.  Thank you!

  There is no upgrade path.

  If you buy CS6, be informed on what you get (not better).

  • CS6 is 4 years old.
  • CS6 is no longer supported,
  • CS6 will never be updated, ever.
  • It is 5 versions behind the current 2015 CC.
  • It lacks all the latest bells & whistles found in current versions.
  • But to continue to improve operating systems, subsequently CS6 will stop working in those newer.

  For the money you would spend on CS6, you'd be much better join the creative cloud.

  Nancy O.

• Uninstalled CD player XI player. I uninstalled CD player and tried to reinstall the XI player. Almost finished reinstall, but then he asked for a serial number. I don't think that ever there was a serial number for XI player since it's a free download. My

  Uninstalled CD player Standard XI player. I uninstalled CD player and tried to reinstall the drive XI Standard. Almost finished reinstall, but then he asked for a serial number. I don't think that ever there was a serial number for XI Standard reader since it is a free download. My Acrobat account shows no drive XI Standard or a serial number for it. How to return to drive Standard XI?

  The reader is free. There is no such thing as "Acrobat Reader XI". Looks like you have downloaded "Acrobat XI", which is not free...

  To return XI Reader you can download it here (DC says the title, but you can choose to download older versions, in this case version 11): Adobe - Adobe Acrobat Reader DC Distribution

• Warning to users: don't think that spending a printer from region to region will be a piece of cake

  I just thought I would add my 2 cents on the matter of the replacement of the 364 cartridges with 564 cartridges.

  I bought a 309g in Europe.  My family knew that we'd be alone in Europe temporairly so when we reviewed printers we made sure we bought one with a brick that allow the 120V - 240V conversion thinking that we could easily bring it back with us.    The printer works well in Europe and we were very happy with it.   Then we moved to the United States.  I still had ink in my 364 cartridges, while it worked fine.  Then the ink begins to become weak.  I went online and did some research and found that I couldn't buy 364 cartridges in the United States but has seen that printers 309g here used the 564.  I innocently that HP was just followed the sales of products and that thought was why they had different numbers.  I went to put in a 564 when my black ink ran out and the trouble started.  The printer will not accept the cartridge.  So I called HP Support to find out what was going on.  The representative would not help me due to the fact that my printer warranty was out.   Of course, I got the offer to pay for the support but I don't have a good feeling from him that he knew what was going on with the printer, so I refused.

  So I went back to the internet and looked deeper. I discovered that the printers are configured to accept some cartridges in their respective regions.  Now according to this forum, we need a way to change the printer to accept other cartridges of regions.  Armed with this information, I called HP Support, but this time pointed out that I was using the guarantee of $100 in cartridges, I bought and I wanted to change my area of printer.    The support guy put me on hold for a while and finally returns with 'I'm sorry, I can't help you.  I'm not allowed to exercise that function.  I'll pass you on my manager and he will contact within 24-48 hours.  It's 5 days later.

  Given that HP won't keep me from spending $$ on their cartridges, I finally decided to try filling them.  In addition, I have a child to school with missions that need to be printed.   Funny that it was HP, which led me to this action.  BUT what I didn't know is that if a cartridge is exhausted - there is a little or something that is returned in the cartridge and prevents him to work more.  ARG.  Now I am at the point to see if I can 'reset' the cartridge.   But with regard to filling - the other 4 cartridges reloaded very well and thanks to HP for pushing me towards this action, I saw that it is a great (and cheaper) alternative.

  I wished that I studied this subject a little more before letting my exhausted ink.   I hope that others can learn from my mistakes and that if they want to exchange it areas that it runs more flexible for them.   Probably, if I knew it would be this difficult to take a printer from one region to another, I would have just bought a printer cheap in Europe and then trashed it when we moved.

  Bagheerab

  HI Bagheerab,

  If you bought the printer in an area and moved to a new area, you must call customer service to ask a "regionalization Reset." Avoid any accusation to this effect; It is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works. See the document on regionalisation.

  Research and installation of the cartridges after moving to another country

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• I don't think that this just happened

  I have x 200 tablet running windows vista.

