I get an error 0x6D9 code when I try to start the Windows Firewall.
Original title: the firewall of Windows 7 sp1
Hi, I have Windows 7 sp1, and I ran Norton 360 for a year (don't know if that accounts for nothing). Now when I try and turn on the firewall of Windows I get error Code 0x6D9. I went through the solutions posted some time ago, but whenever I try to turn on the firewall, it says use firewalls to update the recommended settings, but it won't do anything. Can anyone help because people seem to say that the Windows Firewall is better than a free.
Hi Jim,.
Thank you for keeping us posted.
I would have you look at the responses of the wire-
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
Back to us for any issues related to Windows in the future. We will be happy to help you.
Tags: Windows
Similar Questions
-
I get an error of 0x8007042c when I try to start the Windows Firewall.
Original title: Windows Firewall error
I'm having a problem with my Windows Firewall, I just noticed it is turned off and when I try it activate or disable all it shows me it's to use the recommended settings so I try this but it says firewall Windows cannot change some of your settings so 0x8007042c error code so I try to start it myself by going to type of starting services is already automatic, so I try to click on start , but it says that Windows does not start the Windows Firewall on Local computer service
Error 1068: The dependency service or group could start. Any ideas?Error 1068: The dependency service or group could start. Any ideas?
Find out what that dependencies and check them (all)?
-
I get an error code 5 when I try to start the Windows Firewall.
Original title: Windows 7 firewall
I can't start Windows Firewall, I am on Windows 7. I have read and followed all kinds on this Forum lately. Nothing seems to work. Own for malware, spyware and viruses.
This is driving me NUTZ, my mistake in Services tries to start the firewall, "Windows cannot start the windows firewall on the Local computer, for more information, review system event log, if it is a Service of Microsoft no, the Service provider contract. And refer to the 5 service-specific error code.
What Else can I do? All I want to be able to do is share my printer between my two PC again. Help!
I solved this problem. I now have a new One.
-
I get an error 0x6D9 code when I try to turn on the Windows Firewall.
Original title: snap-in failed to load with error 0x6D9 to windows firewall code 7
Hello. I have a problem 2 days now.i trying to open my firewall windows 7 but nothing happen is .i then tries to open the Advanced Security windows firewall but I get an error that the ' snap-in could not load with error code 0x6D9 .i'm looking for a solution for hours, I try has several tips but I get no results. I also did a full scan with security essentials, super antispyware, malware bytes, Eset on scanner online, TDSS rootkit removing tool but the computer seems to be clean. Can someone help me? Thank you
Hi Peter,.
Please contact the Microsoft Community.
I'd check the "answers" of the wire-
Back to us for any issues related to Windows in the future.
-
I get the error code 5 when I try to start the Windows Firewall
Original title: Windows 7 x 64 firewall won't start, tried everything
Hi, ive tried enough what was described in the first 10 pages google search, but I cannot get rid of the known problem of firewalls
For me, this is the error code 5.
As soon as I try to start it manually, it says cannot be started.... error code 5.
I did a system win7 files repair, I did a reset of network, I tried about 30 different commands to display information about the firewall service, ive checked the firewall authority loading driver, I gave permission to complete firewall of all registry directories described, ive created entirely new firewall rules 1:1 to the default ones, ive checked other 'ordinary' process runs in the firewall service and and and.NOTHING helped me.
Others facing this problem actually get another error for the first code after a few solutions, they also face the "error code 5.
Oh yes, I also tried the microsoft firewall tool.
He says theres a problem with the firewall, but can not solve.I never had no infection or OneCare / 3rd Personal Firewall running.
And because I can't deal with that firewall, I also can not use transferred ports - which is terrible bad since im was the owner of a local game server.
But that happened in ive faced the problem as it was half a year ago. And I can't be solved without format my drive.Because you guys are part of Microsoft personnel - and has got the possibility to contact the developers - why cant you just create a firewall package with latest updates that crushes real files/settings in order to solve problems that are found by your own tool?
Its a shame, I hope that you can offer me new solution :(
-You are using a third-party firewall software?
At no time.Was there the recent changes on your computer before the show?
No, not at the time the problem occurred, also not 1-2 weeks before.Method 1:
Returns the error Code 5, as I indicated in my problemMethod 2:
Tried 2 - 3 times yesterday, , everything including the Microsoft Tool to automatically fix problems.
I've done a complete check-up and recover system, no modified files files have been found.Also, the batch file to start/restar services:
SC config start = auto MpsSvc - success
SC config start = auto KeyIso - success
BFE sc config = auto start - success
SC config start = auto FwcAgent - fail ' [SC] OpenService error 1060 - service is not installed.net stop MpsSvc - Service not started
net start MpsSvc - cannot be started - error Code 5the rest - success, but still, the firewall service does not.
