First freeze after having attempted to drop the video / audio sequence

Similar Questions

• Microsoft Lync 2010: When you add users to the Conference for the first time without having to type anything, the chat window is grayed out.

  Hello

  Microsoft Lync 2010: When you add / invite users to the Conference for the first time without having to type in the chat window, the chat window is grayed out. I am not able to type anything in the chat window to continue the Conference.

  Thank you
  Rajeev G C

  Phone: 9886540640

  Hello Rajiv Iyer,

  There is a forum for questions about Microsoft Lync 2010.
  Click here for a link to repost your questions in forums Microsoft Lync.

  Thank you

  Marilyn

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  Short and accurate: if they don't appear, your system does not support them. Refer to the plug Tech on the product pages and make your choice...

  Mylenium

• I watch a movie, and then after 10 minutes or if the video is empty.

  I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?

  I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?

  Watch a movie about what?

  In other words - you look a the Internet via Netflix movie streaming?  A video streaming via Hulu?  A video that is saved on your hard drive?  A video that is stored on a shared network is accessible on your local network?  What is a DVD?   BluRay?  He plays using SilverLight?  Adobe Flash Player?  QuickTime?  RealPlayer?  Or something more local like WIndows Media Player or VLC?  Something else?

  I would like to say - in general...

  (1) uninstall all of the aforementioned Internet plugins.  Reset.  Download and install the latest versions (Adobe Flash Player, Microsoft SilverLight, Apple QuickTime, or RealPlayer).  Reset.  Try again.

  2) update your video card/device driver from the manufacturers of video cards and devices web page.  (You probably have a nVidia or ATI/AMD video card processor).

  (3) check the settings of your screensaver and Hibernate...

• Premiere Pro CC2015. Clips are transferred to the timeline without the video, audio only.

  Clips are transferred to the timeline without the video, audio only. Add video and audio together are only possible if you first close all sequences and throw the clip on the timeline vacuum . The CC14 wasn't like that. What is the problem and how to fix it?

  Is your Source patch and targeting of the track set correctly?

  

  MtD

• Application of segment SS Enqueue and fate on 8.1.7.4 after attempting to drop the temp tablespace

  We have a case opened with the support of the Oracle, but I thought I'd throw it out there if it's ok.

  We have a 8.1.7.4 database running on HP - UX 11.11 PA-Risc and it looks like any session that wants to use a temp space is hung a SS enqueue or in some cases is waiting on a waiting "sort request of the segment.

  Saturday, we tried to move all users to a new temporary tablespace and drop the old one but the drop suspended and we control-C out of it.  We put the users to the original temp.  Note that both the old and the new temporary tablespaces are managed locally.

  Before trying to leave falling the old tablespace temp that we killed the existing sessions, including one who had worked for two weeks and has been hooked on SMON.

  Query v$ fast_start_transactions and x$ ktuxe indicate that SMON is back any large transaction.

  In addition, SMON seems to run this query always:

  SELECT file #, block #, LENGTH

  The UET $

  WHERE the ts # =: 1 AND segfile # =: 2 AND segblock # =: 3 AND ext # =: 4

  Here are the locks held by SMON for what it's worth:

  ADDR KADDR SID TY ID1 ID2 LMODE CTIME BLOCK REQUEST
  ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ----------
  C000000028C43CD8 C000000028C43CF8 74 16 4 0 59610 TT 8 0
  C000000028C43C68 C000000028C43C88 TS 74-666633304 8 6 0 0 59650
  C000000028C1CB38 C000000028C1CB58 8 ST 0 0 6 0 13 0

  ST, space management Transaction
  TS, temporary Segment (also TableSpace)
  TT, temporary Table

  Same database has a recovery scenario about a month or to go back due to some deleted data files.  Also, during the holidays, we had to rebuild a global index huge and increased our tablespace temp to get it, which is why we strive to reduce now create a smaller.  In addition, creating index was still holding in the tablespace existing managed dictionary so we ended up move the index to a managed locally.  Also, UET$ has about 33,000,000 lines and most of the data is in the dictionary managed tablespaces.  Dba_free_space queries typically take 30 minutes to return - that is, we know it is messed up and has been so for a long time.

