I dropped the cream cheese in my speaker

Similar Questions

• Now when I create a bookmark window is not open and ask me where I want to drop the bookmark. Why?

  When I try to bookmark a website the window which allows to open and ask me where I wanted to drop the bookmark no longer opens. It is now just the bookmark under General bookmarks. How to add to a specific folder of bookmarks?

  You have the extension installed McAfee Site Advisor?
  
  If so, disable it. A recent update to this extension is breaking this part of Firefox bookmarks.

  If this is not the case, this extension, you have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Can not access the site Web of John Lewis, get message server unexpectedly dropped the connection all the time

  Use the iMac with El Capitan 10.11.1 & Safari 9.0.1

  During the last week, I was unable to access the site Web of John Lewis and the message "Safari cannot open page www.johnlewis.com because the server dropped the connection unexpectedly. Sometimes this happens when the server is busy. Wait a few minutes and then try again"I retry but get the same message all the time. Can access all other sites ok.

  I emptied the cache, deleted the cookies and history. Enter the name of the site in its entirety is not helped either.

  Unable to access the Web by John Lewis site with my iPad either.

  Help!

  Try restarting/resetting the router.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Black on opposite corners of picture after having dropped the camera

  I have an EOS 6 d with a 24-105mm lens. I dropped everything so that cross a road in the middle of a two-week vacation and it bounced around a bit but has been virtually blown off. When vacation finished and I looked at all the 2,500 photos on the computer, about 15 of them have been simply like the one below - two dark corners in front of the other. After these 15 photos with dark corners, there is no recurrence in one of the photos. I don't seem to remember take off the lens and put it back on again about a day after I dropped the camera. Someone knows what are the black corners? I have nothing to fear in the long term?

  

  Looks like as the sun visor turned a bit (just a bit of loose).  You probably correctly tightened later.

  These lens hoods petal protrude further on the top and the bottom on the sides because more of the image of the round lens gets thrown on top.  If you fail to turn it completely around until it clicks with the long petals at the top and at the bottom you will see little bit catty corner black shadows, whose petals appear in the image.

  When I opened my 35mm Sigma at Christmas, I jumped the hood on and took some shots. I thought that the lens was defective because it looked like your shot above, but I had actually just not enough tightened the hood all the way to the click.

• Why creates shortcuts for Moving files when drag and drop the folder or file in another folder?

  I am using Windows XP SP3, just before I drag and drop the file into another folder in my windows explore. Suddenly, he is creating shortcuts for moving file. I'm not able to move the file by drag / move the mouse, it is possible that by cutting and Paste(Ctrl+X) using the keyboard. Why?

  Maybe your 'Alt' key is stuck.
  See exchanging the keyboard with another makes all the difference.

  HTH,
  JW

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)

• BlackBerry Smartphones has dropped the "BOLD" BB and I cannot get my cover to stay on... Help?

  I tried to get AT & T to help, but they say to go to Blackberry help. UGH.  I dropped the "BOLD" of BB and nothing on my cover is cracked or the phone but the play button just won't hold the lid in and I don't see why not.  I won't buy a new cover, if not the cover.  Does anyone have advice outside of the tape?

  cellwiz09 advice has worked to get coverage, but after seeing a colleague with the same phone, I put on its cover and it worked.  So I went on Ebay for a new cover, and we're back in business.  Looks like it was the coverage and not in the spring after all.

  

• Drag and drop the game - add your comments

  Hello

  I created drag and drop the game:

  If the player, drag the object to the correct target - snapping to the target, else it returns to the original location.

  My question:

  I want to add sound (such as feedback) when hanging to the right target.

  What should I write in the code?

  Help, please

  Thank you (-):

  (I added the code and the printscreen)

  star.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag);

  function fl_ClickToDrag(event:MouseEvent):void

  {

  star.startDrag ();

  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop);

  function fl_ReleaseToDrop(event:MouseEvent):void

  {

  If (star.hitTestPoint (targetstar.x, targetstar.y))

  {

  Star.x = targetstar.x;

  Star.y = targetstar.y;

  }

  else {}

  Star.x = 692;

  Star.y = 232;

  }

  star.stopDrag ();

  }

  square.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_2);

  function fl_ClickToDrag_2(event:MouseEvent):void

  {

  square.startDrag ();

  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_2);

  function fl_ReleaseToDrop_2(event:MouseEvent):void

  {

  If (square.hitTestPoint (targetsquare.x, targetsquare.y))

  {

  Square.x = targetsquare.x;

  Square.y = targetsquare.y;

  }

  else {}

  Square.x = 122;

  Square.y = 266;

  }

  square.stopDrag ();

  }

  

  create your sound (using the new construction), then apply the play() method to make the sound when your hitTestPoint is real.

