I get a page not found error when you try to access the files of creative cloud with a browser?

Similar Questions

• "Gateway router not found" error when you try to connect the TiVO DVR with DLink router.

  Original title: gateway router not found

  try to connect the tivo series 2 to the internet with dlink router that he used to work with previous tivo but not with tivo now, it says gateway router not found
  However, my laptop works fine with the router, I tried tivo support nothing helps, too, if I use the phone line works of tivo, but do not store a lot and is running out of room so it will not work fo rme, helllpppppppp thanks

  Hello

  Where exactly you get this error message?

  See the troubleshooting suggested in "Network error message N07 or C107" steps from this link.

  If you try to connect the tivo series 2 to the internet with dlink router then check out the link below:

  http://support.TiVo.com/app/answers/detail/A_ID/400

  Please contact the manufacturer.

• I get an "information not found" error when you try to install Photoshop CC

  FATAL: Payload "Camera profiles Installer_8.6_AdobeCameraRawProfile8.0All 9.0.0.6 {5CD475F2-DDA0-4173-9FF5-206331209813} ' not found in Media_db information

  When I try to install it again, it starts at 42% installed, then past at 43% and then stops immediately with a message «Impossible Installation - learn more»  Follows the message above.

  Thanks... that did not work, but it lead me to what worked: https://forums.adobe.com/message/4834213#4834213#4834213

• Receive critical error when you try to install the update of creative cloud

  If anyone has experienced this? I can't go through Adobe on phone or chat

  I did a live chat with a technician. It helped me to get rid of the files in the library, and do a clean install of the Creative Suite Installer.

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• Problem when I try to access my files on creative cloud

  Hello

  When I try to access my files on creative cloud, I have the following problem:

  

  Could you help me solve this problem?

  Thank you and best regards,

  Frances W.

  Hi francoisew,

  Can you try to access files on another browser?

  Thank you

  Kapil

• Access denied when you try to access the files on the second hard drive.

  I have a new desktop computer with Windows 8.1 pre-installed on it. I am trying to transfer files from the old disk (Win XP) via a drive Bay and I get an error saying "you not currently have permission to access this folder." I tried right click, go to security and changes in the ownership of the folder, but I can not yet move to the new drive. I have access to one of the folders, but it does not give me access to their subfolders. It also gives me an error when I try to "replace all entries authorization child object with entries permissions inheritable of this object.

  When I googled for a solution the only answer I found is to use the Security tab. If anyone has any ideas I could try, I would be very grateful.

  In fact, I solved it. I have rebuilt the old XP computer and transfer files with a USB key. It was not exactly the solution I was looking for, but it worked.

• Windows Media Player error when you try to read the file: error downloading codec

  Yesterday, I got no sound and video, today I have sound but no video.  What is happening with this?

  I updated my drivers and now the video does not work.  I use Windows Media Player c. 9.00.00.4510.  When I click on read the file, in the black bar at the bottom ready it flashes very fast "error downloading codec".  Before I updated the drivers, I got the video with no sound.  Where this codec disappeared to?   How can I get that back?

  I have updates for the 9 Series Player and I'm happy with it.  If I move up to 10 or 11, codecs and drivers will work with it automatically or will I have the same problem?

  OS: Windows XP sp3

  Thanks for any help, Cdee.

  Hi CDEKV,

  Check to see if the following is useful.

  Method 1: Follow the steps in the below article mentioned to see if it helps.

  How to Download Codecs automatically in Windows Media for Windows XP player

  Method 2: Install the Codec Installation Package to check the issue.

  Download details: Codec Installation Package

  Method 3: Upgrade to the latest version of Media Player.

  Download Windows Media Player - Microsoft Windows

• Unable to save file... "file name" as a file not found error when you try to save in Photoshop CC

  I am trying to create a new action in photoshop cc who takes a picture and replace the color and then saves it in a new file.  Once completed the action will convert the image in 21 files each a different color.  Ideally, I would like to save it as a jpg for each file and then the psd, but I got the error "file... cannot be saved to the file is not found" on the third file in.  I did some research and found that changing the psd to jpg could cause the problem, so I decided to create two different actions to achieve this.  In creating the action steps to create just the multi color of psd files, I got about 6 files in and got the same error.  After doing research a little more I found out that it might be my naming convention, so I've simplified that out of dashes, spaces, etc. and only could get 12 files in the next time, before I got the error.  So, I decided that I would split the colors in two series of different actions, but now I have this error each time even if just trying to apply to a single file and record do not.  Any idea on what's happened and how I can fix this problem?