  Pleasure for us.  If anyone has an idea that would be great.

  -Bobby

  Tablespace name I really used corresponded to ts #= 74 in v$ tablespace.

  We plan to rebuild the other indexes in this space in a new locally managed tablespace and then drop the tablespace existing managed dictionary.  My only question is whether corruption will drop the tablespace to fail.

  Hi Bobby,.

  I'm not sure of your current situation hope now, that's better.

  I couldn't find the time to reply back yesterday. Looking at the huge amounts of temporary segments in your tablespace (74), just made me think if you or Support of Oracle were you made aware of an event DROP_SEGMENTS which is an event of users can invoke to clear temporary segments. It deletes the temporary segments such as the SMON in the background. This event has the advantage of not having the CPU consumed by SMON.

  47400.1 Note : EVENT: DROP_SEGMENTS - forcing cleanup of TEMPORARY segments

  There is also a method to the dictionary (changes) patch (not recommended if not). You can enlist the help of Oracle Support

  The method is to identify the segment (which you already have) and update the segment_type from temporary to 999.

  388619.1 Note: last resort when SMON takes 100% of CPU

  Kind regards

  Suntrupth

• Can the files removed from Windows Explorer after having been imported in the first?

  Hey everybody,

  Pretty self explanatory question. I know that in something like Windows Movie Maker, you must keep all the videos imported to the same place that you imported in provenance, because they are referenced directly from Explorer. Premiere Pro set to the top in the same way, or it creates a cache somewhere, allowing you to edit the content of the Explorer without disrupting the PP? Thank you!

  First is related to where ever you put the files on your computer, it uses the files without copying so that they stay on the pc.

• Programs first and After Effects is available in the 'previous versions' from 2014 or earilier?

  Help

  Figured it out. They give you options after clicking on install on the 'previous versions' tab.

• More question of the duration of the video/Audio output

  NOTE: (Sync = Sync, however spelt).

  Hello

  I had a problem with almost all Blu - ray discs in yet that I've only just noticed (my friend at work identified for me). If I say a disc with 4 videos of each to 20mins each (just for example), it seems at least video tracks suffer from this problem as listed below:

  The problem:

  The video and audio are out of sync over another, or so it appears on the surface, after looking for a solution to this problem myself or generally to research what was going on, I noticed tracks begin as usual but that I tested it myself (as the worst for bugs ironically) appeared what was going on. The video track, I checked was around 25mins (and x number of seconds) just by browsing the disc but I noticed the stream BD was a time of 32minutes game, clearly 7minutes longer than the original source file, then why is it? Well, after an hour or 2 of re - look at the content, I noticed this video track sometimes looping backwards (just one time) in seconds, so when playing for example, video and audio popular lets say 03:57 play time and then the video will be back jump for example 03:46 while the audio continues to play in what should be normal. Even then seems to keep the entire video so the tracks are not overwrite the original but in addition to the track that extends the length of the video.

  That has not been explained probably well so in short, the video seems to go back a few seconds during playback (when the product) while the audio continues on normally, not only put the tracks out of sync and extend the video length of 25mins to 32.

  Apparently this has been consistent in just about every disc I've done, it is common only in one of the video tracks although some what happened to it most.

  The job well files source before entering again, I usually have them in mp4 because I have always worked with mp4 to work and it is easier for this kind of stuff (for me personally), they have the same parameter coded before entering again and then in again. The source of the videos play fine before never be affected by the recall and have no problem.

  Seems to be something happening on the output Ecore.

  Any idea what could be the cause? Although I doubt it has much to do with the encoding in all encoding settings are by default (if I remember correctly).

