I downloaded a Service Pack for Vista and computer froze

Similar Questions

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Norton says I need to install a service pack for Vista

  original title: service pack for Vista

  Norton said I don't have the last service packfor Vista version 6.  I have installed all updates.  How to do this?

  Hello

  as you have never responded with the needed information here are all the download links for service pack 1 and 2 for the 32 bit and 64 bit versions

  and here is the information from microsoft on vista service pack 2

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  http://support.Microsoft.com/kb/948465

  Here are the download links for vista service pack 1

  This is the link to download standalone vista 32 bit service pack 1

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  This is the link to download standalone vista 64-bit service pack 1

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Here are the download links for vista SP2

  It's download link for vista 32 bit service pack 2 standalone

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  This is the link to download 64-bit vista SP2

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=656c9d4a-55EC-4972-a0d7-b1a6fedf51a7&displaylang=en

  hope the above helps you with your problem of Norton

• Vista Service Pack for vista x 64 KB948465 AND KB982480

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • KB948465 AND KB982480
  • I always click try again, who do not always, so I go to the page of windows to see if they have something to download to fix this problem, and of course Windows never has anything to fix the problem.
  • Just ignore it and continue on and I hope that I don't have a problem. So far, I've had my computer for two years and I've never had a successful installation on different service packs of Windows. I'm not a computer programmer and I think Windows needs to solve the problems. If they can't do a simple solution, how am I supposed to follow all the advice that I see displayed which resulted in not solving the problem?

  maced2x,

  Think that first execute you the update system (or CheckSUR) tool.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Here's a direct link to CheckSUR for Vista x 86 - System Update Readiness Tool for Windows Vista (KB947821) [November 2010] and a direct link for CheckSUR for Vista x 64 - Windows Vista for x 64-based systems (KB947821) [November 2010]

  Save file (. Windows6 0-KB947821-v11-x 86.msu or Windows6 0-KB947821-v11-x 64.msu) do not yet run.

  Once the download is complete to configure the system to boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Make sure that the native Vista firewall is now on by opening the control panel > Windows Firewall.
  The system must be connected to the internet when you run CheckSUR.

  When the system has been rebooted to clean boot state run CheckSUR.
  Wait until it is finished being run and then check the 2 files of newspapers that he created

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  Please copy and paste either of the 2 balls in your response.

  Cancel the clean boot configuration now and restart Windows in normal mode.

  Expert MowGreen Windows IT Pro - consumer safety

• Error code 0 x 644, when you try to download KB951847 Service Pack for Windows XP

  Priority update "Microsoft.NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86", Windows XP (with Office 2003), a failure to install message appears with the error code 0 x 644.

  It didn't the first time on April 23, 2010 and several times since. There are now 41 emergency updates waiting to be installed, apparently blocked by this failure a transfer.

  How do I resolve this situation?

  KB951847 is an option, not the security update. Feel free to hide it.

  ====================

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB951847 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Program by asking the service pack for vista when I have 7!

  I recently bought Final Fantasy XIV, it said its compatible with XP, Vista and 7. I have Windows 7 Ultimate and when I throw the game to the top to install the game it says I have to install Windows XP service pack 2. My windows 7 is up to date and when I try to manually install windows vista ServicePack 2 it says: does not work for windows 7. What should I do to solve the problem?

  Hi Nihageshii,

  See the link below to find out how to install the game and check if it works.

  http://support.na.Square-Enix.com/faqarticle.php?id=902&la=1&kid=56885&ret=faqtop&c=5&SC=0

  If the previous step fails, then you will need to contact seller game for more information.

  http://support.na.Square-Enix.com/contacttop.php?id=902&la=1

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• service pack, for Vista

  Vista sp 1 guard istalling again and again but dose Pack does not work. When you try to install service pack two, he asks for the service pack a prior installation.

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (exact date preference) did you do the clean install of Windows Vista?

  2 How much time the computer was connected to internet or local networks (i.e. other computers) because you did the clean install of Windows Vista?

  3. What is the full name of your application or the installed antivirus security suite (as appropriate) and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?

  4A give Norton or McAfee application EVER been installed since you completed the clean installation of Windows Vista?

  5. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  6. is IE7 or IE8 installed?

  7 is Firefox, Chrome or any other alternative browser installed?

• Service pack for XP (single computer)

  If you know the answer or you don't know anything.

  If you know WTF it's, you know what to do more than any of us.

  CrystalBall © sez..,.

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Note: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  What does mean if my version of Windows is no longer supported? :
  http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• you plan repair xp Pro-fichier asms download of service pack 2 reinstallation disk computer jams _

  Repair Windows xp

  Hello

  ·        What is the exact error you receive and message in what phase?

