I downloaded the DNG Converter and nothing happened. Help, please?

Similar Questions

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• I have downloaded the Foxit and tried and still nothing happens. I associated the program also and nothing happens with save, open, or save as.

  I have downloaded the Foxit and tried and still nothing happens.  I associated the program also and nothing happens with save, open, or save as.  I deleted Adobe Reader and have only Foxit - still nothing happens.

  What browser do you use?
  Does it occur only for attachments Hotmail?
  You are able to download files from other sites?

  If you are using Internet Explorer, try to run without Add-ons and check if the problem persists or not.
  To do this, click Start, type Internet Explorer in the start search box and then open Internet Explorer (No Add-ons).

  If the problem disappears, an add-on is causing the problem, check your add-ons and especially disable all those who may be linked to the reading of PDF.

  If the problem persists, try to create a new user account and the test again under this new user account.
  If the problem disappears, see: http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• went to the command and put in findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened

  I had a problem with my laptop. I let a friend use it and she got a virus. The screen is black. She took it to get fixed. When she returned I couldn't open some files. (Always have this problem with some files) my shortcut icons are no longer there. Then I get this message on the Catalyst Control Center does not work. In any case, I did a scan and he told me that I had corrupted in my cbs log files so I tried to do the command findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened. Help!

  Hello

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  It might also be a good idea to updare drivers network - NETWORK card (wired) and WiFi (wireless)
  by checing at the site of the manufacturer of the system/card mother and/or sites of the manufacturer of the real device.
  Methods for manual update of driver at the end of this response.

  --------------------------------------------------------------------------------------
  --------------------------------------------------------------------------------------

  For settings.ini as this article sets out the question may be totally ignored.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets
  for the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -----------------------------------------------------------------------------------------------------------------------------

  These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.

  Close the sidebar for that.

  Something else for the settings.ini - run AutoRuns and look at the entries SideBar Gadget - y at - it
  all pointing to is no longer present as temp files or uninstalled gadgets or not running?
  Those who will reflect the "yellow icons" on the left side and the files/folders will not exist. If so just
  Click on it and delete - Reboot. This may correct the errors that you see.

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  -------------------------------

  Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
  Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
  -RESTART again. See if that helps.

  Rarely, the error causing the problem with the sidebar and not not affect the system in general.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
  the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -------------------------------

  Another method to try with the SideBar works does not is to copy the Settings.ini to another folder and
  and then delete - then start sidebar.

  --------------------------------

  For tcpmon.ini and settings.ini:

  You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  ===================================================
  ===================================================

  Also update your drivers: (WiFi (wireless), NIC (Wired) and others as required)

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The DNG Converter and DNG Profile Editor included in CS4?

  The DNG Converter and DNG Profile Editor included in CS4?

  No, these are separate downloads.

  DNG home page - http://www.adobe.com/products/dng/

  Adobe Labs (for Profile editor) - http://labs.adobe.com/wiki/index.php/DNG_Profiles

• Photoshop tools in bridge do not work with mt PS CC 2015.  I try to use the image processor, and nothing happens.

  Every since switching to the CC I can't get photoshop 'tools' to work, the bridge.  I chose the pictures in the image processor, and nothing happens.  I have to close PS CC and leave the bridge to open my PS CS6 to process images.  How can I get it works in CC?

  I think I knew my problem.  I use the wrong version of the bridge.  I'm sorry to bother you!

• I downloaded the Dng converter, but could not be installed because it was not downloaded from the App Store. How do we install?

  I downloaded the Dng converter 9.0, but it cannot be installed because it was not downloaded from the App Store. I use Yosemite. How can I install the new Dng converter?

  I understood how to do install, simply change the security setting in system preferences.

• Hi guys I need help for Pixel Bender, cansomeone send me a link, I have Photoshop CC and I googled and all I met seems to be corrupted. I also tried Adobe lab and nothing! Help, please!