  I have practically lost over 30 discs BD on it now without realizing and could be much more if I had not noticed, could really do with help here as im stuck in what could cause video to not only jumpback once track from time to time but create 7mins extra video length making of the thought.

  This could be a problem of variable capture frame rate. First like either variable frame rates. Good luck.

• 300-1120 touchscreen y at - it a way known to produce the video / audio

  I use the 300-1120 as a security monitor for via Webcam XP5 digital security system.  The system works very well.  However, a defect of the touchscreen is lack of output of the video screen via HDMI or SVGA.  Did someone come up with a reasonable work around the issue?

  Yes, the workaround is to buy and to use an adapter USB-to-video, like the EVGA UV + UV39 (HDMI/DVI/VGA) or UV19 (DVI/VGA). There are many other brands on the market, but the EVGA cards seem to work the best.

• Windows media player: burning problems - value to burn the video audio switches as burning starts

  set to burn audio and just before burning starts, it goes to the video.   dv7 - 7270 for laptop of envy.

  Hi Wales23,

  I read your post about not able to burn videos on your HP ENVY dv7 - 7270 ca Notebook and Windows media player from switching to the video. What type of CD that you use? Are the things you're trying to burn copyright protected. You can try using the Cyberlink software provided with your laptop.

  Please let me know.

  Thank you.

• Do not start after having been arrested in the menu "alt + f4" in win7 64 bit for the first time

  I always stop the laptop from the start menu. But now when I stopped it for the first time by the "alt + f4" - menu, it does not restart. Or rather, it starts, but looks like the HARD disc spins down after a second or two, and he did not get past the first screen of boot of Lenovo. I can hit the ESC key to see the detailed (with RAM-tests and other) boot screen, but then nothing happens. I can't go in the BIOS or boot menu. And it does not start on a dvd of Win7. Any ideas?

  Sorry, apparently, that was my (Corsair F-Series 90 GB) SSD that suddenly broke down. I'm back to Corsair.

  Problem solved I guess.

• Firefox unresponsive after restarting my computer after having made changes in the settings of the history and cookies

  I have some changes to cookies and erased my story for today... and then restarted my computer... now that firefox does not open... will not respond... should I uninstall firefox and then reinstall?

  If I uninstall firefox will be reversed the changes I made with cookies and my story?

  If I was to uninstall and reinstall firefox will lose my bookmarks if I do this? or firefox remembers them... so when I reinstall the previous bookmark is too reinstalled?

  Is - this Firefox starts when you open first after the computer restarts, but crashes the next time that you try to start? If Yes, then there is a bug in Firefox 29 where Firefox crashes out when the parameter ' delete history closing Firefox "is selected, so that you get an error" running but not responding do not "next time you ttry to launch. In this case, end the firefox.exe process in Windows Task Manager (or restart the computer) and then reset your Firefox Privacy options and UNCHECK the option «Clear history of Firefox closing» See this article for more details:
  Privacy, historical settings of navigation and-no-track

  If this isn't the problem and Firefox still open even after restarting the computer, then try to boot mode safe of Firefox by holding down the SHIFT key when you start Firefox. If Firefox starts then read Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to narrow down the cause.

• several features left side after having reinstalled XP, including the recognition of Eve and monitor.

  Because of my ignorance, I found myself having to reinstall XP on my home computer. After installation, I found I had more Plug-and-Play capabilities, is no longer a power for the monitor and the hard disk management so they can be disabled at rest, and the monitor is not recognized. I can't add adapters or drivers because the monitor is practically only once from China by GBM periphery Technologies. I can't change the refresh rate, sort of scrolling jumps and sparkles. This all happened at the same time, when I rebooted after reinstalling XP.

  Wow! I downloaded a full bag of drivers of VIA, motherboard manufacturers and all the problems that are dissolved in the blink of an eye. Fortunately, things are back to normal. I appreciate the great help found here. I struggled with this for a week before having the answers here in less than a day. Thank you!