• Moving an object with the sound for example someone speaking

  I want to know how to use the sound as a person speaking to animate/move an object, like this (I'm sure they use sound to trigger movements) - Triforce! #2: Civ VI - YouTube

  Thanks to all those who can help you.

  You can do the same thing with the position or another value. you just need to separate the dimensions first and set the y-axis on the audio amplitude slider. you might want to add "-value" so you can easily adjust the position original and for the layer to go down up instead of:

  value - thisComp.layer ("Audio Amplitude") .effect ("channels both") ("slider")

  

• Impossible to drop the user after abruptly stop (Ctrl + C) impdp oracle 12.1.0.1.0.

  Hello Experts-

  Help me please drop the user.

  SQL > select sid from session $ v where username = "POLICY";

  no selected line

  SQL > drop user cascade of POLICY;

  drop the cascade of user POLICY

  *

  ERROR on line 1:

  ORA-00604: an error has occurred at the SQL level 1 recursive

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  Read the error message; the error is not about removing a user, it's dropping of the user OBJECTS, which were used at the time of the fall of attempt.  Import (so an insertion) was interrupted while Oracle has roll back the transaction, which takes time and locks the object.  Once the restore is complete, the locks have been released and the user, as well as all the objects for this user, could be deleted.

  David Fitzjarrell

• First freeze after having attempted to drop the video / audio sequence

  Hey guys, I meet a really strange for some time now - problem its not appearing not not for everyclip or everyaudio but less throughout the same audio / video files so its not a specifiic codec-related I guess - well now it crashes due to a PNG sequence (1920/1080), yesterday because of a WAV so that worked for another file wav so its a little strange.

  What happens:

  I have an open sequence - want to drag / drop additional audio or video content in it, but first change the cursor to an "icon hand grasping with a sign prohibited by his side -" then, he wants to tell me that his does not work why never-

  But the icon does not disappear and I'm not able to click on anything instead of keyboard shortcuts to save my file - so I have to leave the application via Task - Manager

  My solution:

  When I come back I drag and drop the same clip on the "new sign of the sequence to create" which work - and then paste in the sequence where I want.

  Can someone help me? Its really annoying

  Best wishes

  Joey

  If you have I/O points in the sequence, try to remove them.

• codesnippent createjs equivalent of flash as3 drag and drop the code snippet

  AS3 deafult code snippent for drag and drop

  circle.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_3);

  function fl_ClickToDrag_3(event:MouseEvent):void

  {

  circle.startDrag ();

  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_3);

  function fl_ReleaseToDrop_3(event:MouseEvent):void

  {

  circle.stopDrag ();

  }

  I just tried to convert this code createjs. but my code does not

  / * js

  var t1 = this;

  {circle.addEventListener ('mousedown', function (e)}

  {stage.addEventListener ('stagemousemove', function (e)}

  T1.x = stage.mouseX;

  T2.y = stage.mouseY;

  });

  {stage.addEventListener ('stagemouseup', function (e)}

  e.target.removeAllEventListeners ();

  });

  });

  */

  are you trying to drag and drop the circle?  If so,.

  var tl = this;

  tl.circle.addEventListener ("mousedown", downF)

  function downF (e) {}

  stage.addEventListener ('stagemousemove', moveF);

  stage.addEventListener ('stagemouseup', upF);

  };

  function upF (e) {}

  stage.removeAllEventListeners ();

  }

  function moveF (e) {}

  TL. Circle.x = stage.mouseX;

  TL. Circle.y = stage.mouseY;

  }

• Can I still create my site design by dropping the images, the texts and the text boxes or what I have to learn code?

  Can I still create my site design by dropping the images, the texts and the text boxes or what I have to learn code?

  Database coding (HTML & CSS) is necessary to get the most out of DW.   It of not an app drag & drop like Photoshop or Illustrator.

