I entered incorrect information during the installation. How to fix it.
During the installation of windows xp pro, I was asked my name, then the name of the computer (don't remember if it was a part of the whole upward to the network or whateer domain). Now there are files under my documents that are appointed;
Administrator (it is fine).
All users (it is fine).
All Users.Windows (where it comes from and how do I get rid of it).
Default user (it is fine).
My name (it is fine).
My name of Name.Computer (again, where it come from and how do I get rid of it)
I install XP on systems of the House several times that I can remember, but I never encountered this problem. I tried to delete the folders and it is said that they are system files and cannot be deleted. I guess I could reinstall windows and go through the hassle of revalidation and explain to MS that it is the same computer, but I would avoid it if I could.
Thank you
Nathan
The directories "Users.Windows" and "Name.Computername" are examples of directories that are created after a corrupted profile. When a new user (for example, "MyName") is created, then you will find a "Myname" folder in "Documents and Settings". If the profile "Myname" is damaged, Windows will create a new profile "MyName.Computername" and start to using them, leaving the old profile. You can get the date in your profile corrupted by using one of the following methods:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >
"How to copy data from a corrupted to a new profile in Windows XP user profile"
<>http://support.Microsoft.com/kb/811151 >
If you have the data recovered from the corrupted profile and you want to delete the damaged profile, and then you must do the following:
Right click on "My Computer"-> properties-> Advanced (Tab)-> "Settings" (in the user profile Section)
Then you should be able to select the profile that you want to get rid of and press 'delete '.
Note that if you have both 'MyName' and 'MyName.Computername' writings, the "myname" is without doubt the deceased profile and "MyName.Computername" is probably the active profile... Make sure that you remove the right pair.
HTH,
JW
Tags: Windows
Similar Questions
-
Error 1935. error during the installation of Assembly--how to fix?
Hello
Recently, I lost my laptop (a Lenovo X201t Win Ultimate running any Bluetooth capabilities (64-bit).) The problem started when Windows Update offered me an option "Bluetooth with Enhanced Data rate software II v6.2.1.3100 (7ZBV19WW)" upgrade. This update of first removed the existing Bluetooth SW and then started to install the new version. Towards the end of the installation (i.e. when the progress bar has reached almost 100%) all of a sudden the next popup appeared:
-----------------------------------------------
Error 1935.An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.ATL, type = 'win32-policy', version = '8.0.50727.42", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture ="amd64"'.See Help and Support for more information. HRESULT: 0X800736FD. assembly interface: returned IAssemblyCacheItem, function: commit, component: {51B6FD4C-6551-1104-A01F-C8B3B9A1E18E}
-----------------------------------------------I googled around fragments of the above error message, but appearently it signals a significant problem. Some discussions I've found comes to the conclusion, that some registry entries do not have the correct permissions, in most of the other discussion gave, had something that was wrong with the subsystem that some libraries .NET and .NET (most listed some "MS Visual C++ 200 x Redistributable" as guilty) were opposed or had been corupted or put in an inconsistent state.
I tried various tips in these discussions, but nothing has worked so far, so I ask here:
- What really does this error mean?
- Can we deduct sort of info in the above message, what to do or where to look for?
- How can I locate or identify the library or component (or other) that is the cause, so that I can try it in- or reinstall first we hope to solve this problem?
I really need my bluetooth capability! I use it regularly to synchronize with my cell phone and listen to music and I can't wait these two functions no longer work!
Michael
PS. : in case this requires some "open heart surgery" on the system: I'm comfortable with all kinds of windows of Mgmt. Tools, edit the registry, etc etc - so no problem! I also took a recent disk image (alas, taken only after the error appeared), so still some changes difficult to solve this problem would be fine with me...
Hello
If you receive a 1935 error when you try to install the software, the Windows file system transaction log is corrupted. The transaction log is used by the Windows file system to recover when a file error occurs. It can also occur if an error occurs with the installation of .net Framework.
Step 1: To correct this install error, you must clear the log.
a. open an administrator command prompt: right click on start > all programs > Accessories > command prompt and select "run as administrator" and click "allow" for the elevation prompt
b. in the command prompt, type the following command:
true fsutil resource setautoreset C:\
c. which assumes that C: is the drive where Windows 7 is installed. If it is installed on another drive as D: Please change the appropriate drive letter.
d. restart the system.
e. install the software and check.
Step 2: Start the Trustedinstaller Service. It is possible that the Trustedinstaller service do not appear in the service list. If you must change the registry value to 'active' in the system registry.