  I was typing away in MS word. Suddenly MS Word is not responding. It is for me a normal experience now with vista and programs in general. I was hoping word had created a recovery file and I feared the worst loss of my current document.

  The next thing, I try to log out of windows like MS Word will not die gracefully. Windows crashes now. Again, it is my normal vista experience. Time for the old hard restart. I press and hold the power button. Shutdown!

  Restart the laptop by pressing the power button. "Unexpected stop" windows running audits claims. It happens so often he must really learn to expect that I will be hard-restart if it crashes for more than 5 minutes.

  After checking the unexpected stop, he wants to run the disk check. I'm canceling. It continues to load windows as usual.

  Now, here's where su Vista (bad guy) surprise me once again... He asked the top as if I had never used the system before. Equipped with standard lenovo desktop computer. I had installed programs were available... However, the best bit... all of my files and folders have disappeared.

  Fortunately I have not lost a lot too. A few written documents have been lost forever, but most of the things on my laptop I have copies also.

  Microsoft has soon. Soon Vista.

  I hope that readers appreciate the fact that I did very well to not swear in this post.

  I rebooted again and currently let run the disk check.

  Reloaded, and it brought it all. Awesome!

  Ah ha and MS word had done an auto save (Tip: always set to MS Word auto save every 1 minute), but with some losses.

  What was that all? ... Maybe Vista wanted to teach me the importance of back ups?

  New good guys

  received my replacement today. Taken over a week to settle, but now its done and this new machine is much more stable than the previous. So far not a single crash! I am surprised to find vista may work. Bravo for pointing me in the right direction. It loads faster than ever.

  Ahmad.

• I received the email from microsoft, but I don't think that's the real e-mail, I've pasted below, can you please help me I have marked as spam and deleted. Thank you.

  From: * e-mail address is removed from the privacy *.
  Subject: UPDATE ACCOUNT 2012(LAST WARNING)
  Date: Tuesday, July 24, 2012 12:22:14-0400

  

  Welcome to Hotmail

  The effective way of the email

   

  Dear user,

  This message is to inform you that your account is not active in our database. Because of the unusual connection of unknown places of IP attempt. You are to fill out the form below, such as requested, in order to avoid your account permanently closed within 24 hours after this notice. Our goal is to provide you with the best possible service, especially when it comes to protecting your account.

  Enter the following information:

  User name:
  Password:

  Date of birth:
  Territory / country:

  NOTE: This is the last time that you will receive the notice and the windows! will not be held responsible for any damage that may result from the non update of your account. If you have updated your account, please ignore this message.

  NOTE: Click on answer before you fill out the required information

  YOUR DETAILS WILL NOT BE SHARED.
  We will continue to work on the contribution of Windows Live! the best email service autour and we appreciate your joining us for the ride.

  Sorry for the inconvenience,

  Sincerely,
  The Windows Live Hotmail Team

  • Take your emails on the road. Go mobile
  • Chat with your Messenger friends to your Inbox or to download Messenger

  Windows Live

  Microsoft respects your privacy. Read our online Privacy Statement.

  Microsoft Corporation, One Microsoft Way, Redmond, WA 98052-6399, USA © 2012 Microsoft Corporation. All rights reserved.

  TOTAL SCAM!

  Don't answer. Delete this message.

  Microsoft NEVER send unsolicited emails or phone calls to anyone.

  It's just a secular scamming thing. Don't fall for it.

• USB Raw error:-1073807298 - I don't think that there is an easy solution...

  Hello people,

  I am currently working on the implementation of a temperature regulator using a distributed seller USB driver.  I spent the last three weeks, this troubleshooting error:

  I suffered from seemingly random and intermittent communication problems in communications instrument USB as well. In a particular case, it is with a USB device of NOR. The problem actually proved to be the USB cable to the device. Someone had replaced the original OR with a less robust cable cable. Cable OR original had a Pearl of ferrite at one end to help the noise to remove. The replacement cable is not. Once I changed to cable OR origin, intermittent problems went away. I don't know if this is your problem, but a good cable USB makes all the difference in this application.