  If coding isn't your strong point, try Adobe Muse.  MU is for designers and non-codeurs enjoy working in a GUI.   You are limited with what you can build with MU.  So don't expect to do advanced stuff or you will not be disappointed.  But for the basis of hobby, charity or vanity sites, MU might be all you need.

  Nancy O.

• Application of segment SS Enqueue and fate on 8.1.7.4 after attempting to drop the temp tablespace

  We have a case opened with the support of the Oracle, but I thought I'd throw it out there if it's ok.

  We have a 8.1.7.4 database running on HP - UX 11.11 PA-Risc and it looks like any session that wants to use a temp space is hung a SS enqueue or in some cases is waiting on a waiting "sort request of the segment.

  Saturday, we tried to move all users to a new temporary tablespace and drop the old one but the drop suspended and we control-C out of it.  We put the users to the original temp.  Note that both the old and the new temporary tablespaces are managed locally.

  Before trying to leave falling the old tablespace temp that we killed the existing sessions, including one who had worked for two weeks and has been hooked on SMON.

  Query v$ fast_start_transactions and x$ ktuxe indicate that SMON is back any large transaction.

  In addition, SMON seems to run this query always:

  SELECT file #, block #, LENGTH

  The UET $

  WHERE the ts # =: 1 AND segfile # =: 2 AND segblock # =: 3 AND ext # =: 4

  Here are the locks held by SMON for what it's worth:

  ADDR KADDR SID TY ID1 ID2 LMODE CTIME BLOCK REQUEST
  ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ----------
  C000000028C43CD8 C000000028C43CF8 74 16 4 0 59610 TT 8 0
  C000000028C43C68 C000000028C43C88 TS 74-666633304 8 6 0 0 59650
  C000000028C1CB38 C000000028C1CB58 8 ST 0 0 6 0 13 0

  ST, space management Transaction
  TS, temporary Segment (also TableSpace)
  TT, temporary Table

  Same database has a recovery scenario about a month or to go back due to some deleted data files.  Also, during the holidays, we had to rebuild a global index huge and increased our tablespace temp to get it, which is why we strive to reduce now create a smaller.  In addition, creating index was still holding in the tablespace existing managed dictionary so we ended up move the index to a managed locally.  Also, UET$ has about 33,000,000 lines and most of the data is in the dictionary managed tablespaces.  Dba_free_space queries typically take 30 minutes to return - that is, we know it is messed up and has been so for a long time.

  Pleasure for us.  If anyone has an idea that would be great.

  -Bobby

  Tablespace name I really used corresponded to ts #= 74 in v$ tablespace.

  We plan to rebuild the other indexes in this space in a new locally managed tablespace and then drop the tablespace existing managed dictionary.  My only question is whether corruption will drop the tablespace to fail.

  Hi Bobby,.

  I'm not sure of your current situation hope now, that's better.

  I couldn't find the time to reply back yesterday. Looking at the huge amounts of temporary segments in your tablespace (74), just made me think if you or Support of Oracle were you made aware of an event DROP_SEGMENTS which is an event of users can invoke to clear temporary segments. It deletes the temporary segments such as the SMON in the background. This event has the advantage of not having the CPU consumed by SMON.

  47400.1 Note : EVENT: DROP_SEGMENTS - forcing cleanup of TEMPORARY segments

  There is also a method to the dictionary (changes) patch (not recommended if not). You can enlist the help of Oracle Support

  The method is to identify the segment (which you already have) and update the segment_type from temporary to 999.

  388619.1 Note: last resort when SMON takes 100% of CPU

  Kind regards

  Suntrupth

• Drag and drop the interactive report

  HY!

  For an interactive report, I would like to implement and drag to order lines.

  It's a request complex abandoned behind the report (joints, ect.)

  I need an element hidden like this

  apex_item.hidden(1, rowid) AS Sort
  

  The problem is, that rowid is not here (ORA-00918: column ambiguously defined).

  Because of this article, I'm sure that the joints in my query are problems

  ORA-00918: column ambiguously defined

  But I need the rowid for the sorting process.

  How to implement Drag and Drop, I learned from here:

  Read the Article - Drag & amp; amp; Drop the rows in a table

  Does anyone know of a workaround?

  Thanks for your help!

  ILB.

  Hello

  You can do also, update for example the primary key.

  In the table of the witch you have the column where you store the sort order?

  Use this table for example name as apex_item.hidden (3, ENDGUELTIGEWARTELISTESORT.rowid)

  Kind regards

  Jari