I forgot all the signs in addresses

Similar Questions

• Forgotten account iCloud, I forgot all the issues, blocked

  I remember it was 2013 when I recorded my iPhone 4 using the icloud account. I know that I do not use my iCloud there just for my iPhone that I had ATT and I went accidentally reset my iPhone I do not have to open my iPhone again and I need my previous iCloud. Not blocked - just completely useless now. Because since I made the request "find my iPhone on" then it just report it as a stolen iPhone. What a weird one! This is my Iphone. I do not keep my receipt I bought my iPhone in 2013. But I have the last invoice of my payment of this device. Now, I'm too scared to get all my Apple - Mac, iPad and iPhone 6 more to get the same problem. I disabble 'find my IPhone/iPad' I feel so stupid and I'm starting to hate my devices and Apple. Too much protection and me got stuck. Apple makes me lost my iPhone. I can't use it. Weird Apple. I'm not going to buy your products more.

  If you are unable to remember your password, security issues, do not have access to your address of rescue or are unable to reset your password for any reason, your only option is to contact the Support of Apple ID, to speak to an operator you should explain that your problem is related to your Apple ID This way you can be attributed to the assistance, even if you do not have an AppleCare plan.

  You will need to be patient with the process and to be ready to prove without doubt that the account belongs to you. Do not expect access to be restored immediately and if you are not the owner of the Apple ID saved to the device the account will not be reset.

  If you bought the device through your provider they can provide you with a receipt if you bought at Apple, it will be in your purchase history.

• On the opening screen that shows the box in and with the content on the left, all the choices of address as dispatch, trash, archive, I had the choice of opening

  I am 72 and silent... I lost the screen which displays the box of in and allows me to click on one and do it appear below the box together, and then I can either remove or etc... now to answer that I double click and then decide if I like the mail... I also lost a list entirte sort contacts

  Try pressing the F8 key - which lies on the line of the top of your keyboard.

• My HP 6000 609(a) shows all the signs of working correctly but does not print. .

  Just changed the black ink cartridge, but have had no luck.  Does anyone have any suggestions?

  Hi Seth,

  Please contact the Microsoft Community.

  I'd like to have you go to HP's troubleshooting guide. If this does not help, contact HP for assistance.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=18972&prodSeriesId=3866939

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• I did the screen too small (using about: config) and lost the address bar and all the menus. How to restore the display on a screen size can be used?

  I changed the size of display screen using about: config, as stated in the other answers help. After you use a value of 1.0, such as recommended, I've experimented with other sizes, because it seems small. I have entered a large number by chance (a typing error) and made the display so small that only a bug could read. And I lost all the features: bar address, menus, home, Favorites, settings icons.

  I uninstalled and reinstalled Firefox, thinking that this would fix it. But the new facility displays the same way: unreadable and no functionality.

  I found instructions on resetting to the factory settings, but cannot perform this task because I have to be able to access the menus to do so.

  Hello PaulaBob, have you changed the value of layout.css.devPixelsPerPx? -You can perform the following steps to change the still 'blind ': value

  1. Open firefox, and then press ctrl + L (this will focus in the address bar)
  2. type of topic: config
  3. Press ENTER twice
  4. type devpix
  5. Press the tab key
  6. Press enter
  7. type 1.0
  8. Press ENTER again and I hope you should be normal visibility now

• BACK shell. Request a £ sign with the sign #.

  I'm a software developer using an ancient language of 16 bits.

  Compiled executables run from a DOS shell.

  With customer A:

  When I open a DOS shell and typing on my keyboard types of sign £ (pound), as a £ (pound sign)

  When I run my apps in the DOS shell and type on my keyboard types of sign £ (pound) as a £ (pound sign)

  When I run the former editor-in-Chief of microsoft EDIT.exe in the DOS shell and type on my keyboard types of sign £ (pound) as a £ (pound sign)

  "chcp" reveals that the code in the shell of the BACK page is 850

  Windows box settings are 'English (United Kingdom).

  Windows language for non-Unicode programs is set to "English (United Kingdom).

  With client b:

  When I open a DOS shell and typing on my keyboard types of sign £ (pound), as a £ (pound sign)

  When I run my apps in the DOS shell and type on my keyboard types of sign £ (pound) as a # (pound sign)

  When I run the old microsoft publisher EDIT.exe in the DOS shell and type on my keyboard types of sign £ (pound) as a # (pound sign)

  "chcp" reveals that the code in the shell of the BACK page is 850

  Windows box settings are 'English (United Kingdom).

  Windows language for non-Unicode programs is set to "English (United Kingdom).

  So:

  For client A the £ (pound sign) displays correctly.

  For client B, why is the £ (pound sign) correct the prompt back, but NOT within the application BACK (and microsoft EDIT.exe)?

  I have many customers working on several versions of Windows and all the signs of £ (book) work properly, outside this ONE customer.

  I hope someone can help.

  Darryl

  Hello

  You may need to ask the question here:

  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=JScript&filter=AllTypes&sort=relevancedesc&searchTerm=MSDN%20script

  Kind regards

• Web interface works is not the well-known address of management

  TLDR:

  • opening webinterface on ip management group-> does not work / ping
  • opening webinterface on eql management ip-> works
  • opening webinterface on ip management group-> suddenly done work
  • Why?

  Yesterday I've updated SanHQ of 2.2 to 3.0.1 to prepare to run the path to upgrade to FW 7.x. Since yesterday, I get the following warning:

  [ID: 1.6] The eql-grp01 group has been added using non well known address (MWKA). Delete and add the group using the well-known address of management of group 172.16.0.9.