  One recourse would be difficult to create for a bit as it for actions cannot use logic. It would be difficult for an action in the name of the output file.  However, an Action could use the name of the document as save 21 documents with the same document name in 21 different localities.

  You can also use a Script like image processor or one you can download Image Processor Pro as well as certain actions you create Doe you want. The script can do the thing in naming of file for you.

  You can also create a document with 21 colored layers and save out as a PSD file and the next action step could serves the layer export file script The Action may appoint the color channels as it creates, I'm not sure what the file names will be him are exported. I guess something like Doc Name the name of the layer. I have never use the script, I know right there for use.

  Edit that I just looked at the script it looks like you can not it batch because it has a dialog box and is not a Photoshop plug-in if recorded in batch Action script would be displayed the scripts dialog box and waiting for your interaction.

  

• "IR hardware not detected" error when you try to configure the TV signal in Windows XP Media Center 2005 with Service Pack 3

  I have an HP dv6000t. He came with Yuan EC680 ExpressCard analog TV
  Tuner. When I upgraded to Vista, the IR receiver seemed to be detected,
  but after downgrading to XP MCE 2005. XP MCE 2005 was the ORIGINAL OS
  on the system (bought in November 2006). I've updated the drivers for the TWO
  the tuner card AND who do not HAVE the nVidia GeForce Go 7400 video card
  address this problem. Any suggestion on how to solve this problem would be greatly
  appreciated. What HP had try me, including Sofpaq fixes are not
  address my problem. It does not give the error "IR hardware not detected".
  overnight, it correctly detects the signal from my digital cable box.
  The main problem could partly be the we FINALLY converted to digital television
  signal and I always try to use the analog tuner ExpressCard? Once again
  any help is greatly appreciated.

  I found this fix on another site.  We're supposed to plug the IR cable to the TV box at the back of the first port on the remote sensor Windows Media (the ' antenna' of the Windows Media Center remote control) and then to put the tip of the probe of the IR cable to the cable TV box distance near the sensor on the cable box (it can be seen by a light in the glass) and then complete the configuration of the channels in Windows Media.  The problem is, it does not work unless there is also something connected to Port 2 of the medial distance sensor Windows as well (a head set will do).  With the sensor box IR cable company cable plugged into the first port in the back of the remote Windows Media sensor and headphones plugged into Port 2 of the remote sensor, Windows Media, and the end of the probe of the sensor cable box IR cable near the cable box remote sensor box, Window Media channel setup "found" the cable of the IR sensor and allow me to complete the installation.  I could not bind the Windows Media remote sensor with the remote for the cable box, but said that I managed.  I use the remote cable box to change channels and have box IR cable connected on the decoder cable TV and put the cable box IR receiver cable on top of my desk.

• DNS error when you try to access the link online

  I have been using a link on my site of doctors for centuries to order a prescription (it uses elbowspace) when I tried to order today I received the follwing message' Oops! This link seems broken. DNS error occurred. Server not found "." I contacted the surgery and they tell me that there is no problem. I can access my other sites OK. Any suggestions as to why this has happened?

  Hello

  Are you using a 3rd party firewall or anti-spyware?

  This is most probably the site causes the error, but you can try to reset your TCP/IP stack.

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How is it that we still have the ssl_error_weak_server_cert_key error when you try to access the Linksys routers?

  We had this error pop up in FF 32 and 33 and 34 FF fixed it. How is it that since FF38.1 returned error and even now with 40 FF, the error is still there. Why is no longer an exception option Add to these routers? Even some of the most recent always give this error.

  You probably cannot update the key, but you can complain to Linksys.

• Often, I get a "Page not found" error when I click on the links.

  After the last update of Firefox, I have problems with the links in the emails or websites. When I click on them, often, I get a 404 error and webmasters often say they have tested the links and they work very well. I'm starting to think it's a browser problem, like the frequency of this problem is bigger daily. I'm wrong?... If I'm not, please help me to fix it.

  Thank you

  Monica

  NOTE: I can't automatically add troubleshooting info, because that traverse it cut communication after I click "allow." I did it manually.