  Hi guys I need some help getting Pixel Bender, can someone send me a link, I have Photoshop CC and I googled and all I met seems to be corrupted. I also tried Adobe lab and nothing! Help, please!

  Trevor says.

  Adobe Pixel Bender killed several years ago.

  John Nack on Adobe: Pixel Bender abandoned in PS, AE CS6

• Instill the 11 elements (mac) with OSX El Capitan worm. 10.11.4 puts icon on the screen, but then nothing, any help please.

  Instill items 11 (mac) with OSX El Capitan worm. 10.11.4 puts icon on the screen, but then nothing, any help please.

  I thought I would try the version test, but with the same problem, will not work.

  Any help please would be appreciated

  Concerning

  MP

  How to open third-party applications to developers not identified in Mac OS X "Mac tips.

• I put the camera chip in the hard drive and nothing happens?

  I put two camera differand chips in the hard drive to load pictures and nothing happens

  Hello

  Thanks for your posting in the Microsoft community

  How did you put camera chip in the HDD, I think that you have inserted in to memory card reader

  Connect the cable to USB memory card and reformat the card, update your card drivers, and insert the memory card, the computer should then detect and reformat the card again

  Check in Device Manager
  1 right click on my computer.
  2. Select Manage.
  3. in the left pane, click Device Manager.
  Refresh the drivers
  1. right click on the entry with the error indicator, select Uninstall.
  2. on the main menu, click Action, and then Scan for the hardware changes
  
  Check if the drive is detected
  1. double-click on my computer.
  2. find the drive under devices with removable storage card.
  Try other USB ports.
  A yellow exclamation point . in Device Manager means generally that the device does not have enough power. If the player does not receive a sufficient amount of power from the USB port

• What is the problem when I type in a word in the search field and nothing happens?

  I tried to search for items such as .wma or .jpg and nothing happens.

  Hello

   

  ·         You get the error message?

  ·         Were there recent changes made on the computer before the show?

   

  Method 1:

  I suggest you run this tool fixit and check if it helps.

   

  Fix Windows Search when it crashes or shows no results

  http://support.Microsoft.com/mats/windows_search/en-us

   

   

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows feature search does not work properly, you receive script errors in Internet Explorer, or some information are missing after you upgrade to Windows XP or after you have uninstalled Norton SystemWorks 2003 from a Windows XP computer

   

  http://support.Microsoft.com/kb/913503

   

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  322756 how to back up and restore the registry in Windows

• why I can't download the update... nothing happens

  I get the message to be transferred to the new security feature, but it does not work. It is the third or fourth time that I asked this question and did not always receive a response.

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • https://support.Mozilla.com/kb/installing+Firefox+on+Mac

• SANSA FUZE stucks to the first screen and nothing happens

  My sansa fuze aprox 2 years. It was incredible in the first year that someday when I connect it to my pc it stuck to the logon screen but you screen looks like weard colors not correct letters sansa and low resolution. I tried all the instructions but its not responding do not at all. I downloaded the recovery tool, but because of sansa works not at all my pc could not recognize it.  know that I don't know what to do I'm living in Turkey and a friend of mine reminded my sansa in chicago. I bouth an I phone 3G and I am happy with my MP3 in there but I want to give my sansa to my mother to allow him to listen to the music. but as I told you its does not work at all!

  Help me please, or tell me that you're not good enough to produce a good player.

  don't missunderstand me I like sansa memories, they are THE BEST!  but not all companies can produce good mp3 and video players. I can understand if SANDISK is only a producer of memory company!

  Thank you Bob for your time

  Unfortunately still I coulndt see any connection after I hold this button Center of 5 minutes.

  because there was no link I coulndt try the next step. I offered to send my sansa player to the factory. now I'm wating ansver I will donate my reader to the company to help and protect their customers from this issue.

  I think that there is no solution for me here...

• Creative cloud, do not install it on my mac - yosemite - double-click the icon and nothing happens - help!

  !

  Follow the procedure below:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Return'. () Do not miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .

  Then launch Lightroom application and check.