  The eql-grp01 group contains a single EQL (eql01 / 172.16.3.15) and has a dedicated management port. The beach is a 16, as such, both the IP and IP management EQL management group are in the same network (again).

  I'm able to reach the Web interface of eql01 on 172.16.3.15 without problems for years. Try to reach the Web interface on 172.16.0.9 has always given problems (timeout, ping works however) until I asked the Web interface on 172.16.3.15, after that, I can reach the Web interface without problems on 172.16.0.9.

  Up until now I did not worth to look into it, but as I'll be add another Member to the group within a few weeks and SanHQ's "tenacious" on do not use well-known management IP address I have tought I might give it a try here, maybe it's the behavior?

  Edit: Adjusted the subject as non-MWKA does not work but the MWKA (submits sugested otherwise)

  OK, you need remove the SANHQ and add in it through the Well Known management address.

  I don't know why he first had to go to the Member port Mgmt vs being able to use the IP alias for group management.

  That's all the management IP address is, like the IP address of the ISCSI discovery.  It is a superior a physical port IP alias.   So if you can reach the Member IP address, you will have no problem reaching the alias.

  Maybe something on your network, or the ARP table has not been updated.

• When I click on the + sign to open a new tab, all of my most visited sites are empty

  When I click on the sign + to open a new tab all my most visited sites are the blank page. I know that there is a parameter in the config which is set to false, and must change. I don't remember who it is, can you help me?

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Search for the string "browser.newtabpage.enabled" and set the value to 'true '.

  Solved?

• I forgot the e-mail address and the password of the account. I tried to use some possible emails at random but they connect on the account

  On my Xbox One, she put my brightness as a childs account but I want to update a parental account, and for that I need to connect with a parental account that I set up on Xbox 360, but I forgot the e-mail address and the password for the account. I tried to use some possible emails at random, but they don't sign on the account. I tried also to creating new parenting profiles to add the link to my family, but that no longer works. What should I do?

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• I forgot the e-mail address associated with my account eprint

  I forgot the e-mail address associated with my printer so can not connect to my account and change the e-mail address of printers. When I hit the forgotten password acknowledge not all e-mail addresses, I try. I know that my e-mail address of printer and my code intial eprint, can anyone help

  Hi funkybeetroot,

  Since there is no option to request the "forgot user name" on the ePrint login page, I recommend:

  1. remove the Web Services of your printer

  (On most printers, you can use the Remove option Web Services to disable all Web Services. This will remove the printer from your account ePrintCenter, remove all printing applications and data configuration parameters and also clear your printer ePrint email configuration/Configuration / address/account.)

  2. create a new ePrint account using an email of your choice.

  3 re - activate the Web Services and installation ePrint on your printer by following the instructions HERE.

• All I want to know is the e-mail address of my printer. I can't connect to HP.

  I try to print from my ipad, and I need to know the e-mail address of my printer.  I don't know how to find that.  I thought that if I logged on HP I could know, but apparently, my password does not work.  What to do next?

  Hello

  Perhaps it is that you have a SnapFish.com account. A large number of long-term HP customers have SnapFish.com accounts and don't realize it. One of the printer software frees customers signed up automatically, and most people did not know, or forgot, because they never used it. Try to go to SnapFish.com and using the forgotten password screen link it connection. Once you have reset the password, go to ePrintCenter.com and use the SnapFish.com log in information to connect. If this does not help, you may need to contact SnapFish.com directly to delete the account, or use a different email to record with. Another difficulty that I have met is actually recreate a SnapFish.com account, if SnapFish says no accounts exist, or no email comes, when you try to reset your password.

• All of a sudden I lost all my emails and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  I suddenly lost all my emails on my Ipad and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  Have you tried to delete the account and adding it back?

• While putting new contacts in my "address book all the" I now can't go back to my subcategory address books.

  Hello

  I hope someone can help me... I am convinced my problems is a simple click on this type of question. (I hope)

  As he tried to add 4 new contacts in my address book all. I find no more subcategories to my address book
  collection. such as:
  Add address (including each)

      Reno   (only Reno address)
      New York (only New York address)
      etc.
  

  I appreciate your help.
  Cyndi

  All addresses is not a real address book. It is a virtual address, a composite of all the books in your real address book and is provided for research purposes. Simply choose address book personal or any that you have used in the past.

• I want to WRITE to open the list, personal address book, not all e-mail address books. How can I fix this?

  I want the book "Home address" to come when I go to "write". It has been like that. Now I get "All addresses" and need to change to 'personal book. I tried selecting 'Personal', then send me an email. Does not work. Next time I click on write, place the 'Addresses' book returns.

  The new "address book all the ' that you correctly identify occupies the site higher in the list.
  Currently there is no way to set a default value, because there has never been anyone want one so far.
  The developers are working on creating such a preference and it comes out when it's ready.

• Inbox no longer includes all my e-mail address, since the recent update, it seems. Help, please

  I have five or if email address. Before the recent update to Thunderbird they were all included in my Inbox as well as individually. Since the update, a day or two before, the Inbox includes only the first on the list and any other email illuminate their individual addresses. I would like to return to an all-inclusive Inbox for incoming emails.

  I waded in all elements of the toolbar and help online, nothing helps. I can just find a cure.

  Thank you in anticipation

  Unsuccessful

  Reviews | Records | All the is the basic presentation where each account is reported separately. Users who do not like to be split on several issues can use view new messages. Records | Unified to give the effect of a single Inbox all their accounts.

  Would one of these account for what you saw?

  You see your accounts and their records listed on the left? If not, is view | Page layout | The folders pane checked?