Eclipse always app starts automatically

Similar Questions

• App to start automatically at startup?

  I do an app in os 5.0 and I'm getting a strange behavior with my app "already started" in the background when I run the Simulator. The app is not set to auto-start at startup.

  I put a breakpoint in my my UiApplication main() method to confirm this. Does anyone have this seen before or know an explanation?

  Too bad... I found the reason. It is a strange type of default Simulator for the plugin 5.0 OS installation.

  http://rim.lithium.com/T5/Java-development/Eclipse-always-auto-starts-app/m-p/484774#M97729

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

• If the start of processor to consume more energy (I mean 80% or 90%) is also the pleasure of the processor starts automatically on more speed or it always run on the same speedd

  Hello

  If the processor starts to get warmer or runs faster (I mean if he starts using 80 or 90% of its power) the processor fan also starts automatically run faster or the pleasure of the CPU always runs on the same speed.

  Thank you

  Johan

  Hi Johan,.

  It is correct.  The fan works more quickly to cool a processor that is widely used.

• How are apps started/stopped the shell?

  Howdy, I'm running a readynas 314 with the latest OS 6.5.1 and I wondered how the apps that I've installed are started and stopped through the command line (shell). They are all systemctl 'under the hood '? How are apps launched automatically at startup?

  It is beneficial for the RN314. At this stage, we would expect to be available on the server of update week.

• Screen saver does not start automatically

  original title; SCREEN SAVER DOES NOT START AUTOMATICALLY

  My screensaver stopped automatically to come if I use an excerpt it's turns on and will remain lit.  How can I fix or can uninstall and reinstall?

  It becomes a problem growing with the screen savers. The issue is background programs and services that are enough tasks that the computer never thinks that it becomes "inactive". Programs cannot do any real work, but are cycling through their operations individual enough to keep the computer "awake".

  Try to start your computer with a "clean boot", (see Microsoft Support articles below). If this resolves the issue and you definitely want your screen saver, you'll have to discern what substantive programs and services that you can live without being active all the time, and turn them off.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs interfere with your game or program
  http://support.Microsoft.com/kb/331796

  For what it's worth, the systems that I watched recently with this problem were 'smart phone' synchronization software recently installed and who is constantly looking for something to synchronize with regardles to know if they are connected to what whether or not. Change the start of these programs and services 'on demand' to 'always' solves the problem in these cases.

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• Windows 7 firewall service does not start automatically and cannot be started manually

  Update Vista Home Premium SP1, removed the Comodo, removed AVG Free 8.5, put upgraded to Windows 7 Home.

  Attempted to set security. Firewall is "red". Could not be defined. Snap-in did not work (0x6D8).
  Have rubbed the registry for References all Symantec and Comodo and the computer restarted.

  Firewall service is set to start "automatic."
  Log tab is set to "This account" with a password - I have no idea from this password (and don't know what it is).  Seems that log on should be "Local System account" with Desktop interaction

  Falied given departure following the event log:
  Log name: System
  Source: Service Control Manager
  Date: 2009-11-06 12:19:25
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: VISTALAP
  Description:
  The Windows Firewall service is stopped with the special service error access is denied...
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7024
      0
      2
      0
      0
      0 x 8080000000000000
     
      99759
     
     
      System
      VISTALAP
     
   
   
      Windows Firewall
      %%d Ko
   
  

  Repository is consistent.

  Suggestions?

  Hi dynameme,

  What is a home or work computer? Is there any server/domain mean?

  Try a startup repair, it sounds as if you have an error with the help user account to run the service.  Startup Repair may be able to fix this.  If this isn't the case, then you should try to repair the Installation.

  STARTUP REPAIR

  If you have a Windows 7 installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows 7 installation disc:

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Installation of Windows 7 repair

  Information

  This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system.
  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Device drivers - make sure you have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose your themes custom because no permisions on the old themes. Go to the themes folder hidden in C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/themes, then take ownership of the folder themes and you have now all your themes back.
  • It was reported that you can also lose your Media Center gadget after doing the repair facility.

  WARNING

  You will not be able to do a repair installation of upgrade mode without failure. Installation of Windows 7 DVD that allows you to do repair installation with must be the same or more recent Windows 7 update (ex: level updates Windows or MS) that the currently installed Windows 7. If the DVD is an older version, then you can not do a repair with her installation. You must have at least 8.87 GB of free space, more if you have a larger facility, on the hard drive that Windows 7 is installed on do a repair installation.