  The application databases

  Name: Firefox
  Version: 33.1
  User Agent: Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 GNUTLS/0.8.12
  Windows multiprocessing: 0/1

  Reports of incidents for the last 3 days

  All Crash reports (including 2 pending hangs in the given time interval)

  Extensions

  Name: Adblock Edge
  Version: 2.1.6
  Enabled: true
  ID: {fe272bd1-5f76-4ea4-8501-a05d35d823fc}

  Name: Bitdefender Wallet
  Version: 2.0
  Enabled: true
  ID: [email protected]

  Name: cliget
  Version: 1.2.1
  Enabled: true
  ID: [email protected]

  Name: EverSync - synchronization of bookmarks, save your Favorites.
  Version: 5.0.1
  Enabled: true
  ID: [email protected]

  Name: FireShot
  Version: 0.98.63
  Enabled: true
  ID: {0b457cAA-602d-484a-8fe7-c1d894a011ba}

  Name: IDM CC
  Version: 7.3.88
  Enabled: true
  ID: [email protected]

  Name: LastPass
  Version: 3.1.1
  Enabled: true
  ID: [email protected]

  Name: Personas more
  Version: 1.7.3
  Enabled: true
  ID: [email protected]

  Name: Agent random Spoofer
  Version: 0.9.3.1
  Enabled: true
  ID: jid1-AVgCeF1zoVzMjA@jetpack

  Name: RightToClick
  Version: 2.9.5
  Enabled: true
  ID: {cd617375-6743-4ee8-bac4-fbf10f35729e}

  Name: Save as PDF
  Version: 1.5
  Enabled: true
  ID: [email protected]

  Name: Speed Dial [FVD] - the new tab Page, synchronization...
  Version: 6.6.3
  Enabled: true
  ID: [email protected]

  Name: Definition of that!
  Version: 3.0.2
  Enabled: true
  ID: jid0-k75TfRGfOXPHfEZmJ9cKu5eCgLc@jetpack

  Graphics

  Description of the adapter: NVIDIA GeForce GT 620
  Drivers: nvd3dum nvwgf2um, nvwgf2um
  RAM card: 1024
  ClearType settings: Gamma: Structure of 2200 pixels: ClearType R level: 100 improved contrast: 400
  Device ID: 0x0f01
  Direct2D Enabled: true
  DirectWrite Enabled: true (6.2.9200.16492)
  Driver date: 13/09/2014
  Driver version: 9.18.13.4411
  GPU #2 Active: false
  GPU accelerated Windows: 1/1 Direct3D 11 (OMTC)
  Vendor ID: 0x10de
  WebGL Renderer: Google Inc. - ANGLE (NVIDIA GeForce GT 620 Direct3D9Ex vs_3_0 ps_3_0)
  windowLayerManagerRemote: true
  AzureCanvasBackend: direct2d
  AzureContentBackend: direct2d
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  Important change preferences