Seems that the firewall service or part of it gots uninstalled something?
Perhaps in the case of update?Also I can't find no "FwcAgent" file in my system drive while showing the system hidden files and folders.
I guess that's NORMAL given that verification of files windows did not find any changes.
Theres no light at the end? Really?Moreover, the hotline also could not help (and you get his terrible btw, managed a total noob). The suggestions here are much "deeper", still nothing worked again.
--------------------------------------------->
EDIT:
Looking around the means how to re - install the firewall component windows I found another unofficial repair tool.It fits quite all associated in any way with the security settings and firewall components, as it recreates all the rules and rights of dirs and registry keys.
And what should I write - it WORKED.
Let me share with you: http://www.tweaking.com/index.php?/content/page/repair_windows_firewall.htmlAND YES:
Someone should stick this tool in front of microsoft developers, but the hard way.
How is it, some hobby programmers can create these simple tools that beat anything from microsoft developers?I hope that my solution works for the many thousand other ppl that I found on the net - who could not solve their problem (even) with the firewall in vista/windows7.
Please mark this topic as "BOLD" and possible GREEN :-)
Thanks again for your help, John Rubdy! -
I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?
When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall. Panel\Windows Firewall control page should have shown a message say. If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.
I really think you should try a restore for some time point before you tried modifications, if that is even possible.
If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.
If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting. Your system is in an unknown state as a result of these changes.
You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.
You may need to use the installation DVD to do a repair installation. I hope get you lucky, but you may need to do a complete reinstall of Windows.
-
Original title: WINDOWS firewall
I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?
IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.
Documentation AVG Internet Security 2013 States:
Recommendation:
Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.
You can read the AVG documentation by clicking on this link, and see section 6.5:http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems. Choose one or the other, but not both.I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.
-
I get the "Year Error Occurred" message when you try to start the YouTube app on my new Bravia
Hello
My KDL50W800C has an internet connection but when I try to start the YouTube app, I get the message 'year Error Occurred. " Not to be confused with a network error has occurred. It says no network.
Help is greatly appreciated.
Can't tell from your model number, but if it is an Android TV, try to erase the data on the app:
Home > settings > Apps > system apps. Search YouTube from the list, select it, select erase data and confirm.
Restart (just to clear any other issue) - now power press Remote button and try again the YouTube app.
-
original title: Error Code 0 x 80070424 on the Windows Firewall settings
I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"
Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?
Hello
Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)
This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)
Download the two files from the registry
http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg
The base filtering engine
http://download.bleepingcomputer.com/win-services/7/BFE.reg
Run them and click YES when you receive a UAC prompt
Restart your PC
Press Windows key + R and type
regedit , and then click ok
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE
Right click on it -permissions
Click ADD and type
Everyone, and then click ok
Now click on all
Below, you have the permission for users
Select full control, and then click ok
Press Windows key + R and type
services.msc , and then click ok
Start the service database and then filtering engine service windows firewall
If you still get this error
Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.
Download and launch this key
Click YES when you receive a UAC prompt
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess
Right-click on -permissions
Click Add and type
Select full control and everyone
You should be able to start right now the firewall
You can also Miss defender of windows security center, BITS and windows update services
Download
Security Center service
http://download.bleepingcomputer.com/win-services/7/wscsvc.reg
Windows Defender
http://download.bleepingcomputer.com/win-services/7/WinDefend.reg
BITS
http://download.bleepingcomputer.com/win-services/7/bits.reg
Windows Update
http://download.bleepingcomputer.com/win-services/7/wuauserv.reg
Run them and click YES when you receive a quick restart, UAC the PC
Good luck
* Edit *.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk... -
I get this error 8007006E Code when I try to install Windows updates
Original title: 8007006E error Code
I get this error when I try to install the updates that my computer is telling me to install. Error Code 8007006E please help. I think this is the beginning of a domino effect more major problems.
Hello
Follow these methods and check if that helps:
Method 1:
I suggest to disable the antivirus and then try to install the updates and check. Also, make sure that you enable the antivirus once the problem is resolved.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to temporarily disable
Method 2:
You can try to reset the Windows Update components and then try to install the updates and check what is happening.
How to reset the Windows Update components?
http://support.Microsoft.com/default.aspx/KB/971058
Method 3:
See also section provide below and check if it helps:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Hope that information was useful
-
I get an error COOD11B1 code when you try to play a video clip. __
I get a COOD11B error code when I try to play a video clip.
Hi Pat dubois,
1. what type of video file that you are trying to play?
If you receive error C00D11B1 code,
Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer
Follow the instructions in the article given below, because it can help you solve the problem
Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1
Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.