To do this, you must:
a. type "regedit" without the quotation marks in the start search box.
b. in the Registry Editor window, navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > control.
c. in the "Registry Editor" dialog box, double-click on 'RegistrySizeLimit'. This opens the "Edit DWORD value"dialog box.
d. in dialog box "Edit DWORD value", enter ffffffff as the 'hexadecimal " value." Click on the "Decimal" radio button and enter 4294967295 value 'Decimal' . Click OK.
e. restart the computer.
f. log as long as administrator, open an command prompt and type SFC/scannow.
Once the process is complete, reinstall the program that challenges you to install.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
Step 3: Repair of .net framework and check.
Repair the installation of Microsoft .NET Framework
To do this, follow these steps:
a. Click Start, click Control Panel and then click on Add / Remove programs.
b. in the list currently installed programs, click Microsoft .NET Framework and then click Change/Remove.
c. click on repair, and then click Next.
-
How to make windows require a password during the installation of new programs?
How to make windows require a password during the installation of new programs?
Hello
You will not be able to circumvent the password that appears before the execution of actions (installing a new program) in a non administrator account. If you are logged on as administrator, and again, you get the command prompt, you can disable UAC (User Account Control) to stop the password dialog window.
However, as a work around you can right-click on the installation of the program files and select run as administrator. Check if this is useful.
Let me know if I can help you with this question or any problem related to Windows.
-
I just bought Adobe Acrobat 'download only version '. During the installation process, I wonder for my serial No. But nothing in the packing or the card has a serial number? How get/find my serial number?
Hi williamw18489690,
Please see this KB doc to find your serial number: find the serial number of your product Adobe quickly
Let us know if you need additional assistance.
Kind regards
Meenakshi
-
During the installation of Photoshop CC (2015), I get the following error "update failed, corrupted download, try to download again (U43M1D204).» It will not download again, how to download?
Error 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-
Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7
Refer to this:
Download cloud creative to troubleshoot and install questions
Creative cloud (WIP) error codes | Error postal codes of Mylenium
Mylenium
-
during the installation of creative suite its asking me to stop smoking 'safari notifications '. How do I leave it to complete the installation?
Disable automatic updates in Safari or complete the process in activity monitor.
Mylenium
-
During the installation of Flash Player, I get the prompt to close the customer control panel. What is and how it close?
This link to a thread on this forum about Adobe Flash Player explains how to kill (strong word) the customer dashboard:
I assume you are using a Mac.
-
How can I transfer OR-MAX configuration files during the installation of the application?
I install my application on a PC that has no software EITHER. The installation installs LV Run-Time and NO-DAQmx, OR MAX, but MAX configuration is the default value. I use a USB DAQ. I know that I can export the correct MAX configuration file but I don't know where to put it on the PC so that he sees MAX.
Thank you.
If you choose to include the harware config when you create the installation program, then you do not have to worry where it is placed and during the installation process, MAX on the new pc will attempt to import it
If you want to manually copy the configuration on the new pc, put it anywhere you want. You must use the file > import the max function in order to use the new configuration.
-
The bed error message the following OS:
Error 1935. An erroe has occurred during the installation of Assembly jacks. {98CB24AD-52FB-DB5F-AO1F-C8B3B9A1E18E}.
HRESULT: 0 X 80070424The machine is a device of Vista with 64-bit processor.
Hello roninaz2,
Thanks for posting on the Microsoft answers Forum.
They are not on the list of the Windows Vista Compatibility Center. But since I'm not sure what you're trying to sync, I would suggest that you contact Companionlink. They have software for different products and installation guides. Click here for a link to Companionlink support.
Thank you, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Hi all
I need help please. I get 3 errors when you try to install a program and I will include all of the below 3. Please help me get rid of this headache. Thank you.
This is the first...
Internal Error 2908. {837EE547-6D3B-7124-817B-A0DDC38CDA99}
When I select OK I then get this one
Internal Error 2908. {182C2188-3F15-CE6C-1FC2-23A0CB4637D1}
If I hit OK once again I get a different error...
Error 1935. "An error occurred during the installation of assembly ' vdFramedControl, Version ="6.1.60117.0", Culture ="nuetral", PublicKeyToken ="54EAC14E23C9EE53", ProcessorArchitecture = x 86." Please see Help and support for more information. HRESULT: 0X8002802F.
It drives me crazy and I don't know what to do. Thanks in advance for any help that you could provide.
Hi KelMil,
1 Windows operating system you are using?
2. what software are you trying to install?
Method 1:
You can consult the following thread link and try the steps Diana D December 1, 2010 and check if it helps.
Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.