  Here's how:

  1. start Windows 7 and log on to an administrator account.

  2 disable the 3rd firewall, antivirus or other security program to avoid what it possibly to prevent the installation of repair of Windows 7 upgrade.

  3. place your installation of Windows 7 in DVD Player DVD while in Windows 7 (step 1) and click on the option of setup.exe run in the AutoPlay window in the currently installed Windows 7. (See screenshot below)

  NOTE: If the AutoPlay window does not open, then open the folder on the drive in the computer and run the setup.exe file.

  4. click on the install button now to start the installation. (See screenshot below)

  5. clear the I want to help make Windows installation better area (unless you want), then click the go online to get the latest updates for the installation option. (See screenshot below)

  6. Windows 7 will now check online and install the available installation updates. (See screenshots below)

  7. check the I accept the license terms box, and click Next. (See screenshot below)

  8. click on the upgrade option. (See screenshot below)

  9. installation of Windows 7 will now begin. (See screenshot below)

  NOTE: During the installation, your screen may flash, and the computer will restart several times.

  10. after the final reboot, you will see this screen for a while. (See screenshot below)

  11. Enter your Windows 7 product key number. (See screenshot below step 12)

  12. uncheck the automatically activate Windows when I'm online box unchecked, and then click the next button. (See screenshot below)

  NOTE: You can activate Windows 7 later after you make sure that it runs correctly. (See step 19 below)

  If you chose to automatically activate Windows online when you set up your computer, automatic activation begins trying to activate your copy of Windows three days after you sign in for the first time.

  13. click on the settings recommended. (See screenshot below)

  14 select your time zone and set your date and time settings, and then click the next button. (See screenshot below)

  15. click on the option for the location of your computer select the settings appropriate to apply to this place network location type. (See screenshot below)

  NOTE: It is best to choose a Public place for the best security.

  16 Windows 7 will now prepare your desktop so that it starts. (See screenshots below)

  17 check if you are missing files from the user. If you are, then you can copy them from the C:\Windows.old or protected which is hidden, C:\$INPLACE.~TR operating system and files backup C:\WINDOWS.~Q. (see screenshot below)

  18. If the power goes out step 17, then you can run Disk Cleanup. You will need to click on the own key file system first and then check that the files ignored by Windows upgrade previous installations of Windows and Windows upgrade log files boxes. (See screenshot below)

  NOTE: This will remove files C:\Windows.old, C:\$INPLACE.~TR, and C:\WINDOWS.~Q from step 17 above.

  19 refresh your performance Windows (WEI) index score.

  20. when completed, all you need to do is to activate Windows 7.

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I avoid that Ginger Proofread starts automatically when the computer is turned on?

  I bought this program and you want to use it whenever I need to replay. But it always starts automatically when the computer is turned on, and because I sign, it restarts every 10 minutes after I killed him, asking me to connect.

  I can't find it in the start menu. Interface of the program itself does not give me an option to change the setting to start on demand. I wrote for the developer, no answer. I don't want to uninstall it. So, I wonder where I can go and change the setting?

  Thank you very much

  Yan

  Also look in the scheduling of the task to see if she herself put there.

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  See you soon.

• FCAC's services may not start automatically

  I had to manually start two services < DB_NAME > _RPT, < DB_NAME > _SRV on a RAC. It has been for a while now, because it happened after the interview. Looking for a way to autostart.

     

  All services are already enabled by

  srvctl enable service d < database name > < service > s

  Also checked 

  srvctl config service d < database name > < service > s

  and it does not show "The Service is activated".

  'crsctl enable the crs' and checked

  / etc/Oracle/scls_scr/RAC1/root/crsstart, also shows "enable".

  But services may not start automatically...

  The database is Active data guard and services on the primary database always start automatic without problem.

  
  

  Thank you!
  