  Good luck.

• I don't have her what so ever on my windows xp. What I have to do. I don't think that I have a sound card.

  I deleted a lot of material in my windows xp. I have no sound at all. This is my sound card or do this same computer cary a sound card.

  Only YOU can possibly know if your computer has a sound card.  Open the case and look.  And, by "deleted a bunch of equipment" do you mean that you physically open the computer case and took out things and thrown them?  (Because that is what this particular set of words in English).  A menu of the items that you have deleted?

• I use the automatic update to install vista service pack 1, but I don't think that it installed properly

  Because because it took a few minutes & I now have the same auto install messeage that SP1 is available for update, also when I tried to install the Vista SP2, I get the message that SP1 needs to be installed first

  Why wasn't Vista SP2, a fortiori, installed SP1 years?

• I don't think that it is possible to edit a slideshow and accompanying miniature and legend/labels through in the edition of the browser. Someone else what wants?

  Does anyone besides me see this as a new useful feature? Not sure that's possible...

  You can edit the images of heroes of the slideshow with the photos and captions through browser Edition. Are you facing any problem when editing those?

  Please provide details and screenshots that will help us identify the problem.

  Thank you

  Sanjit

• Don't think that page in the browser

  I did a montage to a pre-existing page and added a link to it in another page. I checked several times that both pages have been uploaded to the server and have seen the page in Dreamweaver. But when I click on the link, the page is empty! No & quot; page is not found & quot; just empty.
  To see what I want to go to http://svunet.org/publications/index.htm#lab_interp
  Go to the bottom of page and click on & quot; Interpretation of laboratory & quot;
  The page is blank for you? An idea of what's going on?
  I tried this in IE and Firefox

  I discovered what the problem was. There was a dog wandering < php > command on the first line, perhaps left by a previous incarnation of the present. If Dreamweaver ignores the browser doesn't work. I deleted this command and it seems fine. Thanks to everyone for their responses.

• I'm self-publishing a book for children and that all profits will go to the non-profit organization I don't think that I will be eligible for a discount. What I have to buy a permit extended for 79.99 for each image?

  I really need help, I can download to use as backgrounds for my learning book!

  [Moved from the lounge general to (what I assume is) the appropriate forum - Mod]

  Since Adobe Stock FAQ Common Questions, Adobe Stock

  Adobe Stock offers licenses allowing licensees to sell derivatives based on an asset?

  Yes. You can purchase a license for most Adobe Stock photos, vectors and illustrations. Extended licenses provide unlimited impressions / print runs and the possibility to create derivative products intended for resale, such as mugs, t-shirts, etc. Extended licenses can be purchased by clicking on the image on the Web Adobe Stock site and selecting the tab extended license. If you already have a license of the image, you can click on your name in the navigation bar Adobe Stock, open the license page history, scroll to find the image you want, and then click license.

• Windows thinks that my DVD drive is a floppy drive

  I've had my computer for almost 3 years now without problems and now my computer decided that my dvd drive is a floppy drive. I have no floppy drive in this computer.

  I am running windows vista ultimate, 32 bit. My dvd player is an Asus - model unknown, bought 3 years ago

  Device Manager can't find the drive, but does not have a floppy drive

  ->, I uninstalled the floppy drive he sees and has attempted to use the scan for hardware, but it cannot find the diskette again. Tried to restore the computer by using the system restore, which did not work. The player turns on and turn when I put a disc in but nothing and does not pop up in my computer (which only shows my hard drive and a non-existent floppy disk)

  After trying to use demon for a drive emulator tools so that I could actually stop using the physical disk that I don't want to wear them first noticed the problem. Daemon tools has been uninstalled from the restore points, I used so I don't think that is the question.

  Any help would be appreciated.

  Thank you

  Bob

  I did what you suggested and none of it worked. Thank you for your help and I have a solution that worked well.

  I turned off the computer, unplug the drive (power and sata of course), computer turned off, shut down, reconnected and when I restarted it again, my drive was normal.