Method 2:
You can also try to give permission for the two above mentioned registry keys. Check for multiple entries, registry keys, and give permission to all keys.
a. click Start, type regedit in the search box and press on ENTER.
b. click on edit and select find and type the copy and paste the registry key: {837EE547-6D3B-7124-817B-A0DDC38CDA99} and click Next.
c. right-click on the key component and select permission.
d. click Add, type everyone and click ok.
e. Select group or the user name one by one and check the complete control of the area for all.
f. click apply, click Ok.
g. check for multiple entries for the key. If one is present, then repeat the steps above to give perimmision to all keys.
Note: You must give permission to the {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} key by following the steps mentioned above.
h. restart the computer and check.
Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
-
During the installation and activation of google chrome, I lost my taskbar
Original title: Google Chrome
during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?
Hi Frank,.
1. do you receive any error messages?
2. have you restarted the computer once installed google chrome?
3. not this problem occurs when you run a specific program or out of order?
This problem can occur for the following reasons:
- Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
- Your user account settings are corrupt.
Method 1: Make sure that the hide option automatically is not selected for the taskbar
To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:
a. press CTRL + ESC.
b. If the Start menu is displayed, click on the Start menu and then click Properties.
c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.
If the problem persists, you can proceed to method 2.
2 method: Recycle Explorer.exe
Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.
Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.
Check whether the taskbar is visible now.
Hope this information helps. Provide more information so that we can help you.
-
Original title: Plustek OpticBook 3600 is not installed
Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.» The required section was not found in the INF"
PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers. Operating system is Windows XP Pro with Service Pack 3. The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot. I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is. Any help would be appreciated!
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device
http://support.Microsoft.com/kb/841567
Note:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
See also:
Error message: cannot install hardware. An error occurred during the Installation of the device
-
Error 1935. An error occurred during the installation of Assembly
Microsoft.VC80.ATL.type = "win32", version = "8.0.50727.5592", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is "amd64"It of a long story, but basically will not install Visual C++ 2005, Visual C++ 2008, neither will the window update or standalone. Many other programs like Acrobat will not be installed. giving me the same error. I tried clearing the log and restart, tried in safe mode, tried searching. A lot of people have this problem, few solutions.I use Vista Home premium x 64 sp2 and a processor intel T5800 (so it's weird that he said processor = amd 64 Architecture)Anyway, any help is appreciated. Looked everywhere, looks like I've tried everything.Hello
This problem may occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.
Method 1: Follow the steps described in the article below
Error message when you try to install an Office program: "Error 1935. An error occurred during the installation of assembly component"
http://support.Microsoft.com/kb/926804Method 2: Also see the article below for measures to address this problem.
Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
http://support.Microsoft.com/kb/970652Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windows -
turn off the power of the computer during the installation of updates
I have this problem that I accidentally unplugged my pc during the installation of an update the welcome menu and now whenever I turn on my pc it freezes on the welcome menu with this same screen installation of updates on. but I see that there is the home menu running hidden behind this frozen screen. After that there this frozen screen 2 min later it automatically restarts this whole process again. I never did any changes to this computer its stock of all.
Please help me to solve this :(
I have this problem that I accidentally unplugged my pc during the installation of an update the welcome menu and now whenever I turn on my pc it freezes on the welcome menu with this same screen installation of updates on. but I see that there is the home menu running hidden behind this frozen screen. After that there this frozen screen 2 min later it automatically restarts this whole process again. I never did any changes to this computer its stock of all.
Please help me to solve this :(
Hey tony1232
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below has the way to download with a vista disk startup repair that you can boot from if you do not have a microsoft dvd vista
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
Walter, the time zone traveller
Maybe you are looking for
-
Built-in dictionary does not not iOS 9.3.4 (with photos)
I just bought my Pro 9.7 "iPad yesterday so that I can use it when classes will resume. I read a scientific paper when I discovered that the "Define" function in iBooks was not working. It is same for Safari, Notes, E-mail and other applications wher
-
Sync stops working for no apparent reason. There is no error message to warn that it does not work. Sometimes the little "roundabout" ciculates constantly. Seemed work changed on 19 September. Have tried to use the Synchronize Now menu option, but no
-
Why can't I install ipv6 (re-) on the XP Home laptop?
3August2012 Years for a reason unknown/trunk I uninstalled ipv6 on one of my laptops XP.I was not able to reinstall ipv6 - or via the command line or GUI.The error message is."Cannot add the required component. "The error is: a section of installatio
-
How to remove ad.yieldmanager pop ups
Vista 32 SP2, I get a pop up that I can't delete: ad.yieldmanager.com. Any advice?
-
Compact Z5 not synchronized with Facebook
My compact Z5 syncs with my Facebook events. It is synchronized with my Google Calendar (I see Google events on my phone) and my Google calendar is synced with my Facebook (I see events Facebook on my Google Calendar) but I do not see events Facebook