Also take ownership of the files you are trying to play by right clicking on the file and taking possession.
B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.
Codecs, frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsNOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error 80072EFE Code when you try to do a Windows Update
I get an error code 80072EFE "Windows Update has encountered an unknown error" when trying to install windows updates. I always thought that it makes them automatically, but my laptop says latest updates have been installed on 12/28/2010. I now seem to have problems when I connect to my hotmail (I don't know if they are related) and my page Explorer keeps stopping. I tried a few suggestions I have seen in these forums but that you have not had success. Can anyone help please?
May give it a try because it will not harm you in any way.
If you find the answer to your problem, please let us know! I hope someone else can benefit from your solution.
UTC/GMT is 13:13 on Saturday, January 21, 2012
-
I'm unable to install the update for Windows Vista for x 64-based systems (KB972145). Whenever I try, I get the error code 80070570.
0 X 80070570 - ERROR_FILE_CORRUPT
The file or directory is corrupted and unreadable.Perhaps it is the update itself that is corrupted, try to manually download and install the same:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=enIf this does not work maybe reset - WU
http://support.Microsoft.com/kb/971058/en-us
How to reset the Windows Update components?Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
error 80072efe code when you try to install the update for framework microsoft net 4
IT ALSO SAYS UNKNOWN ERROR.
Hello
This rootkit has been known to cause this problem.
TDsskiller (Rootkit removal tool)
http://support.Kaspersky.com/viruses/solutions?QID=208280684Then, restart and check the updates.
To search for other malware use this scanner:
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx==================================================================
If necessary: Run 1 SFC
Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228------------------------------------------------------
Then check out this article:
Update to install updates<-- check this="">-- check>
http://support.Microsoft.com/kb/836941Do these two and try updates
Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
Server 2008 R2 Release Candidate for Windows 7 Release Candidate
http://support.Microsoft.com/kb/947821/How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058=============================================
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
-
Error 5 when you try to start the Windows Installer service
THIS PROBLEM IS RESOLVED (PLEASE READ):
There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).Here's what I did to fix (this applies to all versions on Windows):
(1) right click on C:\ (or E:\ whatever one holds your stuff)
2) go to properties
(3) under Security, click SYSTEM
(4) ensure that the SYSTEM has all the permissions on ALL
NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over
And I'll put the first response as response so that when people search he said answered
=========================================================
My windows installer does not work so I went to go and start it I just got "error 5 access denied". Then I went to start another service to see if it was my computer or if it was just Windows Installer and it worked. I tried to go here (http://support.microsoft.com/kb/943996) and everything he does, but he did nothing. I tried to run hard but he gave me "80072F8F" error code and I didn't spend time fixing something that might fix something.
I tried to go to regedit.exe and did all what is written on http://support.microsoft.com/kb/943996, but nothing worked!Help, please!I run Windows7 64-bit Home Premium editionTroubleshoot Windows install
2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer
http://support.Microsoft.com/kb/2438651
Substitute:
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
1. in the menu 'Start', click on ' execute:.»
2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
3. in the menu 'Start', click 'run '.
4. in the "Open" box, type "msiexec/regserver", and then press ENTER.
If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.
For more information, visit the below mentioned link:
http://support.Microsoft.com/kb/290301
------------------------
Click Start Orb, in the box, type search: Regedit.
Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver
Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Maybe you are looking for
-
How to change the resolution of the photo
resolution of title: original photo I recently installed a new hard disc and reloaded vista... my photos appeared "crushed"... it is set for high resolution...?
-
Need Windows 7 64 drivers for ENVY 15-j143na
Hello just do a fresh install of Windows 7 64 Pro, need a list of good drivers (tried the product page but some drivers seem to be incorrect, and will not be installed). Thank you Michel
-
UNKNOWN RADIO STATION HAS ACCESS TO MY COMPUTER
FOREIGN RADIO STATION (BBC, MAYBE IT LOOKS) SUDDENLY STARTED PLAYING THROUGH MY SPEAKERS EVEN IF MEDIA PLAYER NOT TO USE, BUT WHEN THE MEDIA PLAYER IS IN USE, THE MUSIC AND NEWS RADIO STATION PLAY AT THE SAME TIME. I CAN'T STOP, EXCEPT BY DISABLING
-
Eclipse always app starts automatically
I take another shot to go to Eclipse 3.5. Seems to be working for most of the time, but when I run my application on the simulator it always starts automatically. I tried enabling / disabling the Application-> auto-run at startup, but it still happ
-
Router IOS Cisco Anyconnect ASA configuration
Hello Could someone give me some advice if I can use a Cisco 1812 to connect to a Cisco ASA5512X using Anyconnect. The question we have is that some remote offices may be given fixed IP addresses... Thank you.