  Hi David,

  This service does not start until the role of the service is changed to physical_standby, as shown below:

  srvctl config service d s _RPT

  Service name: _RPT

  The service is activated

  Server pool: __RPT

  Cardinality: 4

  Disconnect: false

  The service role: PRIMARY

  Management policy: AUTOMATIC

  DTC transaction: false

  Notifications of AQ HA: fake

  Failover type: NONE

  Failover method: NONE

  TAF failover attempts: 0

  TAF failover time: 0

  Objective connection of balancing: LONG

  Goal of balancing Runtime: NO

  Governed by a policy JOB: NONE

  Edition:

  Favorite instances: 1,2,3,4

  Available forums:

  So change to this service as:

  srvctl change service d s _RPT-l physical_standby

  With this setting, your database will this service upwards and running when it is in this role, but do not forget that when the ADG to be the principal changes, this service will not be upward, then you must set up another GOLD make this static service on the listener.

  Kind regards.

• Linux-start automatic db at the start of the server. Help, please.

  Hi all
  
  The database server is Ubuntu linux 9.04 and database is 11.1.0.6. I'm new to Linux. I'm working on automatically start the PB server to start and stop db when plugging the server down.
  
  I did the following steps by following the instructions in the following doc:
  
  http://download-UK.Oracle.com/docs/CD/B19306_01/server.102/b15658/strt_stp.htm#BABGDGHF
  
  (1) logon as root
  (2) to change to/etc/oratab
  3) change directory to /etc/init.d
  (4) create a file called released
  The file looks like (not identical
  
  #! / bin/sh
  #
  ORA_OWNER = oracle
  ORACLE_HOME = / u01/app/oracle/ora_11g
  
  case $1 in
  'Start')
  Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbstart $ORACLE_HOME.
  ;;
  'stop')
  Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbshut $ORACLE_HOME.
  ;;
  *)
  echo "use: $0 {start |}". stop}.
  output
  ;;
  ESAC
  #
  Output
  
  (5) change the file released to OSDBA group
  chgrp released dba
  chmod released 570
  
  (6) create symbolic links to the released script
  
  # ln s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
  # ln s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
  # ln s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
  # ln s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
  
  I tested by logging in as root and go to the /etc/init.d directory and run the following commands and both work very well.
  
  . / released early
  . / stop released
  
  But when I reboot the server that the database is not started automatically. Can someone please help?
  
  Thank you very much
  
  Shirley

  Try using the steps in this article and see if it works for you,
  http://Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

  HTH
  Aman...

• starts automatically after a power failure

  Hello, I use a Macbook pro 8.1 13 "(A1278)"

  I need 'start automatically after a power failure' work as below

  

  Bun, my macbook can't activate this function. I can't find the same box. Check the screenshot below.

  

  I'm looking for the options "start automatically after a power failure".

  This feature appears to be available only for the Mac desktop.

• Why pictures start automatically on reboot? I never use it and it does not appear in the startup folder.

  Why photos starts automatically when you restart. It is NOT in the folder.so of starting, why what is happening? I never use photos, so it's a loss of memory perfectly!

  Perhaps you have a device with linked images that attempts to import Photos?

  Also where the startup folder did you check?

• How can I get Thunderbird to start automatically when I start Windows

  I would like to than Thunderbird to start automatically whenever I start Windows running. It is how I get my calendar early alerts.

  This would be a feature of Windows rather than a feature of Thunderbird.
  http://Windows.Microsoft.com/en-us/Windows/run-program-automatically-Windows-starts#1TC=Windows-7

• How to start automatically at startup of firefox?

  I want the browser to start automatically when I start my computer. I use Win 7:

  Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
  

  Processor: Pentium Dual-Core processor T4400 2.20 GHz, x 64 family 6 model 23 Stepping 10
  Number of processors: 2
  RAM: Mb 1977
  Graphics card: Mobile Intel (r) 4 Series Express Chipset Family, 796 MB
  Hard disks: C: Total - 102373 MB, free - Mo 76724; Total D: - Mo 135998, Free - 131923 MB;
  Motherboard: Acer, Aspire 4736Z
  Antivirus: avast! Antivirus updated and active

  Thanks, Dave

  DaveLeonard:

  This should help:

  • http://Windows.Microsoft.com/en-us/Windows/run-program-automatically-Windows-starts#1TC=Windows-7

• How can I get Firefox starts automatically when you start of OS 10.6.8 on iMac?

  Have been hunting everywhere for certain types of file on the system so that Firefox should start automatically when the computer starts. Find anything obvious. Any suggestions?

  See http://www.apple.com/findouthow/mac/#appstartup