  Accessibility.typeaheadfind: true
  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size. Enabled: false
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.frecency_experiment: 3
  Browser.newtab.URL: chrome://fvd.speeddial/content/fvd_about_blank.html
  browser.places.smartBookmarksVersion: 7
  browser.search.useDBForOrder: true
  Browser.sessionstore.restore_on_demand: false
  browser.sessionstore.upgradeBackup.latestBuildID: 20141106120505
  Browser.Startup.homepage_override.buildid: 20141106120505
  Browser.Startup.homepage_override.mstone: 33.1
  browser.tabs.closeWindowWithLastTab: false
  browser.tabs.loadInBackground: false
  browser.urlbar.maxRichResults: 15
  DOM.max_script_run_time: 0
  dom.mozApps.used: true
  extensions.lastAppVersion: 33.1
  font.internaluseonly.Changed: true
  make. Name.Serif.x - West: Georgia
  make. Size.variable.x - West: 14
  General.UserAgent.override: Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 GNUTLS/0.8.12
  General.UserAgent.Vendor:
  General.UserAgent.vendorsub:
  GFX. Direct3D.last_used_feature_level_idx: 0
  Media.GMP - gmpopenh264.lastUpdate: 1413335128
  Media.GMP - gmpopenh264.version: 1.1
  Media.GMP - manager .lastCheck: 1416933906
  network.cookie.prefsMigrated: true
  places.database.lastMaintenance: 1416935696
  places. History.expiration.transient_current_max_pages: 53650
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  Print.printer_Canon_Inkjet_MP240_series.print_bgcolor: false
  Print.printer_Canon_Inkjet_MP240_series.print_bgimages: false
  Print.printer_Canon_Inkjet_MP240_series.print_colorspace:
  Print.printer_Canon_Inkjet_MP240_series.print_command:
  Print.printer_Canon_Inkjet_MP240_series.print_downloadfonts: false
  Print.printer_Canon_Inkjet_MP240_series.print_duplex: 1515870810
  Print.printer_Canon_Inkjet_MP240_series.print_edge_bottom: 0
  Print.printer_Canon_Inkjet_MP240_series.print_edge_left: 0
  Print.printer_Canon_Inkjet_MP240_series.print_edge_right: 0
  Print.printer_Canon_Inkjet_MP240_series.print_edge_top: 0
  Print.printer_Canon_Inkjet_MP240_series.print_evenpages: true
  Print.printer_Canon_Inkjet_MP240_series.print_footercenter:
  Print.printer_Canon_Inkjet_MP240_series.print_footerleft: & PT
  Print.printer_Canon_Inkjet_MP240_series.print_footerright: & D
  Print.printer_Canon_Inkjet_MP240_series.print_headercenter:
  Print.printer_Canon_Inkjet_MP240_series.print_headerleft: & T
  Print.printer_Canon_Inkjet_MP240_series.print_headerright: & U
  Print.printer_Canon_Inkjet_MP240_series.print_in_color: true
  Print.printer_Canon_Inkjet_MP240_series.print_margin_bottom: 0.5
  Print.printer_Canon_Inkjet_MP240_series.print_margin_left: 0.5
  Print.printer_Canon_Inkjet_MP240_series.print_margin_right: 0.5
  Print.printer_Canon_Inkjet_MP240_series.print_margin_top: 0.5
  Print.printer_Canon_Inkjet_MP240_series.print_oddpages: true
  Print.printer_Canon_Inkjet_MP240_series.print_orientation: 0
  Print.printer_Canon_Inkjet_MP240_series.print_page_delay: 50
  Print.printer_Canon_Inkjet_MP240_series.print_paper_data: 1
  Print.printer_Canon_Inkjet_MP240_series.print_paper_height: 11 h 00
  Print.printer_Canon_Inkjet_MP240_series.print_paper_name:
  Print.printer_Canon_Inkjet_MP240_series.print_paper_size_type: 0
  Print.printer_Canon_Inkjet_MP240_series.print_paper_size_unit: 0
  Print.printer_Canon_Inkjet_MP240_series.print_paper_width: 8.50
  Print.printer_Canon_Inkjet_MP240_series.print_plex_name:
  Print.printer_Canon_Inkjet_MP240_series.print_resolution: 1515870810
  Print.printer_Canon_Inkjet_MP240_series.print_resolution_name:
  Print.printer_Canon_Inkjet_MP240_series.print_reversed: false
  Print.printer_Canon_Inkjet_MP240_series.print_scaling: 1.00
  Print.printer_Canon_Inkjet_MP240_series.print_shrink_to_fit: true
  Print.printer_Canon_Inkjet_MP240_series.print_to_file: false
  Print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_bottom: 0
  Print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_left: 0
  Print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_right: 0
  Print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_top: 0
  privacy.clearOnShutdown.cookies: false
  privacy.clearOnShutdown.formdata: false
  privacy.clearOnShutdown.sessions: false
  Privacy.CPD.FormData: false
  privacy.cpd.offlineApps: true
  Privacy.CPD.sessions: false
  Privacy.donottrackheader.Enabled: true
  privacy.sanitize.migrateFx3Prefs: true
  privacy.sanitize.timeSpan: 0
  Storage.vacuum.Last.index: 1
  Storage.vacuum.Last.places.sqlite: 1415991586

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.7
  Version: 4.10.7

  NSS
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSSMIME
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSSSL
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSUTIL
  The expected minimum version: 3.17.2
  Version: 3.17.2

  Experimental features

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• No library not found error when you try to download Stopzilla.

  I can't use Stopzilla, then they sent me an email with a link in it.  I clicked on the link and downloaded.  I clicked to open the download and it gave me an error found no library.  STOPzilla said to contact microsoft, because it is their product.  This is from the download and the link is msicuu2:

  http://download.stopzilla.com/Binaries/third_party/cuu2/msicuu2.exe

  Uh, the first thing I tried to verify as system requirements...  They don't seem to have everything on the web page.  You may contact suppot and this information, because it would be the first thing you would check for troubleshooting...

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• HP envy 5532: message key not valid error when you try to download the software

  I can't download my desire 5532 keep getting error message (key not valid for use in specified state).

  This problem is related to Microsoft Update KB2918614

  The solution is to remove this update.

  How to remove an update for Windows Vista

  If the fix works, I recommend that you 'hide' it so that it not be reinstalled automatically.

  Instructions below:

  If you don't want Windows to install an update, you need to hide.

  1. Open Windows Update by clicking on the button start . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click Find updates.

  3. When Windows finds updates for your computer, do one of the following:

     • Click the link that tells you important updates are available if you have some updates to hide.

     • Click the link that tells you optional updates are available if you have optional updates to hide.

  4. Do right click the update you want to install, and then click Hide update. The next time you check the updates, the update will not be automatically selected or installed. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.