  ·        What do you mean by computer jams?

  ·        You are able to start to start on the desktop?

  It could be that the files that are present in the disk are damaged. I suggest using another drive and check if you are able to repair. You can use your product key even if you use another disc.

  If you are able to boot to the desktop then, I suggest you follow the steps mentioned below.

   

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  http://support.Microsoft.com/kb/322756

   

  Step 1: Open command prompt, and then type regedit into the registry editor. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} and see if there are keys Upperfilters or LowerFilters. If they do, save the key and delete upper and lower filters components.

  Step 2: Close the registry editor and open Device Manager by typing devmgmt.msc. The CD ROM drive will always have an exclamation point. Right click on the drive (one by one if necessary) and go to delete. Right-click on the name of the computer at the top and go to "Scan for hardware changes". This should list the disks again. You should now be able to see the installation.

  Step 3: Type notepad on the command prompt and press to enter. This will bring up a Notepad window.

  When Notepad opens, click on file and go to open. The open dialog box is displayed. Switch the selection of the type of file to all files. Go to the CD ROM drive through the icon my computer on the left side of the dialog box. When you get the content of the CD-ROM drive, you will find the i386 folder.

  Step 4: Right-click on the folder and go to "copy". Go to the root of drive C by using the icon workstation. Right-click in the window of C and go paste. This should start the copy of the files from the CD ROM drive on drive C.

  Step 5: Wait for the files to be copied. When it is finished, close the dialog box, close Notepad and the command prompt. When the next mistake of copy of file occurs, you can navigate to the i386 on the C drive folder. You will have to do with each copy of file error that occurs.

  This obviously won't work if the disc is damaged. If the client gets errors in copy of file during this process as well, consider that the CD may be damaged in some way.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot install service packs for windows vista

  I realized that my computer has never been able to install the service pack for vista. I bought the computer with vista installed. He was able to install all other updates except for service packs. When I try, I go to windows update and click start installation. It will appear to work for a while and he will say "Installing updates... 1 installation of 1... Office XP service pack 3. The green line will move along the line and then a box pops up saying '

  The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the microsoft office XP Professional disk "and click OK."

  Because I do not have a disk, I click on 'Cancel' and then I get the error 8024002D code.

  Please help me! Thanks :)

  Windows Update error 8024002d

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024002d

  "> http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5e2ac963-3360-4eb2-b663-6ccdaba2428b".

  http://support.Microsoft.com/default.aspx/KB/968279

• Impossible to download the service pack Office

  My Microsoft Word is upward.  When I click on word on my desk, it pops up indicates that it is not a valid Windows image. I can't download the service pack for Office 2007.  When I looked at my history of update, I realized that I never had service pack 2 downloaded successfully either. How can I do?  Suggestions for my nd excellent Word works again?

  Hello

  
  Perform the steps from the link below and see if it helps.

  http://support.Microsoft.com/kb/942101

  Hope this information helps.

• Why am I not able to download any of the service packs for windows vista home edition

  Why am I not able to download any of the service packs for windows vista home edition

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• I can't download the service pack 1 of windows vista.

  Impossible to download service pack 1 for vista

  I can't download the service pack 1 of windows vista.  I didn't bother with it so far because I now have a new router and I download to configure the router.

  Download the SP1 installation file in a folder and then double-click to manually install Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=30

  Note: Service Pack 2 is also available: http://www.microsoft.com/download/en/details.aspx?id=16468

  J W Stuart: http://www.pagestart.com

• Vista Service Pack 2 restarts and wont load my computer!

  I downloaded the Service Pack 2 of Vista on my HP laptop and when he arrived at stage 3 the computer keeps restarting and won't load. He remains at 0% and restarts. Nothing works I even tried to reboot in safe mode! Please someone help!

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Where can I get a link for a copy of windows vista Service Pack 1 support only computer

  I had to reformat my hard drive of the computer.  I am running Windows Vista Home Premium and try to update to Windows 7 Home Premium.  I saved my files for a western digital 500 gig external hard drive that does not load the drivers in Windows Vista and do not see my drive on my computer to transfer my saved files.  All the files that I see in microsoft tell me how to load sp1 but do not include a link to get the update for service pack 1-vista 32

  Windows Vista Service Pack 1 (SP1) - 434.5 MB
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
  Windows6. 0-KB936330-X 86 - wave0.exe

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
  Windows6. 0-KB936330-X 64 - wave0.exe

  Windows Vista Service Pack 1 - language standalone DVD ISO
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
  6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  added-

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791